The only purpose of ibuf_bitmap_mutex is to prevent a deadlock between
two concurrent invocations of ibuf_update_free_bits_for_two_pages_low()
on the same pair of bitmap pages, but in opposite order.
The mutex is unnecessarily serializing the execution of the function
even when it is being invoked on totally different tablespaces.
To avoid deadlocks, it suffices to ensure that the two page latches
are being acquired in a deterministic (sorted) order.

if the view has algorithm=temptable it is not updatable,
so DEFAULT() for its fields is meaningless,
and thus it's NULL or 0/'' for NOT NULL columns.

The following condition has to added:
1) InnoDB fails to include the offset of the node pointer field
in non-leaf record for redundant row format.

2) If the Fixed length field does have only prefix length then
calculate the field maximum size as prefix length.

- Added the test case to test (2) and to check maximum number of
fields can exist in the index.

MDEV-28314 : The Galera cluster primary node goes into hang mode when innodb_encryption_threads is enabled

When we enable writes after Galera SST srv_n_fil_crypt_threads needs
to be set temporally to 0 (as was done when writes were disabled)
to make sure that encryption threads will be really started based
on old value of encryption threads.

Fix provided by Marko Mäkelä.

because CONTEXT_ANALYSIS_ONLY_VCOL_EXPR can be used only for,
exactly, context analysys. Items fixed that way cannot be evaluated.
But vcols are going to be evaluated, so they have to be fixed properly,
for evaluation.

add test

Starting with 10.3, an assertion would fail on the rollback of
a recovered incomplete transaction if a table definition violates
a FOREIGN KEY constraint.

DICT_ERR_IGNORE_RECOVER_LOCK: Include also DICT_ERR_IGNORE_FK_NOKEY
so that trx_resurrect_table_locks() will be able to load
table definitions and resurrect IX locks. Previously, if the
FOREIGN KEY constraints of a table were incomplete, the table
would fail to load until rollback, and in 10.3 or later an assertion
would fail that the rollback was not protected by a table IX lock.

Thanks to commit 9de2e60d there
will be no problems to enforce subsequent FOREIGN KEY operations
even though a table with invalid REFERENCES clause was loaded.

column generated using date_format() and if()

vcol_info->expr is allocated on expr_arena at parsing stage. Since
expr item is allocated on expr_arena all its containee items must be
allocated on expr_arena too. Otherwise fix_session_expr() will
encounter prematurely freed item.

When table is reopened from cache vcol_info contains stale
expression. We refresh expression via TABLE::vcol_fix_exprs() but
first we must prepare a proper context (Vcol_expr_context) which meets
some requirements:

1. As noted above expr update must be done on expr_arena as there may
be new items created. It was a bug in fix_session_expr_for_read() and
was just not reproduced because of no second refix. Now refix is done
for more cases so it does reproduce. Tests affected: vcol.binlog

2. Also name resolution context must be narrowed to the single table.
Tested by: vcol.update main.default vcol.vcol_syntax gcol.gcol_bugfixes

3. sql_mode must be clean and not fail expr update.

sql_mode such as MODE_NO_BACKSLASH_ESCAPES, MODE_NO_ZERO_IN_DATE, etc
must not affect vcol expression update. If the table was created
successfully any further evaluation must not fail. Tests affected:
main.func_like

Reviewed by: Sergei Golubchik <serg@mariadb.org>

1. moved fix_vcol_exprs() call to open_table()

mysql_alter_table() doesn't do lock_tables() so it cannot win from
fix_vcol_exprs() from there. Tests affected: main.default_session

2. Vanilla cleanups and comments.

UNION ALL queries are a subject of optimization introduced in MDEV-334
when creation of a temporary table is skipped.
While there is a check for this optimization in Explain_union::print_explain()
there was no such in Explain_union::print_explain_json(). This resulted in
printing irrelevant data like:
  "union_result": {
    "table_name": "<union2,3>",
    "access_type": "ALL",
    "r_loops": 0,
    "r_rows": null
in case when creation of the temporary table was actually optimized out.
This commits adds a check whether the temporary table was actually created
during the UNION ALL processing and eliminates printing of the irrelevant data.

Removed prohibition of creating temporary field of Item_default_value
(added by mistake by 1d9b043a fix of
MDEV-10780 and MDEV-11265).

When fixing vcols, fix_fields might call convert_const_to_int().
And that will try to read the field value (from record[0]).
Mark the table as having no data to prevent that, because record[0]
is not initialized yet.

the bug was that in_vector array in Item_func_in was allocated in the
statement arena, not in the table->expr_arena.

revert part of the 5acd391e. Instead, change the arena correctly
in fix_all_session_vcol_exprs().

Remove TABLE_ARENA, that was introduced in 5acd391e to force
item tree changes to be rolled back (because they were allocated in the
wrong arena and didn't persist. now they do)

* Item_default_value::fix_fields creates a copy of its argument's field.
* Field::default_value is changed when its expression is prepared in
  unpack_vcol_info_from_frm()

This means we must unpack any vcol expression that includes DEFAULT(x)
strictly after unpacking x->default_value.

To avoid building and solving this dependency graph on every table open,
we update Item_default_value::field->default_value after all vcols
are unpacked and fixed.

bt full - to include args and locals.

set print sevenbit on
  - it is more useful to be able to see the exact bytes
    (in case something is dumped as a string and not hexadecimal digits)
set print static-members off
  - there are many interesting (non-const) static members
set frame-arguments all
  - even non-printables are useful to see.

Let's make our bb logs give a little bit more detail on those
hard to reproduce bugs.

Tests on rhel7's gdb-7.6.1-120.el7

An additional patch for MDEV-27690 Crash on `CHARACTER SET csname COLLATE DEFAULT` in column definition

Applying the fix to sql_yacc_ora.yy. Adding a test for sql_mode=ORACLE.

on_table_fill_finished() should always be done at the end of open()
even if result is not Select_materialize but (for example)
Select_fetch_into_spvars.

This is conceptually a backport of
commit 6f4740fd
(re-recording the .rdiff files).

This commit fixes problems with parsing ipv6 addresses given via
the wsrep_sst_receive_address and wsrep_node_address options.

Also, this commit removes extra lines in the configuration files
in the mtr test suites for Galera related to these parameters.

fix bad merge

MDEV-24317 Data race in LOGGER::init_error_log at sql/log.cc:1443 and in LOGGER::error_log_print at sql/log.cc:1181

don't initialize error_log_handler_list in set_handlers()
* error_log_handler_list is initialized to LOG_FILE early, in init_base()
* set_handlers always reinitializes it to LOG_FILE, so it's pointless
* after init_base() concurrent threads start using sql_log_warning,
  so following set_handlers() shouldn't modify error_log_handler_list
  without some protection

I change from `exit;` to `exit(1);` on a function `usage()`.
When we try to run mtr with a wrong option, a function `usage()` is called with the wrong option as its argument. In this case, because the function call `exit` in a first if statement, we get exit status 0.

This is a temporary fix for 10.2.
This problem was permanently fixed in 10.9 under terms of MDEV-27743.

This patch should propagate up to 10.8 then null-merged to 10.9.

The issue was that the value of MARIA_FOUND_WRONG_KEY was a value
that could be returned by ha_key_cmp.

This was already fixed in MyISAM, now using the same fix in Aria:
Setting the value to INT_MAX32, which should be impossible in any
normal cases.

I also fixed so that if there is a wrong key, we now get a proper error
message and not an assert.

Creating a temporary table with Spider is non-sense because a Spider
table cannot hold any physical data and it requires an additional
effort to manage even if it is configured correctly.

Set HTON_TEMPORARY_NOT_SUPPORTED to spider_hton->flags.  

Reviewed-by: nayuta.yanagisawa@hey.com
Co-authored-by: d8sk4ueun@gmail.com

This crash happens on a combination of multiple conditions:

- There is a thead#1 running an "ANALYZE FORMAT=JSON" query for a
  "SELECT .. FROM INFORMATION_SCHEMA.COLUMNS WHERE .. "
- The WHERE clause contains a stored function call, say f1().
- The WHERE clause is built in the way so that the function f1()
  is never actually called, e.g.
    WHERE .. AND (TRUE OR f1()=expr)
- The database contains multiple VIEWs that have the function f1() call,
  e.g. in their <select list>
- The WHERE clause is built in the way so that these VIEWs match
  the condition.
- There is a parallel thread#2 running. It creates or drops or recreates
  some other stored routine, say f2(), which is not used in the ANALYZE query.
  It effectively invalidates the stored routine cache for thread#1
  without locking.
  Note, it is important that f2() is NOT used by ANALYZE query.
  Otherwise, thread#2 would be locked until the ANALYZE query
  finishes.

When all of the above conditions are met, the following happens:

1. thread#1 starts the ANALYZE query. It notices a call for the stored function
   f1() in the WHERE condition. The function f1() gets parsed and cached
   to the SP cache. Its address also gets assigned to Item_func_sp::m_sp.

2. thread#1 starts iterating through all tables that
   match the WHERE condition to find the information about their columns.

3. thread#1 processes columns of the VIEW v1.
   It notices a call for f1() in the VIEW v1 definition.
   But f1() is already cached in the step#1 and it is up to date.
   So nothing happens with the SP cache.

4. thread#2 re-creates f2() in a non-locking mode.
   It effectively invalidates the SP cache in thread#1.

5. thread#1 processes columns of the VIEW v2.
   It notices a call for f1() in the VIEW v2 definition.
   It also notices that the cached version of f1() is not up to date.
   It frees the old definition of f1(), parses it again, and puts a
   new version of f1() to the SP cache.

6. thread#1 finishes processing rows and generates the JSON output.
   When printing the "attached_condition" value, it calls
   Item_func_sp::print() for f1(). But this Item_func_sp links
   to the old (freed) version of f1().

The above scenario demonstrates that Item_func_sp::m_sp can point to an
alredy freed instance when Item_func_sp::func_name() is called,
so accessing to Item_sp::m_sp->m_handler is not safe.

This patch rewrites the code to use Item_func_sp::m_handler instead,
which is always reliable.

Note, this patch is only a cleanup for MDEV-28166 to quickly fix the regression.
It fixes MDEV-28267. But it does not fix the core problem:
The code behind I_S does not take into account that the SP
cache can be updated while evaluating rows of the COLUMNS table.
This is a corner case and it never happens with any other tables.
I_S.COLUMNS is very special.

Another example of the core problem is reported in MDEV-25243.
The code accesses to Item_sp::m_sp->m_chistics of an
already freed m_sp, again. It will be addressed separately.

MDEV-22282 When using mysqldump to backup a view that contains derived tables, the database name is prepended to each table in the view

derived tables have db = "", table_name = "*", those aren't real names
to be compared with.

The partitioning engine does not support the table-level DATA/INDEX
DIRECTORY specification.

If one create a non-partitioned table with the DATA/INDEX DIRECTORY
option and then performs ALTER TABLE ... PARTITION BY on it, the
DATA/INDEX DIRECTORY specification of the old schema is ignored.

The behavior might be a bit surprising for users because the value
of a usual table option applies to all the partitions. Thus, we raise
a warning on such ALTER TABLE ... PARTITION BY.

Adding an MTR test only.

This problem was earlier fixed by the patch for:
  MDEV-28078 Garbage on multiple equal ENUMs with tricky character sets

The original query "SELECT IF(COUNT(a.`id`)>=0,'Y','N') FROM t" is
transformed to "SELECT COUNT(a.`id`), IF(ref >= 0, 'Y', 'N') FROM t",
where ref is Item_ref to "COUNT(a.`id`)", by split_sum_func().

Spider walks the item list twice, invoking spider_db_print_item_type().
The first invocation is in spider_create_group_by_handler() with
str == NULL. The second one is in spider_group_by_handler::init_scan()
with str != NULL.

spider_db_print_item_type() prints nothing at the first invocation,
and it prints item at the second invocation. However, at the second
invocation, the above mentioned ref to "COUNT(a.`id`)" points to
a field in a temporary table where the result will be stored. Thus,
to look behind the item_ref, Spider need to generate the query earlier.

A possible fix would be to generate a query to send in
spider_create_group_by_handler(). However, the fix requires a
considerable amount of changes of the Spider's GROUP BY handler.
I'd like to avoid that.

So, I fix the problem by not to use the GROUP BY handler when a
query contains Item_ref whose table_name, name, and alias_name_used
are not set.

Currenly SST script for mariabackup stops on any failure while archiving
logs, e.g. when unable to create directory, insufficient permissions, gzip
failure, etc. However, in case of such problems, the script should issue
a warning and continue without archiving, but not exit with a fatal error.

This commit adds this fix to the SST script for mariabackup.

This failure was caused by MDEV-25975, which removed the parameter
innodb_disallow_writes.

Added a check for wsrep_sst_disable_writes to the function
ibuf_merge_in_background().