changes for an assert and an updated results file.


mysql-test/r/mix_innodb_myisam_binlog.result:
  results file changed as there is no ROLLBACK query in binlog as it must be.
sql/sql_update.cc:
  refining assert as the initial value of transactional_tables has been
  changed to zero.

into  mysql1000.dsl.inet.fi:/home/andrei/MySQL/MERGE/pushed.mysql-5.0-rpl-bug33329-extra_rollback

into  mysql1000.dsl.inet.fi:/home/andrei/MySQL/MERGE/pushed.mysql-5.0-rpl-bug33329-extra_rollback

into  mysql1000.dsl.inet.fi:/home/andrei/MySQL/MERGE/mysql-5.0-rpl-bug33329-extra_rollback

There was no instruction in the test that enforces the slave successfully connect
to the master.
The way the test was been written allowed the slave to had been late for rendezvous 
so that about-connecting time queries to the master failed and are error-logged
to had been seen in Warnings of pb.

Fixed with adding a sychronization primitive to the test.
No test case is possible, observe error logs on pb.

Todo: revise need of rpl_report.pl's rules due to failing execution of
queries from get_master_verion_and_clock().
Any test should try to use a synchornization primitive like the current fix
makes and do not let the slave to miss successful connecting.


mysql-test/t/rpl_variables.test:
  Completing the test's body with a synch macro to not let
  the slave to miss the successful connecting to the master.

slash in filenames also for Create_file_log_event.


client/mysqlbinlog.cc:
  BUG#34355: mysqlbinlog outputs backslash as path separator for 4.1 binlogs
  Problem: When the windows version of mysqlbinlog reads 4.1 binlogs
  containing LOAD DATA INFILE, it outputs backslashes as path separators in
  filenames. However, the output is typically piped to a client, and client
  expects forward slashes.
  Fix: Replace '\\' by '/' in filenames.

    to leave

The artifact was caused by
a flaw in concurrent accessing the slave's io thd by
the io itself and a handling show slave status thread.
Namely, show_master_info did not acquire mi->run_lock mutex that is
specified for mi->io_thd member.

Fixed with deploying the mutex locking and unlocking. The mutex is kept
short time and without interleaving with mi->data_lock mutex.

Todo: to report and fix an issue with 
    sys_var_slave_skip_counter::{methods} 
seem to acquire incorrectly
     active_mi->rli.run_lock
instead of the specified
     active_mi->rli.data_lock

A test case is difficult to compose, so rpl_packet should continue serving
as the indicator.


sql/slave.cc:
  implementing a TODO left at 4.1 time:
  mending access to mi->io_thd with the specified mutex;
sql/slave.h:
  adding a member name to the list of that run_lock guards.

            does not use trans tables

There had been two issues.
Rollback statement was recorded in binlog even though a multi-update
had not modified any non-transactional table.
The reason for this artifact was a false initial value of multi_update::transactional_tables.
Yet another artifact that explained on the bug page is that 
`ha_autocommit_or_rollback' works differently depending on whether
a transaction engine has been compiled in. 

Fixed: with setting multi_update::transactional_tables to zero at initialization
time. Multi-update on non-trans table won't cause ROLLBACK in binlog with
either compilation option.

The 2nd mentioned artifact comprises a self-standing issue (to be reported
separately).


mysql-test/r/multi_update.result:
  results changed - there is no ROLLBACK in binlog anymore as it should be
sql/sql_update.cc:
  A wrong assumption on that there were modified transactional table,
  which is nonsense at the very beginning of the query execution.

the reason for the failure were incorrect asserts.

Removing asserts altogether as there is no the implication does not hold
(as explained in the comments for the file).


sql/sql_delete.cc:
  removing two asserts because they can not hold basing on the definition
  of `normal_tables'. The one does not specify in a non-transactional table,
  which must be in the list of tables to be deleted, is modified indeed.
  So, it's possible to have normal_tables == true and deleted == true both
  but that would be yet a transactional table got modified (and then
  thd->transaction.stmt.modified_non_trans_table remains false default).

mysql-test/r/rpl_user.result:
  Result change.

mysql-test/t/rpl_user.test:
  Removing redundant reset master and deleting users from master
  and slave without using binary log.

into  mysql_cab_desk.:D:/source/c++/mysql-5.0-rpl-merge

This patch adds code to convert the path for LOAD DATA INFILE 
events to a Unix path which is needed for running mysql client
on Windows. 


client/mysqlbinlog.cc:
  BUG#32205 : Replaying statements from mysqlbinlog fails with a syntax error, replicates fine
  
  This patch adds code to convert the path for LOAD DATA INFILE 
  events to a Unix path which is needed for running mysql client
  on Windows. 
  
  The 'd:\x\y\z' path becomes 'd:xyz' when run in the client.

on the context.


mysql-test/r/mysqlbinlog.result:
  Result file change.
mysql-test/t/mysqlbinlog.test:
  Blanking out yet some numbers in file names.

mysql-test/r/mysqlbinlog.result:
  Result file change.
mysql-test/t/mysqlbinlog.test:
  Fixing test to not be dependent on the sequence numbers
  for file names generated by mysqlbinlog.

mysql-test/r/mix_innodb_myisam_binlog.result:
  Result change
mysql-test/t/binlog_start_comment.test:
  Adding --local-load to mysqlbinlog to prevent it from failing
  on Windows. Also adding --short-form.
mysql-test/t/mix_innodb_myisam_binlog.test:
  Extending LIKE pattern to use either \n or \r\n in order to work
  on Windows.

mysql-test/t/binlog_start_comment.test:
  Adding --local-infile=1 to enable local infile for mysql client.

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.0-rpl-merge


include/my_sys.h:
  Auto merged
sql/log.cc:
  Auto merged
sql/set_var.cc:
  Auto merged
sql/sql_acl.cc:
  Auto merged

mysql-test/include/have_local_infile.inc:
  BitKeeper file /data0/mkindahl/mysql-5.0-rpl-merge/mysql-test/include/have_local_infile.inc
mysql-test/r/have_local_infile.require:
  BitKeeper file /data0/mkindahl/mysql-5.0-rpl-merge/mysql-test/r/have_local_infile.require
mysql-test/t/binlog_start_comment.test:
  Test requires that local_infile is on, so added require for that.
mysql-test/t/rpl_sp.test:
  Adding missing sync_slave_with_master causing following tests to fail.

sql/sql_repl.cc:
  Adding cast to remove compile error on Windows platform.

mysql-test/t/rpl_transaction.test:
  Test only works for debug build.

mysql-test/r/bdb_notembedded.result:
  Result change.
mysql-test/r/rpl_loaddata_map.result:
  Result change.
mysql-test/t/rpl_loaddata_map.test:
  Blanking out file id as well.

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.0-rpl-merge


include/my_sys.h:
  Auto merged
mysql-test/r/blackhole.result:
  Auto merged
mysql-test/r/case.result:
  Auto merged
mysql-test/r/mysqlbinlog2.result:
  Auto merged
mysql-test/t/blackhole.test:
  Auto merged
mysql-test/t/case.test:
  Auto merged
sql/set_var.cc:
  Auto merged
sql/sql_acl.cc:
  Auto merged
sql/sql_parse.cc:
  Auto merged

into  mail.hezx.com:/media/sda3/work/mysql/bkwork/bug26489_corruption_in_relay_log/5.0

mysql-test/r/rpl_grant.result:
  update result

Here is the scenario that causes the failure.(by Mats)

1. The to-be corrupt log event (let's call it X), is split into two
   packets B and C on the network level (net_write_buff()). The parts
   are X = (x',x''). The part x' ends up in packet B and part x''
   ends up in packet C. Prior to the corrupt event X, the event Y has
   been written successfully, but has been split into two packets as
   well, which we call (y',y'').
2. The master sends packet A = (y'',x') to the slave, increases the
   packet sequence number, the slave receives the packet, but fails
   to reply before the master gets a timeout.
3. Since the master got a timeout, it reports failure, and aborts
   sending the binary log by exiting mysql_binlog_send(). However, it
   leaves the buffer intact, still holding y'' (but not x', since the
   write_pos is not increased).
4. After exiting mysql_binlog_send(), the master does a
   disconnection of the client thread, which involves sending an
   error message e to the client (i.e., the slave).
5. In this case, net_write_buff() is used again, but this time the
   old contents of the packet is used so that the new packet is
   D = (y'',e). Note that this will use a new packet sequence number,
   since the packet number was increased in step 2.
6. The slave receives the tail y'' of the Y log event, concatenates
   this with x' (which it already received), and writes the event
   (x',y'') it to the relay log since it hasn't noticed anything is
   amiss.
7. It then tries to read more bytes, which is either e (if the length
   given for X just happened to match the length given for Y, or just
   plain garbage because the slave is out of sync with what is
   actually sent.
8. After a while, the SQL thread tries to execute the event (x',y''),
   which is very likely to be just nonsense.

The problem can be fixed by not resetting net->error after the call of 
mysql_binlog_send, so the error message will not be sent and the connection
will be closed.


sql/sql_parse.cc:
  Do not reset net->error, if net->error == 2, we should not try to use the connection again

and so that it works correctly on Windows.


mysql-test/r/mysqlcheck.result:
  Flush tables before monkeying around with underlying MyISAM data files
mysql-test/t/mysqlcheck.test:
  Fix the test case for bug #25347 so that it actually does test the behavior.
  Also, this makes it work on Windows by ensuring that mysqld doesn't hold the
  underlying MyISAM files open while we try to corrupt them on disk.
  
  Flush tables before monkeying around with underlying MyISAM data files;
  --use-frm, so that mysqlcheck will succeed.

mysql-test/t/mysqlcheck.test:
  Use --remove_file and --write_file instead of --exec rm and --exec touch.

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50


sql/sql_select.cc:
  Auto merged

The problem is when create/rename/drop users, the statement was logged regardless of error, even if no data has been changed, the statement was logged.

After this patch, create/rename/drop users don't write the binlog if the statement makes no changes, if the statement does make any changes, log the statement with possible error code.

This patch is based on the patch for BUG#29749, which is not pushed


sql/sql_acl.cc:
  when create/rename/drop users, don't write the binlog if the statement make no changes
mysql-test/r/rpl_user.result:
  New BitKeeper file ``mysql-test/r/rpl_user.result''
mysql-test/t/rpl_user.test:
  New BitKeeper file ``mysql-test/t/rpl_user.test''

into  quad.:/mnt/raid/alik/MySQL/devel/5.0-rt-merged-5.0

into  lambda.hsd1.co.comcast.net.:/home/malff/TREE/mysql-5.0-33618


mysql-test/t/sp.test:
  Auto merged
sql/sp_head.cc:
  Auto merged
sql/sql_yacc.yy:
  Auto merged

Bug 33983 (Stored Procedures: wrong end <label> syntax is accepted)

The server used to crash when REPEAT or another control instruction
was used in conjunction with labels and a LEAVE instruction.

The crash was caused by a missing "pop" of handlers or cursors in the
code representing the stored program. When executing the code in a loop,
this missing "pop" would result in a stack overflow, corrupting memory.

Code generation has been fixed to produce the missing h_pop/c_pop
instructions.

Also, the logic checking that labels at the beginning and the end of a
statement are matched was incorrect, causing Bug 33983.
End labels, when used, must match the label used at the beginning of a block.


mysql-test/r/sp-code.result:
  Bug#33618 (Crash in sp_rcontext)
mysql-test/r/sp-error.result:
  Bug 33983 (Stored Procedures: wrong end <label> syntax is accepted)
mysql-test/r/sp.result:
  Bug#33618 (Crash in sp_rcontext)
mysql-test/t/sp-code.test:
  Bug#33618 (Crash in sp_rcontext)
mysql-test/t/sp-error.test:
  Bug 33983 (Stored Procedures: wrong end <label> syntax is accepted)
mysql-test/t/sp.test:
  Bug#33618 (Crash in sp_rcontext)
sql/sp_head.cc:
  Bug#33618 (Crash in sp_rcontext)
sql/sp_head.h:
  Bug#33618 (Crash in sp_rcontext)
sql/sp_rcontext.cc:
  Bug#33618 (Crash in sp_rcontext)
sql/sp_rcontext.h:
  Bug#33618 (Crash in sp_rcontext)
sql/sql_yacc.yy:
  Bug#33618 (Crash in sp_rcontext)

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50


sql/item_timefunc.cc:
  Auto merged
sql/set_var.cc:
  Auto merged
sql/sql_select.cc:
  Auto merged

Bug#25347: mysqlcheck -A -r doesn't repair table marked as crashed

mysqlcheck tests nullness of the engine type to know whether the
"table" is a view or not.  That also falsely catches tables that 
are severly damaged.

Instead, use SHOW FULL TABLES to test whether a "table" is a view
or not.

(Don't add new function.  Instead, get original data a smarter way.)

Make it safe for use against databases before when views appeared.


client/mysqlcheck.c:
  Use SHOW FULL TABLES to test better whether a name in the table
  list is one of a view.  Checking that the engine is NULL is 
  insufficient.
  
  Implemented suggestion from jimw that involved removing most of 
  original patch and getting data a better way
mysql-test/r/mysqlcheck.result:
  Verify that tables that have NULL/unreadable engine types are 
  processed and not interpreted as views.
mysql-test/t/mysqlcheck.test:
  Verify that tables that have NULL/unreadable engine types are 
  processed and not interpreted as views.

Patch by Kasper Dupont.  No CLA required for this size of patch.

"resolveip" program produces incorrect result if given a hostname
starting with a digit.  Someone seems to have thought that names 
can not have digits at the beginning.

Instead, use the resolver library to work out the rules of hostnames, 
as it will undoubtedly be better at it than we are.


configure.in:
  See if we need to a library for address lookups.
extra/resolveip.c:
  Don't use silly heuristic to know whether a string is a dotted
  quad.  Instead, pass the whole thing into the resolver and let
  its smarts do all the work.

into  zippy.cornsilk.net:/home/cmiller/work/mysql/mysql-5.0-maint


include/my_sys.h:
  Auto merged
myisam/ft_boolean_search.c:
  Auto merged
myisam/sort.c:
  Auto merged
mysql-test/mysql-test-run.pl:
  Auto merged
mysql-test/r/ctype_ucs.result:
  Auto merged
mysql-test/r/func_misc.result:
  Auto merged
mysql-test/t/ctype_ucs.test:
  Auto merged
mysql-test/t/func_misc.test:
  Auto merged
sql/ha_myisam.cc:
  Auto merged
sql/item_cmpfunc.cc:
  Auto merged
sql/item_cmpfunc.h:
  Auto merged
sql/item_strfunc.h:
  Auto merged
sql/item_timefunc.cc:
  Auto merged
sql/opt_range.cc:
  Auto merged
sql/set_var.cc:
  Auto merged
sql/set_var.h:
  Auto merged
sql/sql_acl.cc:
  Auto merged
sql/sql_select.cc:
  Auto merged
sql/sql_table.cc:
  Auto merged

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50


sql/set_var.cc:
  Auto merged