The issue was that the value of MARIA_FOUND_WRONG_KEY was a value
that could be returned by ha_key_cmp.

This was already fixed in MyISAM, now using the same fix in Aria:
Setting the value to INT_MAX32, which should be impossible in any
normal cases.

I also fixed so that if there is a wrong key, we now get a proper error
message and not an assert.

This crash happens on a combination of multiple conditions:

- There is a thead#1 running an "ANALYZE FORMAT=JSON" query for a
  "SELECT .. FROM INFORMATION_SCHEMA.COLUMNS WHERE .. "
- The WHERE clause contains a stored function call, say f1().
- The WHERE clause is built in the way so that the function f1()
  is never actually called, e.g.
    WHERE .. AND (TRUE OR f1()=expr)
- The database contains multiple VIEWs that have the function f1() call,
  e.g. in their <select list>
- The WHERE clause is built in the way so that these VIEWs match
  the condition.
- There is a parallel thread#2 running. It creates or drops or recreates
  some other stored routine, say f2(), which is not used in the ANALYZE query.
  It effectively invalidates the stored routine cache for thread#1
  without locking.
  Note, it is important that f2() is NOT used by ANALYZE query.
  Otherwise, thread#2 would be locked until the ANALYZE query
  finishes.

When all of the above conditions are met, the following happens:

1. thread#1 starts the ANALYZE query. It notices a call for the stored function
   f1() in the WHERE condition. The function f1() gets parsed and cached
   to the SP cache. Its address also gets assigned to Item_func_sp::m_sp.

2. thread#1 starts iterating through all tables that
   match the WHERE condition to find the information about their columns.

3. thread#1 processes columns of the VIEW v1.
   It notices a call for f1() in the VIEW v1 definition.
   But f1() is already cached in the step#1 and it is up to date.
   So nothing happens with the SP cache.

4. thread#2 re-creates f2() in a non-locking mode.
   It effectively invalidates the SP cache in thread#1.

5. thread#1 processes columns of the VIEW v2.
   It notices a call for f1() in the VIEW v2 definition.
   It also notices that the cached version of f1() is not up to date.
   It frees the old definition of f1(), parses it again, and puts a
   new version of f1() to the SP cache.

6. thread#1 finishes processing rows and generates the JSON output.
   When printing the "attached_condition" value, it calls
   Item_func_sp::print() for f1(). But this Item_func_sp links
   to the old (freed) version of f1().

The above scenario demonstrates that Item_func_sp::m_sp can point to an
alredy freed instance when Item_func_sp::func_name() is called,
so accessing to Item_sp::m_sp->m_handler is not safe.

This patch rewrites the code to use Item_func_sp::m_handler instead,
which is always reliable.

Note, this patch is only a cleanup for MDEV-28166 to quickly fix the regression.
It fixes MDEV-28267. But it does not fix the core problem:
The code behind I_S does not take into account that the SP
cache can be updated while evaluating rows of the COLUMNS table.
This is a corner case and it never happens with any other tables.
I_S.COLUMNS is very special.

Another example of the core problem is reported in MDEV-25243.
The code accesses to Item_sp::m_sp->m_chistics of an
already freed m_sp, again. It will be addressed separately.

MDEV-22282 When using mysqldump to backup a view that contains derived tables, the database name is prepended to each table in the view

derived tables have db = "", table_name = "*", those aren't real names
to be compared with.

Adding an MTR test only.

This problem was earlier fixed by the patch for:
  MDEV-28078 Garbage on multiple equal ENUMs with tricky character sets

The original query "SELECT IF(COUNT(a.`id`)>=0,'Y','N') FROM t" is
transformed to "SELECT COUNT(a.`id`), IF(ref >= 0, 'Y', 'N') FROM t",
where ref is Item_ref to "COUNT(a.`id`)", by split_sum_func().

Spider walks the item list twice, invoking spider_db_print_item_type().
The first invocation is in spider_create_group_by_handler() with
str == NULL. The second one is in spider_group_by_handler::init_scan()
with str != NULL.

spider_db_print_item_type() prints nothing at the first invocation,
and it prints item at the second invocation. However, at the second
invocation, the above mentioned ref to "COUNT(a.`id`)" points to
a field in a temporary table where the result will be stored. Thus,
to look behind the item_ref, Spider need to generate the query earlier.

A possible fix would be to generate a query to send in
spider_create_group_by_handler(). However, the fix requires a
considerable amount of changes of the Spider's GROUP BY handler.
I'd like to avoid that.

So, I fix the problem by not to use the GROUP BY handler when a
query contains Item_ref whose table_name, name, and alias_name_used
are not set.

Currenly SST script for mariabackup stops on any failure while archiving
logs, e.g. when unable to create directory, insufficient permissions, gzip
failure, etc. However, in case of such problems, the script should issue
a warning and continue without archiving, but not exit with a fatal error.

This commit adds this fix to the SST script for mariabackup.

This failure was caused by MDEV-25975, which removed the parameter
innodb_disallow_writes.

Added a check for wsrep_sst_disable_writes to the function
ibuf_merge_in_background().

We will remove the parameter innodb_disallow_writes because it is badly
designed and implemented. The parameter was never allowed at startup.
It was only internally used by Galera snapshot transfer.
If a user executed
SET GLOBAL innodb_disallow_writes=ON;
the server could hang even on subsequent read operations.

During Galera snapshot transfer, we will block writes
to implement an rsync friendly snapshot, as follows:

sst_flush_tables() will acquire a global lock by executing
FLUSH TABLES WITH READ LOCK, which will block any writes
at the high level.

sst_disable_innodb_writes(), invoked via ha_disable_internal_writes(true),
will suspend or disable InnoDB background tasks or threads that could
initiate writes. As part of this, log_make_checkpoint() will be invoked
to ensure that anything in the InnoDB buf_pool.flush_list will be written
to the data files. This has the nice side effect that the Galera joiner
will avoid crash recovery.

The changes to sql/wsrep.cc and to the tests are based on a prototype
that was developed by Jan Lindström.

Reviewed by: Jan Lindström

after moving fields in optimize_schema_tables_memory_usage()
store default values into their new, moved, locations.

This reverts commit 0812d0de.
But keeps the test case.

followup for 58cd2a8d

This commit contains a fix to use modern syntax for selecting
character classes in the tr utility options.

Also one of the tests for SST via rsync (galera_sst_rysnc2) is made
more reliable (to avoid rare failures during automatic testing).

The "const" qualifier was obviously forgotten.

This change will also simpily fixing of MDEV-27744.

Fixing a typo in the fix for MDEV-19804, wrong return value in a bool function:
 < return NULL;
 > return true;

The problem was found because it did not compile on some platforms.

Strangley, it did not have visible problems on other platforms,
which did not fail to compile, although "return NULL" should compile to
"return false" rather than "return true".

tv_usec is a (suseconds_t) so we cast to it. Prevents the AIX(gcc-10) warning:

include/my_time.h: In function 'void my_timeval_trunc(timeval*, uint)':
include/my_time.h:249:65: warning: conversion from 'long int' to 'suseconds_t' {aka 'int'} may change value [-Wconversion]
  249 |   tv->tv_usec-= my_time_fraction_remainder(tv->tv_usec, decimals);
      |

macOS is: conversion from 'long int' to '__darwin_suseconds_t' {aka 'int'} may change value

On Windows suseconds_t isn't defined so we use the existing
long return type of my_time_fraction_remainder.

Reviewed by Marko Mäkelä

Closes: #2079

MDEV-28220: Assert failure in sp_head::~sp_head on parsing a syntax incorrect statement CREATE SEQUENCE ... RESTART inside CREATE PROCEDURE/CREATE FUNCTION

This bug report is about the same issue as MDEV-28129 and MDEV-21173.
The issue is that the macros YYABORT is called instead of MYSQL_YYABORT
on parse error. In result the method LEX::cleanup_lex_after_parse_error
is not called to clean up data structures created on parsing of
the statement.

We should make sure that wsrep exists before calling wsrep->post_rollback

MDEV-27343 Useless warning "InnoDB: Allocated tablespace ID <id> for <tablename>, old maximum was 0" during backup stage

mariabackup does not load dictionary during backup, but it loads
tablespaces, that is why fil_system.max_assigned_id is not set with
dict_check_tablespaces_and_store_max_id(). There is no sense to issue the
warning during backup.

MDEV-19631: Assertion `0' failed in st_select_lex_unit::optimize or different plan upon 2nd execution of PS with EXPLAIN

Second execution of a prepared statement for a query containing a constant
subquery with union that can be optimized away, could result in server abnormal
termination for debug build or incorrect result set output for release build.

For example, the following test case crashes a server built with debug on second
run of the statement EXECUTE stmt
  CREATE TABLE t1 (a INT);
  PREPARE stmt FROM 'EXPLAIN SELECT * FROM t1 HAVING 6 IN ( SELECT 6 UNION SELECT 5 )';
  EXECUTE stmt;
  EXECUTE stmt;

The reason for incorrect result set output or abnormal server termination
is careless working with the data member fake_select_lex->options inside
the function mysql_explain_union(). Once the flag SELECT_DESCRIBE is set in
the data member fake_select_lex->option before calling the methods
  SELECT_LEX_UNIT::prepare/SELECT_LEX_UNIT::execute
the original value of the option is no longer restored.
As a consequence, next time the prepared statement is re-executed we have
the fake_select_lex with the flag SELECT_DESCRIBE set in the data member
fake_select_lex->option, that is incorrect. In result, the method
  Item_subselect::assigned()
is not invoked during evaluation of a constant condition (constant subquery
with union) that being performed on OPTIMIZE phase of query handling.

This leads to the fact that records in the temporary table are not deleted
before calling
  table->file->ha_enable_indexes(HA_KEY_SWITCH_ALL)
in the method st_select_lex_unit::optimize().
In result table->file->ha_enable_indexes(HA_KEY_SWITCH_ALL) returns error
and DBUG_ASSERT(0) is fired.

Stack trace to the line where the error generated on re-enabling indexes
for next subselect iteration is below:
st_select_lex_unit::optimize (at sql_union.cc:954)
  handler::ha_enable_indexes (at handler.cc:4338)
    ha_heap::enable_indexes (at ha_heap.cc:519)
      heap_enable_indexes (at hp_clear.c:164)

The code snippet to clarify raising the error is also listed:
int heap_enable_indexes(HP_INFO *info)
{
  int error= 0;
  HP_SHARE *share= info->s;

  if (share->data_length || share->index_length)
    error= HA_ERR_CRASHED; <<== set error the value HA_ERR_CRASHED
                                since share->data_length != 0

To fix this issue the original value of unit->fake_select_lex->options
has to be saved before setting the flag SELECT_DESCRIBE and restored
on return from invocation of SELECT_LEX_UNIT::prepare/SELECT_LEX_UNIT::execute

As main() invokes parse_page() when -S or -D are set, it can be a case
when parse_page() is invoked when -D filename is not set, that is why
any attempt to write to page dump file must be done only if the file
name is set with -D.

The bug is caused by 2ef7a5a1
(MDEV-13443).

records_are_comparable() requires this condition:

  bitmap_is_subset(table->write_set, table->read_set)

On first iteration vers_update_fields() changes write_set and
read_set. On second iteration the above condition fails.

Added missing read bit for ROW_START. Also reorganized
bitmap_set_bit() so it is called only when needed.

Throw ER_NOT_FORM_FILE if this is wrong FRM data (warning with
ER_VERS_FIELD_WRONG_TYPE is still printed for deeper knowledge of what
was happened).

Keep ER_VERS_FIELD_WRONG_TYPE for creating partitioned table with
trx-versioning. Tested by MDEV-15951 in trx_id.test

On affected machine, the error happens sporadically in
innodb.instant_alter_limit.

Procmon shows SetRenameInformationFile failing with ERROR_ACCESS_DENIED.
In this case, the destination file was previously opened rsp oplocked by
Windows defender antivirus.

The fix is to retry MoveFileEx on ERROR_ACCESS_DENIED.

In commit 437da7bc (MDEV-19534),
the default value of the global variable srv_checksum_algorithm
in innochecksum was changed from SRV_CHECKSUM_ALGORITHM_INNODB
to implied 0 (innodb_checksum_algorithm=crc32). As a result,
the function buf_page_is_corrupted() would by default invoke
buf_calc_page_crc32() in innochecksum, and crc32_inited would hold.

This would cause "innochecksum" to fail on a particular page.

The actual problem is older, introduced in 2011 in
mysql/mysql-server@17e497bdb793bc6b8360aa1c626dcd8bb5cfad1b
(MySQL 5.6.3). It should affect the validation of pages of old
data files that were written with innodb_checksum_algorithm=innodb.
When using innodb_checksum_algorithm=crc32 (the default setting
since MariaDB Server 10.2), some valid pages would be rejected
only because exactly one of the two checksum fields accidentally
matches the innodb_checksum_algorithm=crc32 value.

buf_page_is_corrupted(): Simplify the logic of non-strict
checksum validation, by always invoking buf_calc_page_crc32().
Remove a bogus condition that if only one of the checksum fields
contains the value returned by buf_calc_page_crc32(), the page
is corrupted.

On the aarch64 platform, MySQL 5.7.33 cannot install this version of the audit
plugin, but X86_64 can run well。

This bug affected queries with IN predicates that contain parameter markers
in the value list. Such queries are executed via prepared statements.
The problem appeared only if the number of elements in the value list
was greater than the set value of the system variable
in_predicate_conversion_threshold.

The patch unconditionally prohibits conversion of an IN predicate to the
equivalent IN predicand if the value list of the IN predicate contains
parameters markers.

Approved by Oleksandr Byelkin <sanja@mariadb.com>

from mysql.plugin table
Fix: Since mysql_upgrade runs commands from mysql_system_tables.fix,
added sql commands to check for semisync plugins in
INFORMATION_SCHEMA.PLUGINS and if they aren't there then delete them
from mysql.plugin.

Adding support for the fully qualified package procedure calls:

BEGIN
  CALL db.pkg.proc(args); -- SQL/PSM call style
  db.pkg.proc(args);      -- PL/SQL call style
END;

Problem: In regular replication, when master binlogged using statement format
slave might not have written an event to its binary log when the Query
event aimed at a temporary table.
Specifically this was observed with LOAD DATA INFILE.

This effect was possible because unlike master slave holds temporary
tables in its pool and the master side check of existence of a
temporary table at the format bin-logging decision did not apply.

Solution: replace THD::has_thd_temporary_tables() with
THD::has_temporary_tables which allows to identify temporary table
presence on either side.

--
Reviewed by Andrei Elkin.

This commit adds a mtr test for reproducing a test scenario where despite of
innodb_disallow_writes blocking, writes to file system can still happen.

The test launches a garbd node, which triggers one of the cluster node to switch to
SST donor state. In this state, all disk activity should be halted, and e.g.
innodb_disallow_writes has been set. The test records md5sum aggregate over mariadb
data directory when the node enters the donor state, and records another md5sum
when the node leaves the donor state. If there is no IO activity in data directory, these
hashes should be equal.

For this test, the Donor state processing, has beeen instrumented so that, SST donor thread can be
stopped when entering the donor state. The test uses this new dbug sync point,
to control when to record the md5sums.

New SST script was added: wsrep_sst_backup, and garbd uses backup method to lauch the donor
node to call this script, and to enter in donor state.

The backup script could be later extended as general purpose backup method for the cluster.

This commit fixes also one race condition happening in wsrep_sst_rsync, like this:
* wsrep_rsync_sst script requests for flush tables,
  and then waits in a loop until mariadbd has created file tables_flushed,
  as confirmation that FLUSH TABLES has completed
* mariadbd's SST donor thread, wakes for the flush table request and then performs FTWRL,
  and after this it creates the tables_flushed file
* note that SST script will now continue to startup rsync sending
* mariadbd's SST donor thread now calls for sst_disallow_writes(),
  so that innodb would setup disk IO blockage, however rsyncing may already be ongoing at this point

This race condition is fixed in this commit, by performing all disk IO blocking before
creating the tables_flushed file.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>

Also fixes MDEV-19328 sql_mode=ORACLE: Package function in VIEW

Problem:
========
When the mysql.gtid_slave_pos table uses the InnoDB engine, and
mysqld starts, it reads the table and begins a transaction. After
reading the value, it should end the transaction and release all
associated locks. The bug reported in DBAAS-7828 shows that when
autocommit is off, the locks are not released, resulting in
indefinite hangs on future attempts to change gtid_slave_pos. In
particular, the transaction was not properly finalized because
thd->server_status was not updated to reflect the end of the
transaction.

Solution:
========
This patch updates the code to properly commit the transaction after
reading gtid_slave_pos during mysqld start-up.

Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>

Problem:
========
When using mariadb-binlog with --raw and --stop-never, events from
the master's currently active log file should be written to their
respective log file specified by --result-file, and shown on-disk.
There is a bug where mariadb-binlog does not flush the result file
to disk when new events are received

Solution:
========
Add a function call to flush mariadb-binlog’s result file after
receiving an event in --raw mode.

Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>

Problem:
========
When both semi-sync and slave compression are enabled, the numbering
on packet headers can become out of sync between the primary and
replica servers. More specifically, after the master flushes its
write, it should increment the counters that track packets. The
bug is such that the master only updates the normal packet counter
and leaves the compressed packet counter alone.

Solution:
========
After the master flushes, additionally increment the compressed
packet counter.

Reviewed By:
============
Andrei Elkin: <andrei.elkin@mariadb.com>

This bug could affect prepared statements for the command CREATE VIEW with
specification that contained unnamed basic constant in select list. If
generation of a valid name for the corresponding view column required
resolution of conflicts with names of other columns that were explicitly
defined then execution of such prepared statement and following deallocation
of this statement led to reading from freed memory.

Approved by Oleksandr Byelkin <sanja@mariadb.com>