into  quad.opbmk:/mnt/raid/alik/MySQL/devel/5.0-rt-merged


sql/sql_delete.cc:
  Auto merged

The problem is that unimplemented WIN32 version of pthread_kill
is returning ESRCH no matter the arguments, causing calls to
mysqld_list_processes to set the procinfo to dead because
pthread_kill returns non zero. The dead procinfo would show
up on a second invocation of show processlist.


include/my_pthread.h:
  When unimplemented, pthread_kill must return zero for
  any process id other then zero.

into  quad.opbmk:/mnt/raid/alik/MySQL/devel/5.0-rt-merged


libmysql/libmysql.c:
  Auto merged
sql-common/client.c:
  Auto merged
tests/mysql_client_test.c:
  Manually merged.

sql/sql_prepare.cc:
  Don't send unexpected error to the client.

The problem was that the COM_STMT_SEND_LONG_DATA was sending a response
packet if the prepared statement wasn't found in the server (due to
reconnection). The commands COM_STMT_SEND_LONG_DATA and COM_STMT_CLOSE
should not send any packets, even error packets should not be sent since
they are not expected by the client API.

The solution is to clear generated during the execution of the aforementioned
commands and to skip resend of prepared statement commands. Another fix is
that if the connection breaks during the send of prepared statement command,
the command is not sent again since the prepared statement is no longer in the
server.


libmysql/libmysql.c:
  The mysql handle might be reset after a reconnection.
  Pass the now used stmt argument to cli_advanced_command.
sql-common/client.c:
  Don't resend command if the connection broke and it's a prepared
  statement command. If the session is broken, prepared statements
  on the server are gone, set the error accordanly.
sql/sql_prepare.cc:
  Clear any error set during the execution of the request
  command.
tests/mysql_client_test.c:
  Fix memory leak by freeing result associated with statement.
  Remove test case for Bug 29948 because it's not reliable in
  5.0 (fixed in 5.1) due to KILL queries sending two packets for
  a thread that kills itself.

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.0-rpl

  
Disable test case for bug 29948, which is causing sporadically
failures in other tests inside mysql_client_test.


tests/mysql_client_test.c:
  Disable test case.

  
In cases when TRUNCATE was executed by invoking mysql_delete() rather
than by table recreation (for example, when TRUNCATE was issued on
InnoDB table with is referenced by foreign key) triggers were invoked.
In debug builds this also led to crash because of an assertion, which
assumes that some preliminary actions take place before trigger 
invocation, which doesn't happen in case of TRUNCATE.

The fix is not to execute triggers in mysql_delete() when this
function is used by TRUNCATE.


mysql-test/r/trigger-trans.result:
  Update result file.
mysql-test/t/trigger-trans.test:
  A test case for Bug#34643: TRUNCATE crash if trigger and foreign key.
sql/sql_delete.cc:
  Do not process triggers in TRUNCATE.

into  kaamos.(none):/data/src/opt/mysql-5.0-opt

into  kaamos.(none):/data/src/opt/mysql-5.0-opt


client/mysql.cc:
  Auto merged
sql/filesort.cc:
  Auto merged
sql/item.cc:
  Auto merged
sql/item.h:
  Auto merged
sql/item_func.cc:
  Auto merged
sql/mysqld.cc:
  Auto merged
sql/sql_parse.cc:
  Auto merged
sql/sql_yacc.yy:
  Auto merged
tests/mysql_client_test.c:
  Auto merged
mysql-test/r/view.result:
  Manual merge.
mysql-test/t/view.test:
  Manual merge.
scripts/mysql_config.sh:
  Manual merge.

into  kaamos.(none):/data/src/opt/mysql-4.1-opt

Problem: if the IO slave thread is attempting to connect,
STOP SLAVE waits for the attempt to finish. 
It may take a long time.
Fix: don't wait, stop the slave immediately.


sql/slave.cc:
  Send a SIGALRM signal to the slave thread when stopping it (using
  pthread_kill()). This breaks current socket(), connect(), poll() etc.
  calls, and makes the subsequent thd->awake() call effective.
  
  Also, move the definition of KICK_SLAVE to slave.cc.
sql/sql_repl.h:
  Removed KICK_SLAVE and inlined it in slave.cc because:
   - it was only called once, so better to make it local to where it is used
   - it needed to include a preprocessor conditional in the middle

into  mysql.com:/misc/mysql/34749/50-34749


mysql-test/r/func_misc.result:
  Auto merged
mysql-test/t/func_misc.test:
  Auto merged
sql/item.cc:
  Auto merged
sql/item.h:
  Auto merged

into  mysql.com:/misc/mysql/29645/50-29645

into  kaamos.(none):/data/src/opt/mysql-5.0-opt

Affected tests fixing. After the fix for st_relay_log_info::wait_for_pos() that
handles widely used select('master-bin.xxxx',pos) invoked by mysqltest
there appeared to be four tests that either tried synchronizing when
the slave was stopped or used incorrect synchronization method like
to call `sync_with_master' from the current connection being to the
master itself.

Fixed with correcting the current connection or/and using the correct
synchronization macro when possible.


mysql-test/r/rpl_loaddata.result:
  results changed
mysql-test/r/rpl_slave_status.result:
  results changed
mysql-test/t/rpl_loaddata.test:
  fixing cleanup for two tests
mysql-test/t/rpl_skip_error.test:
  fixing cleanup for two tests
mysql-test/t/rpl_slave_status.test:
  fixing cleanup
mysql-test/t/rpl_temporary.test:
  fixing synchronizations to use the intended correct macro.

into  magare.gmz:/home/kgeorge/mysql/autopush/B34909-5.0-opt

  --master-data

No error code was returned by mysqldump if it detects that binary
logging is not enabled on the server.
Fixed by returning error code.


client/mysqldump.c:
  Bug #34909: add error code
mysql-test/r/mysqldump-no-binlog.result:
  Bug #34909: test case
mysql-test/t/mysqldump-no-binlog-master.opt:
  Bug #34909: test case
mysql-test/t/mysqldump-no-binlog.test:
  Bug #34909: test case

into  mysql.com:/home/psergey/mysql-5.0-bug34945

MASTER_POS_WAIT return values are different than expected when the server is not a slave. 
It returns -1 instead of NULL.

Fixed with correcting  st_relay_log_info::wait_for_pos() to return the proper
value in the case of rli info is not inited.


mysql-test/r/rpl_master_pos_wait.result:
  results changed
mysql-test/t/rpl_master_pos_wait.test:
  the new test to check that select master_pos_wait() to a server does 
  not have master info returns NULL as specified.
sql/slave.cc:
  changing the return value to correspond the specification.

Disable test case for bug 29948, which is causing sporadically
failures in other tests inside mysql_client_test.


tests/mysql_client_test.c:
  Disable test case.

                    sporadically

Under some circumstances, the mysql_insert_id() value after SELECT ...
INSERT could return a wrong value. This could happen when the last
SELECT ... INSERT did not involve an AUTO_INCREMENT column, but the
value of mysql_insert_id() was changed by some previous statements.

Fixed by checking the value of thd->insert_id_used in
select_insert::send_eof() and returning 0 for mysql_insert_id() if it
is not set.


sql/sql_insert.cc:
  Do not return thd->last_insert_id unconditionally in
  select_insert::send_eof(). First check if thd->insert_id_used is
  non-zero, and return 0 otherwise.
tests/mysql_client_test.c:
  Added a test case for bug #34889.

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.0-rpl

mysql-test/t/mysql_client_test.test:
  Rename mysql_client_test output file to mysql_client_test.out.log

It's impossible to determine which test inside mysql_client_test
failed if the log file is overwritten by mysqltest when dumping
the test case results. Redirect mysql_client_test output to a
separate file.


mysql-test/t/mysql_client_test.test:
  Redirect mysql_client_test output to a separate log file so
  it doesn't get overwritten by mysqltest.

- Apply Eric Bergen's patch: in join_read_always_key(), move ha_index_init() call
  to before the late NULLs filtering code.
- Backport function comments from 6.0.


mysql-test/r/null_key.result:
  BUG#34945: "ref_or_null queries that are null_rejecting and have a null value crash mysql"
  - Testcase
mysql-test/t/null_key.test:
  BUG#34945: "ref_or_null queries that are null_rejecting and have a null value crash mysql"
  - Testcase
sql/sql_select.cc:
  BUG#34945: "ref_or_null queries that are null_rejecting and have a null value crash mysql"
  - Apply Eric Bergen's patch: in join_read_always_key(), move ha_index_init() call
    to before the late NULLs filtering code.
  - Backport function comments from 6.0

into  kaamos.(none):/data/src/opt/mysql-5.0-opt

                    with errno 17

my_create() did not perform any checks for the case when a file is
successfully created by a call to open(), but the call to
my_register_filename() later fails because the number of open files
has exceeded the my_open_files limit. This can happen on platforms 
which do not have getrlimit(), and hence we do not know the real limit
for open files. In such a case an error was returned to a caller
although the file has actually been created. Since callers assume
my_create() to return an error only when it failed to create a file,
they did not perform any cleanups, leaving an 'orphaned' file on the
file system.

Fixed by adding a check for the above case to my_create() and ensuring
the newly created file is deleted before returning an error.

Creating a deterministic test case in the test suite is impossible,
because the exact steps required to reproduce the above situation
depend on the platform and/or environment (OS per-user limits, queries
executed by previous tests, startup parameters). The patch was
manually tested on Windows using examples posted in the bug report.


mysys/my_create.c:
  Ensure that, if the call to my_register_filename() in my_create()
  failed, but the previous open() called succeeded, the newly created
  file is deleted before returning an error.

mysql-test/r/mysqldump.result:
  updated result
mysql-test/t/mysqldump.test:
  hide master_log_pos number

into  host.loc:/home/uchum/work/5.0-opt

into  mysql.com:/home/gluh/MySQL/Merge/5.0-opt


mysql-test/t/symlink.test:
  Auto merged
mysql-test/r/symlink.result:
  after merge fix

mysql-test/r/symlink.result:
  result fix

                  and Item_direct_ref constructor calls.

Order of ref->field_name and ref->table_name arguments
is of Item_ref and Item_direct_ref in the fix_inner_refs
function is inverted.


sql/sql_select.cc:
  Fixed bug #34830: mixed table and field names in Item_ref
                    and Item_direct_ref constructor calls.
  
  Order of ref->field_name and ref->table_name arguments
  is of Item_ref and Item_direct_ref in the fix_inner_refs
  function is inverted. See definitions:
  
    Item_ref(Name_resolution_context *context_arg, Item **item,
             const char *table_name_arg, const char *field_name_arg,
             bool alias_name_used_arg= FALSE)
    and
  
    Item_direct_ref(Name_resolution_context *context_arg, Item **item,
                    const char *table_name_arg,
                    const char *field_name_arg,
                    bool alias_name_used_arg= FALSE)

into  mysql.com:/home/gluh/MySQL/Merge/5.0-opt


sql/mysql_priv.h:
  Auto merged
mysql-test/r/symlink.result:
  manual merge
mysql-test/t/symlink.test:
  manual merge
sql/mysqld.cc:
  manual merge
sql/sql_parse.cc:
  manual merge

added new function test_if_data_home_dir() which checks that
path does not contain mysql data home directory.
Using of mysql data home directory in
DATA DIRECTORY & INDEX DIRECTORY is disallowed.


mysql-test/r/symlink.result:
  test result
mysql-test/t/symlink.test:
  test case
sql/mysql_priv.h:
  new variable mysql_unpacked_real_data_home
sql/mysqld.cc:
  new variable mysql_unpacked_real_data_home
sql/sql_parse.cc:
  added new function test_if_data_home_dir() which checks that
  path does not contain mysql data home directory.
  Using of mysql data home directory in
  DATA DIRECTORY & INDEX DIRECTORY is disallowed.