Arg_comparator uses Item_cache objects to store constants being compared when
they're need a type conversion. Because this cache wasn't initialized properly
Arg_comparator might produce wrong comparison result.

The Arg_comparator::cache_converted_constant function now initializes cache
prior to usage.

Removed rpl_cross_version from experimental list.

{PROCEDURE|FUNCTION} FROM ...'

The master would hit an assertion when binary log was
active. This was due to the fact that the thread's diagnostics
area was being cleared before writing to the binlog,
independently of mysql_routine_grant returning an error or
not. When mysql_routine_grant was to return an error, the return
value and the diagnostics area contents would
mismatch. Consequently, neither my_ok would be called nor an
error would be signaled in the diagnostics area, eventually
triggering the assertion in net_end_statement.

We fix this by not clearing the diagnostics area at binlogging
time. 

solaris after a crash
      
This patch adds a Solaris-specific version of
print_stacktrace() which uses printstack(2), available on all
Solaris versions since Solaris 9. (While Solaris 11 adds
support for the glibc functions backtrace_*() as of
PSARC/2007/162, printstack() is used for consistency over all
Solaris versions.)

The symbol names are mangled, so use of c++filt may be
required as described in the MySQL documentation.

The problem was that the multiple evaluations of a ENCODE or
DECODE function within a single statement caused the random
generator to be reinitialized at each evaluation, even though
the parameters were constants.

The solution is to initialize the random generator only once
if the password (seed) parameter is constant.

This patch borrows code and ideas from Georgi Kodinov's patch.

Post-merge fix: Redirect stderr to a file as to avoid buffering
problems due to redirecting stderr to stdout.

This patch fixes three bugs as follows. First, aborting the server while purging
binary logs might generate orphan files due to how the purge operation was
implemented:

          (purge routine - sql/log.cc - MYSQL_BIN_LOG::purge_logs)

      1 - register the files to be removed in a temporary buffer.
      2 - update the log-bin.index.
      3 - flush the log-bin.index.
      4 - erase the files whose names where register in the temporary buffer
      in step 1.

Thus a failure while  executing step 4 would generate an orphan file. Second,
a similar issue might happen while creating a new binary as follows:

          (create routine - sql/log.cc - MYSQL_BIN_LOG::open)

      1 - open the new log-bin.
      2 - update the log-bin.index.

Thus a failure while executing step 1 would generate an orphan file.

To fix these issues, we record the files to be purged or created before really
removing or adding them. So if a failure happens such records can be used to
automatically remove dangling files. The new steps might be outlined as follows:

          (purge routine - sql/log.cc - MYSQL_BIN_LOG::purge_logs)

      1 - register the files to be removed in the log-bin.~rec~ placed in
      the data directory.
      2 - update the log-bin.index.
      3 - flush the log-bin.index.
      4 - delete the log-bin.~rec~.

          (create routine - sql/log.cc - MYSQL_BIN_LOG::open)

      1 - register the file to be created in the log-bin.~rec~
      placed in the data directory.
      2 - open the new log-bin.
      3 - update the log-bin.index.
      4 - delete the log-bin.~rec~.

          (recovery routine - sql/log.cc - MYSQL_BIN_LOG::open_index_file)

      1 - open the log-bin.index.
      2 - open the log-bin.~rec~.
      3 - for each file in log-bin.~rec~.
        3.1 Check if the file is in the log-bin.index and if so ignore it.
        3.2 Otherwise, delete it.

The third issue can be described as follows. The purge operation was allowing
to remove a file in use thus leading to the loss of data and possible
inconsistencies between the master and slave. Roughly, the routine was only
taking into account the dump threads and so if a slave was not connect the
file might be delete even though it was in use.

After-push minor code cleanup for WL 2360: unnecessary external
reference to LOCK_thread_count has been removed from ha_innodb.cc.

"mysql_upgrade (ver 5.1) add 3 fields to mysql.proc table but does
not set values".
            
mysql_upgrade (ver 5.1) adds 3 fields (character_set_client, 
collation_connection and db_collation) to the mysql.proc table, but 
does not set any values. When we run stored procedures, which were 
created with mysql 5.0, a warning is logged into the error log.
            
The solution to this is for mysql_upgrade to set default best guess
values for these fields. A warning is also written during upgrade, to
make the user aware that default values are set.

Test case cleanup.

When checking for an error after removing the special view error handler the code
was not taking into account that open_tables() may fail because of the current
statement being killed. 
Added a check for thd->killed.
Added a client program to test it.

Problem: Item_char_typecast reported wrong max_length when
casting to BINARY, which lead, in particular, in wrong
"ORDER BY BINARY(char_column)" results.

Fix: making Item_char_typecast report correct max_length.

  @ mysql-test/r/ctype_utf16.result
    Fixing old incorrect test result.
  @ mysql-test/r/ctype_utf32.result
    Fixing old incorrect test result.
  @ mysql-test/r/ctype_utf8.result
    Adding new test
  @ mysql-test/t/ctype_utf8.test
    Adding new test
  @ sql/item_timefunc.cc
    Making Item_char_typecast report correct max_length
    when cast is done to BINARY.

Problem: SHOW CREATE FUNCTION and SELECT DTD_IDENTIFIER FROM I_S.ROUTINES
returned wrong values in case of ENUM return data type and UCS2
character set.

Fix: the string to collect returned data type was incorrectly set to
"binary" character set, therefore UCS2 values where returned with
extra '\0' characters.
Setting string character set to creation_ctx->get_client_cs()
in sp_find_routine(), and to system_charset_info in sp_create_routine
fixes the problem.

Adding tests:
- the original test with Latin letters
- an extra test with non-Latin letters

Actually there is two different bugs.
The first one caused crash on queries with WHERE condition over views
containing WHERE condition. A wrong check for prepared statement phase led
to items for view fields being allocated in the execution memory and freed
at the end of execution. Thus the optimized WHERE condition refers to
unallocated memory on the second execution and server crashed.
The second one caused by the Item_cond::compile function not saving changes
it made to the item tree. Thus on the next execution changes weren't
reverted and server crashed on dereferencing of unallocated space.

The new helper function called is_stmt_prepare_or_first_stmt_execute
is added to the Query_arena class.
The find_field_in_view function now uses
is_stmt_prepare_or_first_stmt_execute() to check whether
newly created view items should be freed at the end of the query execution.
The Item_cond::compile function now saves changes it makes to item tree.

the last IF ELSE part which decides the plugin name is not relevant as we still have
to substitute the occurences of INNOBASE with INNODB_PLUGIN.
Remove the last IF ELSE part in CMakeLists.txt as it doesn't make sense in 5.1.

manual merge 5.0-->5.1, updating InnoDB plugin.

The bug 38816 changed the lock that protects THD::query from
LOCK_thread_count to LOCK_thd_data, but didn't update the associated
InnoDB functions.

1. The innobase_mysql_prepare_print_arbitrary_thd and the
innobase_mysql_end_print_arbitrary_thd InnoDB functions have been
removed, since now we have a per-thread mutex: now we don't need to wrap
several inter-thread access tries to THD::query with a single global
LOCK_thread_count lock, so we can simplify the code.

2. The innobase_mysql_print_thd function has been modified to lock
LOCK_thd_data in direct way.

and rpl.rpl_get_master_version_and_clock.

applied revisions: r6201, r6202, r6207, r6208, r6210

r6202 - port fix for BUG#48469 to plugin

Detailed revision comments:

r6201 | marko | 2009-11-19 14:09:11 +0200 (Thu, 19 Nov 2009) | 2 lines
branches/zip: ha_innobase::add_index(): Clarify the comment
on orphaned tables when creating a primary key.
r6202 | jyang | 2009-11-19 15:01:00 +0200 (Thu, 19 Nov 2009) | 8 lines
branches/zip: Function fseg_free() is no longer defined
in branches/zip. To port fix for bug #48469 to zip,
we can use btr_free_root() which frees the page,
and also does not require mini-transaction.

Approved by Marko.


r6207 | vasil | 2009-11-20 10:19:14 +0200 (Fri, 20 Nov 2009) | 54 lines
branches/zip: Merge r6198:6206 from branches/5.1:

(r6203 was skipped as it is already in branches/zip)

  ------------------------------------------------------------------------
  r6200 | vasil | 2009-11-19 12:14:23 +0200 (Thu, 19 Nov 2009) | 4 lines
  Changed paths:
     M /branches/5.1/btr/btr0btr.c
  
  branches/5.1:
  
  White space fixup - indent under the opening (
  
  ------------------------------------------------------------------------
  r6203 | jyang | 2009-11-19 15:12:22 +0200 (Thu, 19 Nov 2009) | 8 lines
  Changed paths:
     M /branches/5.1/btr/btr0btr.c
  
  branches/5.1: Use btr_free_root() instead of fseg_free() for
  the fix of bug #48469, because fseg_free() is not defined
  in the zip branch. And we could save one mini-trasaction started
  by fseg_free().
  
  Approved by Marko.
  
  
  ------------------------------------------------------------------------
  r6205 | jyang | 2009-11-20 07:55:48 +0200 (Fri, 20 Nov 2009) | 11 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
  
  branches/5.1: Add a special case to handle the Duplicated Key error
  and return DB_ERROR instead. This is to avoid a possible SIGSEGV
  by mysql error handling re-entering the storage layer for dup key
  info without proper table handle.
  This is to prevent a server crash when error situation in bug
  #45961 "DDL on partitioned innodb tables leaves data dictionary
  in an inconsistent state" happens.
  
  rb://157 approved by Sunny Bains.
  
  
  ------------------------------------------------------------------------
  r6206 | jyang | 2009-11-20 09:38:43 +0200 (Fri, 20 Nov 2009) | 5 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
  
  branches/5.1: Fix a minor code formating issue for 
  the parenthesis iplacement of the if condition in
  rename_table().
  
  
  ------------------------------------------------------------------------

r6208 | vasil | 2009-11-20 10:49:24 +0200 (Fri, 20 Nov 2009) | 4 lines
branches/zip:

Add ChangeLog entry for c6207.

r6210 | vasil | 2009-11-20 23:39:48 +0200 (Fri, 20 Nov 2009) | 3 lines
branches/zip:

Whitespace fixup.

applied revisions: r6197, r6198, r6199
r6197 - BUG#48317
r6199 - BUG#48526

Detailed revision comments:

r6197 | calvin | 2009-11-19 09:32:55 +0200 (Thu, 19 Nov 2009) | 6 lines
branches/zip: merge the fix of bug#48317 (CMake file)

Due to MySQL changes to the CMake, it is no longer able
to build InnoDB plugin as a static library on Windows.
The fix is proposed by Vlad of MySQL.

r6198 | vasil | 2009-11-19 09:44:31 +0200 (Thu, 19 Nov 2009) | 4 lines
branches/zip:

Add ChangeLog entry for r6197.

r6199 | vasil | 2009-11-19 12:10:12 +0200 (Thu, 19 Nov 2009) | 31 lines
branches/zip: Merge r6159:6198 from branches/5.1:

  ------------------------------------------------------------------------
  r6187 | jyang | 2009-11-18 05:27:30 +0200 (Wed, 18 Nov 2009) | 9 lines
  Changed paths:
     M /branches/5.1/btr/btr0btr.c
  
  branches/5.1: Fix bug #48469 "when innodb tablespace is
  configured too small, crash and corruption!". Function
  btr_create() did not check the return status of fseg_create(),
  and continue the index creation even there is no sufficient
  space.
  
  rb://205 Approved by Marko
  
  
  ------------------------------------------------------------------------
  r6188 | jyang | 2009-11-18 07:14:23 +0200 (Wed, 18 Nov 2009) | 8 lines
  Changed paths:
     M /branches/5.1/data/data0type.c
  
  branches/5.1: Fix bug #48526 "Data type for float and
  double is incorrectly reported in InnoDB table monitor".
  Certain datatypes are not printed correctly in
  dtype_print().
  
  rb://204 Approved by Marko.
  
  
  ------------------------------------------------------------------------

applied revisions: r6185, r6186, r6189, r6194

r6185 - only code changes incorporated, changesets which change
        innodb tests in the main mysql suite are discarded

r61889 - Fixes BUG#48782

Detailed revision comments:

r6185 | marko | 2009-11-17 16:44:20 +0200 (Tue, 17 Nov 2009) | 16 lines
branches/zip: Report duplicate table names
to the client connection, not to the error log.  This change will allow
innodb-index.test to be re-enabled.  It was previously disabled, because
mysql-test-run does not like output in the error log.

row_create_table_for_mysql(): Do not output anything to the error log
when reporting DB_DUPLICATE_KEY.  Let the caller report the error.
Add a TODO comment that the dict_table_t object is apparently not freed
when an error occurs.

create_table_def(): Convert InnoDB table names to the character set
of the client connection for reporting.  Use my_error(ER_WRONG_COLUMN_NAME)
for reporting reserved column names.  Report my_error(ER_TABLE_EXISTS_ERROR)
when row_create_table_for_mysql() returns DB_DUPLICATE_KEY.

rb://206
r6186 | vasil | 2009-11-17 16:48:14 +0200 (Tue, 17 Nov 2009) | 4 lines
branches/zip:

Add ChangeLog entry for r6185.

r6189 | marko | 2009-11-18 11:36:18 +0200 (Wed, 18 Nov 2009) | 5 lines
branches/zip: ha_innobase::add_index(): When creating the primary key
and the table is being locked by another transaction,
do not attempt to drop the table. (Bug #48782)

Approved by Sunny Bains over IM
r6194 | vasil | 2009-11-19 09:24:45 +0200 (Thu, 19 Nov 2009) | 5 lines
branches/zip:

Increment version number from 1.0.5 to 1.0.6 since 1.0.5 was just released
by MySQL and we will soon release 1.0.6.

Fixes several test cases.

applied revisions: r6181, r6182, r6183, r6184

r6183 - changes are made only to tests in innodb suite which is only 
        innodb-consistent-master.opt

Detailed revision comments:

r6181 | vasil | 2009-11-17 12:21:41 +0200 (Tue, 17 Nov 2009) | 33 lines
branches/zip:

At the end of innodb-index.test: restore the environment as it was before
the test was started to silence this warning:

  MTR's internal check of the test case 'main.innodb-index' failed.
  This means that the test case does not preserve the state that existed
  before the test case was executed.  Most likely the test case did not
  do a proper clean-up.
  This is the diff of the states of the servers before and after the
  test case was executed:
  mysqltest: Logging to '/tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.log'.
  mysqltest: Results saved in '/tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result'.
  mysqltest: Connecting to server localhost:13000 (socket /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/mysqld.1.sock) as 'root', connection 'default', attempt 0 ...
  mysqltest: ... Connected.
  mysqltest: Start processing test commands from './include/check-testcase.test' ...
  mysqltest: ... Done processing test commands.
  --- /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result	2009-11-17 13:10:40.000000000 +0300
  +++ /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.reject	2009-11-17 13:10:54.000000000 +0300
  @@ -84,7 +84,7 @@
   INNODB_DOUBLEWRITE	ON
   INNODB_FAST_SHUTDOWN	1
   INNODB_FILE_FORMAT	Antelope
  -INNODB_FILE_FORMAT_CHECK	Antelope
  +INNODB_FILE_FORMAT_CHECK	Barracuda
   INNODB_FILE_PER_TABLE	OFF
   INNODB_FLUSH_LOG_AT_TRX_COMMIT	1
   INNODB_FLUSH_METHOD	
  
  mysqltest: Result content mismatch
  
  not ok

r6182 | marko | 2009-11-17 13:49:15 +0200 (Tue, 17 Nov 2009) | 1 line
branches/zip: Set svn:eol-style on mysql-test files.
r6183 | marko | 2009-11-17 13:51:16 +0200 (Tue, 17 Nov 2009) | 1 line
branches/zip: Prepend loose_ to plugin-only mysql-test options.
r6184 | marko | 2009-11-17 13:52:01 +0200 (Tue, 17 Nov 2009) | 1 line
branches/zip: innodb-index.test: Restore innodb_file_format_check.

1. add testcase for BUG#46676
2. Allow CREATE INDEX to be interrupted
3. ha_innobase::change_active_index(): When the history is
   missing, report it to the client, not to the error log
4. ChangeLog entries

appplied revisions:r6169, r6170, r6175, r6177, r6179

Detailed revision comments:

r6169 | calvin | 2009-11-12 14:40:43 +0200 (Thu, 12 Nov 2009) | 6 lines
branches/zip: add test case for bug#46676

This crash is reproducible with InnoDB plugin 1.0.4 + MySQL 5.1.37.
But no longer reproducible after MySQL 5.1.38 (with plugin 1.0.5).
Add test case to catch future regression.

r6170 | marko | 2009-11-12 15:49:08 +0200 (Thu, 12 Nov 2009) | 4 lines
branches/zip: Allow CREATE INDEX to be interrupted.  (Issue #354)

rb://183 approved by Heikki Tuuri

r6175 | vasil | 2009-11-16 20:07:39 +0200 (Mon, 16 Nov 2009) | 4 lines
branches/zip:

Wrap line at 78th char in the ChangeLog

r6177 | calvin | 2009-11-16 20:20:38 +0200 (Mon, 16 Nov 2009) | 2 lines
branches/zip: add an entry to ChangeLog for r6065

r6179 | marko | 2009-11-17 10:19:34 +0200 (Tue, 17 Nov 2009) | 2 lines
branches/zip: ha_innobase::change_active_index(): When the history is
missing, report it to the client, not to the error log.

applied revisions: r6161, r6162, r6163

Detailed revision comments:

r6161 | vasil | 2009-11-11 15:36:16 +0200 (Wed, 11 Nov 2009) | 4 lines
branches/zip:

Add changelog entry for r6160.

r6162 | vasil | 2009-11-11 16:00:12 +0200 (Wed, 11 Nov 2009) | 4 lines
branches/zip:

Add ChangeLog for r6157.

r6163 | calvin | 2009-11-11 17:53:20 +0200 (Wed, 11 Nov 2009) | 8 lines
branches/zip: Exclude thd_binlog_filter_ok() when building
with older version of MySQL.

thd_binlog_filter_ok() is introduced in MySQL 5.1.41. But the
plugin can be built with MySQL prior to 5.1.41.

Approved by Heikki (on IM).

applied revisions: r6160

Detailed revision comments:

r6160 | vasil | 2009-11-11 15:33:49 +0200 (Wed, 11 Nov 2009) | 72 lines
branches/zip: Merge r6152:6159 from branches/5.1:

(r6158 was skipped as an equivallent change has already been merged from MySQL)

  ------------------------------------------------------------------------
  r6154 | calvin | 2009-11-11 02:51:17 +0200 (Wed, 11 Nov 2009) | 17 lines
  Changed paths:
     M /branches/5.1/include/os0file.h
     M /branches/5.1/os/os0file.c
  
  branches/5.1: fix bug#3139: Mysql crashes: 'windows error 995'
  after several selects on a large DB
  
  During stress environment, Windows AIO may fail with error code
  ERROR_OPERATION_ABORTED. InnoDB does not handle the error, rather
  crashes. The cause of the error is unknown, but likely due to
  faulty hardware or driver.
  
  This patch introduces a new error code OS_FILE_OPERATION_ABORTED,
  which maps to Windows ERROR_OPERATION_ABORTED (995). When the error
  is detected during AIO, the InnoDB will issue a synchronous retry
  (read/write).
  
  This patch has been extensively tested by MySQL support.
  
  Approved by: Marko
  rb://196
  ------------------------------------------------------------------------
  r6158 | vasil | 2009-11-11 14:52:14 +0200 (Wed, 11 Nov 2009) | 37 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
     M /branches/5.1/handler/ha_innodb.h
  
  branches/5.1:
  
  Merge a change from MySQL:
  (this has been reviewed by Calvin and Marko, and Calvin says Luis has
  incorporated Marko's suggestions)
  
    ------------------------------------------------------------
    revno: 3092.5.1
    committer: Luis Soares <luis.soares@sun.com>
    branch nick: mysql-5.1-bugteam
    timestamp: Thu 2009-09-24 15:52:52 +0100
    message:
      BUG#42829: binlogging enabled for all schemas regardless of
      binlog-db-db / binlog-ignore-db
            
      InnoDB will return an error if statement based replication is used
      along with transaction isolation level READ-COMMITTED (or weaker),
      even if the statement in question is filtered out according to the
      binlog-do-db rules set. In this case, an error should not be printed.
            
      This patch addresses this issue by extending the existing check in
      external_lock to take into account the filter rules before deciding to
      print an error. Furthermore, it also changes decide_logging_format to
      take into consideration whether the statement is filtered out from 
      binlog before decision is made.
    added:
      mysql-test/suite/binlog/r/binlog_stm_do_db.result
      mysql-test/suite/binlog/t/binlog_stm_do_db-master.opt
      mysql-test/suite/binlog/t/binlog_stm_do_db.test
    modified:
      sql/sql_base.cc
      sql/sql_class.cc
      storage/innobase/handler/ha_innodb.cc
      storage/innobase/handler/ha_innodb.h
      storage/innodb_plugin/handler/ha_innodb.cc
      storage/innodb_plugin/handler/ha_innodb.h
  
  ------------------------------------------------------------------------

applied revisions: r6157

Detailed revision comments:

r6157 | jyang | 2009-11-11 14:27:09 +0200 (Wed, 11 Nov 2009) | 10 lines
branches/zip: Fix an issue that a local variable defined
in innodb_file_format_check_validate() is being referenced
across function in innodb_file_format_check_update().
In addition, fix "set global innodb_file_format_check =
DEFAULT" call.
Bug #47167: "set global innodb_file_format_check" cannot
set value by User-Defined Variable."
rb://169 approved by Sunny Bains and Marko.

Enable partition_innodb_plugin.test for BUG#32430
applied revisions: r6134, r6137, r6153

Detailed revision comments:

r6134 | marko | 2009-11-04 09:57:29 +0200 (Wed, 04 Nov 2009) | 5 lines
branches/zip: innobase_convert_identifier(): Convert table names with
explain_filename() to address Bug #32430: 'show innodb status'
causes errors Invalid (old?) table or database name in logs.

rb://134 approved by Sunny Bains
r6137 | marko | 2009-11-04 15:24:28 +0200 (Wed, 04 Nov 2009) | 1 line
branches/zip: dict_index_too_big_for_undo(): Correct a typo.
r6153 | vasil | 2009-11-10 15:33:22 +0200 (Tue, 10 Nov 2009) | 145 lines
branches/zip: Merge r6125:6152 from branches/5.1:

(everything except the last white-space change was skipped as it is already
in branches/zip)

  ------------------------------------------------------------------------
  r6127 | vasil | 2009-10-30 11:18:25 +0200 (Fri, 30 Oct 2009) | 18 lines
  Changed paths:
     M /branches/5.1/Makefile.am
     M /branches/5.1/mysql-test/innodb-autoinc.result
     M /branches/5.1/mysql-test/innodb-autoinc.test
  
  branches/5.1:
  
  Backport c6121 from branches/zip:
  
    ------------------------------------------------------------------------
    r6121 | sunny | 2009-10-30 01:42:11 +0200 (Fri, 30 Oct 2009) | 7 lines
    Changed paths:
       M /branches/zip/mysql-test/innodb-autoinc.result
    
    branches/zip: This test has been problematic for sometime now. The underlying
    bug is that the data dictionaries get out of sync. In the AUTOINC code we
    try and apply salve to the symptoms. In the past MySQL made some unrelated
    change and the dictionaries stopped getting out of sync and this test started
    to fail. Now, it seems they have reverted that changed and the test is
    passing again. I suspect this is not he last time that this test will change.
    
    ------------------------------------------------------------------------
  
  ------------------------------------------------------------------------
  r6129 | vasil | 2009-10-30 17:14:22 +0200 (Fri, 30 Oct 2009) | 4 lines
  Changed paths:
     M /branches/5.1/Makefile.am
  
  branches/5.1:
  
  Revert a change to Makefile.am that sneaked unnoticed in c6127.
  
  ------------------------------------------------------------------------
  r6136 | marko | 2009-11-04 12:28:10 +0200 (Wed, 04 Nov 2009) | 15 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
     M /branches/5.1/include/ha_prototypes.h
     M /branches/5.1/ut/ut0ut.c
  
  branches/5.1: Port r6134 from branches/zip:
  
    ------------------------------------------------------------------------
    r6134 | marko | 2009-11-04 07:57:29 +0000 (Wed, 04 Nov 2009) | 5 lines
  
    branches/zip: innobase_convert_identifier(): Convert table names with
    explain_filename() to address Bug #32430: 'show innodb status'
    causes errors Invalid (old?) table or database name in logs.
  
    rb://134 approved by Sunny Bains
    ------------------------------------------------------------------------
  
  innobase_print_identifier(): Replace with innobase_convert_name().
  
  innobase_convert_identifier(): New function, called by innobase_convert_name().
  ------------------------------------------------------------------------
  r6149 | vasil | 2009-11-09 11:15:01 +0200 (Mon, 09 Nov 2009) | 5 lines
  Changed paths:
     M /branches/5.1/CMakeLists.txt
  
  branches/5.1:
  
  Followup to r5700: Adjust the changes so they are the same as in the BZR
  repository.
  
  ------------------------------------------------------------------------
  r6150 | vasil | 2009-11-09 11:43:31 +0200 (Mon, 09 Nov 2009) | 58 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
  
  branches/5.1:
  
  Merge a part of r2911.5.5 from MySQL:
  (the other part of this was merged in c5700)
  
    ------------------------------------------------------------
    revno: 2911.5.5
    committer: Vladislav Vaintroub <vvaintroub@mysql.com>
    branch nick: 5.1-innodb_plugin
    timestamp: Wed 2009-06-10 10:59:49 +0200
    message:
      Backport WL#3653 to 5.1 to enable bundled innodb plugin.
      Remove custom DLL loader code from innodb plugin code, use 
      symbols exported from mysqld.
    removed:
      storage/innodb_plugin/handler/handler0vars.h
      storage/innodb_plugin/handler/win_delay_loader.cc
    added:
      storage/mysql_storage_engine.cmake
      win/create_def_file.js
    modified:
      CMakeLists.txt
      include/m_ctype.h
      include/my_global.h
      include/my_sys.h
      include/mysql/plugin.h
      libmysqld/CMakeLists.txt
      mysql-test/mysql-test-run.pl
      mysql-test/t/plugin.test
      mysql-test/t/plugin_load-master.opt
      mysys/charset.c
      sql/CMakeLists.txt
      sql/handler.h
      sql/mysql_priv.h
      sql/mysqld.cc
      sql/sql_class.cc
      sql/sql_class.h
      sql/sql_list.h
      sql/sql_profile.h
      storage/Makefile.am
      storage/archive/CMakeLists.txt
      storage/blackhole/CMakeLists.txt
      storage/csv/CMakeLists.txt
      storage/example/CMakeLists.txt
      storage/federated/CMakeLists.txt
      storage/heap/CMakeLists.txt
      storage/innobase/CMakeLists.txt
      storage/innobase/handler/ha_innodb.cc
      storage/innodb_plugin/CMakeLists.txt
      storage/innodb_plugin/handler/ha_innodb.cc
      storage/innodb_plugin/handler/handler0alter.cc
      storage/innodb_plugin/handler/i_s.cc
      storage/innodb_plugin/plug.in
      storage/myisam/CMakeLists.txt
      storage/myisammrg/CMakeLists.txt
      win/Makefile.am
      win/configure.js
  
  ------------------------------------------------------------------------
  r6152 | vasil | 2009-11-10 15:30:20 +0200 (Tue, 10 Nov 2009) | 4 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
  
  branches/5.1:
  
  White space fixup.
  
  ------------------------------------------------------------------------