into  mysql.com:/home/svoj/devel/mysql/BUG28248/mysql-5.0-engines

When there are no underlying tables specified for a merge table,
SHOW CREATE TABLE outputs a statement that cannot be executed. The
same is true for mysqldump (it generates dumps that cannot be
executed).

This happens because SQL parser does not accept empty UNION() clause.

This patch changes the following:
- it is now possible to execute CREATE/ALTER statement with
  empty UNION() clause.
- the same as above, but still worth noting: it is now possible to
  remove underlying tables mapping using ALTER TABLE ... UNION=().
- SHOW CREATE TABLE does not output UNION() clause if there are
  no underlying tables specified for a merge table. This makes
  mysqldump slightly smaller.


mysql-test/r/merge.result:
  A test case for BUG#28248.
mysql-test/t/merge.test:
  A test case for BUG#28248.
sql/ha_myisammrg.cc:
  Do not output UNION clause in SHOW CREATE TABLE, when there are
  no underlying tables defined.
sql/sql_yacc.yy:
  Make underlying table list for MERGE engine optional.
  
  As for MERGE engine empty underlying tables list is valid, it should
  be valid for the parser as well.
  
  This change is mostly needed to restore dumps made by earlier MySQL
  versions. Also with this fix it is possible to remove underlying
  tables mapping by using ALTER TABLE ... UNION=().

            log-slave-updates and circul repl

This is a test case fix for BUG#13861.


mysql-test/r/rpl_dual_pos_advance.result:
  Fix for a test case for BUG#13861.
mysql-test/t/rpl_dual_pos_advance.test:
  Fix for a test case for BUG#13861.
  
  master_pos_wait() requires slave sql thread running. But it is not
  guaranteed for this test case. As we use start slave until it may
  execute all events and shutdown before master_pos_wait() is started.
  
  On the other hand it is safe just to wait for slave to stop here,
  as start slave returns _after_ sql thread is started.

into  pcg5ppc.xiphis.org:/Network/Servers/anubis.xiphis.org/home/antony/work/merge.20080307/mysql-5.0


sql/item.cc:
  Auto merged
sql/item_func.cc:
  Auto merged

into  mysql.com:/home/svoj/devel/mysql/BUG13861/mysql-5.0-engines

into  mysql.com:/home/bar/mysql-work/mysql-5.0.b27580v2


mysql-test/r/ctype_ucs.result:
  Auto merged
mysql-test/t/ctype_ucs.test:
  Auto merged
mysql-test/include/ctype_common.inc:
  after merge fix
mysql-test/r/ctype_big5.result:
  after merge fix
mysql-test/r/ctype_euckr.result:
  after merge fix
mysql-test/r/ctype_gb2312.result:
  after merge fix
mysql-test/r/ctype_gbk.result:
  after merge fix
mysql-test/r/ctype_uca.result:
  after merge fix

Problem: libedit is a very pure-ASCII oriented library,
and it is not aware of extended (0x80..0xFF) or even multi-byte
characters. It considered such characters as non-printable
and didn't allow to input them.
Fix: make libedit think that all bytes >= 0x80 are printable.


cmd-line-utils/libedit/el.h:
  Defining macro, a locale's isprint() replacement.
  We'll consider all 8bit values as printable characters.
cmd-line-utils/libedit/key.c:
  Changing isprint() to el_isprint().
cmd-line-utils/libedit/map.c:
  Changing isprint() to el_isprint().
cmd-line-utils/libedit/read.c:
  Changing isprint() to el_isprint().
cmd-line-utils/libedit/refresh.c:
  Changing isprint() to el_isprint().

must match the order which they were declared in the class definition. 


sql/item.cc:
  Fix initialization order, parameter was the last one declared.

The problem is that passing anything other than a integer to a limit
clause in a prepared statement would fail. This limitation was introduced
to avoid replication problems (e.g: replicating the statement with a
string argument would cause a parse failure in the slave).

The solution is to convert arguments to the limit clause to a integer
value and use this converted value when persisting the query to the log.


mysql-test/r/limit.result:
  Update test case result.
mysql-test/r/ps.result:
  Add test case result for Bug#33851
mysql-test/r/rpl_user_variables.result:
  Test case result for replication of prepared statement with
  limit clause.
mysql-test/t/limit.test:
  Test parameters to limit clause.
mysql-test/t/ps.test:
  Add test case for Bug#33851
mysql-test/t/rpl_user_variables.test:
  Test replication of a parameter which value is converted.
sql/item.cc:
  Convert value to integer if it's a parameter to a limit clause.
sql/item.h:
  Flag signal that item is a parameter to a limit clause.
sql/item_func.cc:
  Const member functions, object is not mutated.
sql/sql_class.h:
  Const member functions, object is not mutated.
sql/sql_yacc.yy:
  Flag that item is a parameter to a limit clause.

Disable the test case.


tests/mysql_client_test.c:
  Disable test case.

into  mysql.com:/home/svoj/devel/mysql/BUG13861/mysql-5.0-engines

into  quad.:/mnt/raid/alik/MySQL/devel/5.0-rt-merged


mysql-test/r/view.result:
  Auto merged

into  mysql.com:/home/ram/work/b33304/b33304.5.0

into  ramayana.hindu.god:/home/tsmith/m/bk/build/50


scripts/mysqlhotcopy.sh:
  Auto merged

into  trift2.:/MySQL/M50/push-5.0


ndb/src/kernel/blocks/dbtux/DbtuxScan.cpp:
  Auto merged

            log-slave-updates and circul repl

Slave SQL thread may execute one extra event when there are events
skipped by slave I/O thread (e.g. originated by the same server).
Whereas it was requested not to do so by the UNTIL condition.

This happens because we compare with the end position of previously
executed event. This is fine when there are no skipped by slave I/O
thread events, as end position of previous event equals to start
position of to be executed event. Otherwise this position equals to
start position of skipped event.

This is fixed by:
- reading the event to be executed before checking if the until condition
  is satisfied.
- comparing the start position of the event to be executed. Since we do
  not have the start position available, we compute it by subtracting
  event length from end position (which is available).
- if there are no events on the event queue at the slave sql starting
  time, that meet until condition, we stop immediately, as in this
  case we do not want to wait for next event.


mysql-test/r/rpl_dual_pos_advance.result:
  A test case for BUG#13861.
mysql-test/t/rpl_dual_pos_advance.test:
  A test case for BUG#13861.
sql/log_event.cc:
  Store length of event. This is needed for further calculation of
  the beginning of event.
sql/slave.cc:
  Slave SQL thread may execute one extra event when there are events
  skipped by slave I/O thread (e.g. originated by the same server).
  Whereas it was requested not to do so by the UNTIL condition.
  
  This happens because we compare with the end position of previously
  executed event. This is fine when there are no skipped by slave I/O
  thread events, as end position of previous event equals to start
  position of to be executed event. Otherwise this position equals to
  start position of skipped event.
  
  This is fixed by:
  - reading the event to be executed before checking if the until condition
    is satisfied.
  - comparing the start position of the event to be executed. Since we do
    not have the start position available, we compute it by subtracting
    event length from end position (which is available).
  - if there are no events on the event queue at the slave sql starting
    time, that meet until condition, we stop immediately, as in this
    case we do not want to wait for next event.
sql/slave.h:
  Added master_log_pos parametr to is_until_satisfied().
mysql-test/t/rpl_dual_pos_advance-slave.opt:
  New BitKeeper file ``mysql-test/t/rpl_dual_pos_advance-slave.opt''

sql/sql_prepare.cc:
  Removed unused variable.

The problem is that CREATE VIEW statements inside prepared statements
weren't being expanded during the prepare phase, which leads to objects
not being allocated in the appropriate memory arenas.

The solution is to perform the validation of CREATE VIEW statements
during the prepare phase of a prepared statement. The validation
during the prepare phase assures that transformations of the parsed
tree will use the permanent arena of the prepared statement.


mysql-test/r/ps.result:
  Add test case result for Bug#32890
mysql-test/t/ps.test:
  Add test case for Bug#32890
sql/item.h:
  Restore original field name if name is auto generated.
sql/sql_prepare.cc:
  Validate and prepare a CREATE VIEW statement for execution.
sql/sql_view.cc:
  Move privileges check to it's own function.
sql/sql_view.h:
  Export function which check privileges of a CREATE VIEW statement.

into  pilot.mysql.com:/data/msvensson/mysql/mysql-5.0-build

 - fix test failures that was already there but now are
   more consistent when the 1 second sleep has been removed from
   ndb_waiter


mysql-test/t/ndb_autodiscover.test:
  Wait until mysqld has reconnected to ndbd after ndbd has been restarted
mysql-test/t/ndb_autodiscover3.test:
  Wait until mysqld has reconnected to ndbd after ndbd has been restarted
mysql-test/include/ndb_wait_connected.inc:
  Wait until mysqld has reconnected to ndbd after ndbd has been restarted

a table name.
  
The problem was that fill_defined_view_parts() did not return
an error if a table is going to be altered. That happened if
the table was already in the table cache. In that case,
open_table() returned non-NULL value (valid TABLE-instance from
the cache).
  
The fix is to ensure that an error is thrown even if the table
is in the cache.

(This is a backport of the original patch for 5.1)


mysql-test/r/view.result:
  Fix result file.
mysql-test/r/view_grant.result:
  Fix result file.
mysql-test/t/view.test:
  Add a test case for Bug#34337: Server crash when Altering a view
  using a table name.
mysql-test/t/view_grant.test:
  Fix order-dependency.
sql/sql_view.cc:
  Report an error if we're going to work with a table.

into  xiphis.org:/anubis/antony/work/merge.20080220/mysql-5.0

into  wva.:C:/bk/bug31745_2/mysql-5.0-build


sql/sql_parse.cc:
  Auto merged

by patch for bug 32265 .


tests/mysql_client_test.c:
  Removed unused variable.

Executing a prepared statement associated with a materialized
cursor yields to the client a metadata packet with wrong table
and database names. The problem was occurring because the server
was sending the the name of the temporary table used by the cursor
instead of the table name of the original table. The same problem
occurs when selecting from views, in which case the table name was
being sent and not the name of the view.
  
The solution is to fill the list item from the temporary table but
preserving the table and database names of the original fields. This
is achieved by tweaking the Select_materialize to accept a pointer to
the Materialized_cursor class which contains the item list to be filled.


sql/sql_cursor.cc:
  Fill the item list in the send_fields method and preserve
  the table and database name of the fields.
tests/mysql_client_test.c:
  Add test case for Bug#32265

            breaks replication

NAME_CONST() didn't replicate constant character set and collation
correctly.

With this fix NAME_CONST() inherits collation from the value argument.


mysql-test/r/func_misc.result:
  A test case for BUG#34289.
mysql-test/t/func_misc.test:
  A test case for BUG#34289.
sql/item.cc:
  Inherit collation from value argument.

- Replace per-thread signal()'s with  SetUnhandledExceptionFilter(). 
  The only remaining signal() is for SIGABRT (default abort()
  handler in VS2005 is broken, i.e removes user exception filter)
- remove MessageBox()'es  from error handling code
- Windows port for print_stacktrace() and write_core() 
- Cleanup, removed some unused functions


sql/CMakeLists.txt:
  Implement stack tracing on and generating crash dumps on Windows
sql/mysqld.cc:
  Correct signal handling on Windows. 
  - For console events, like CTRL-C use SetConsoleCtrlHandler
  - For exceptions like access violation, use SetUnhandledExceptionFilter
  - For SIGABRT generate exception via __debugbreak() intrinsic
    if built with VS2005 and later , since default SIGABRT handler 
    replaces unhandled exception filter specified by user
  - make provisions to debug exception filter, as it is not trivial 
  (should be compiled with /DDEBUG_UNHANDLED_EXCEPTION_FILTER)
sql/sql_parse.cc:
  Remove message box from windows signal handler.
  The only thread specific handler left is for SIGABRT,
  which is broken on VS2005 and later (user specified unhandled exception 
  filter gets overwritten)
sql/stacktrace.c:
  Stack tracing and generating crash dumps on Windows
sql/stacktrace.h:
  Implement print_stacktrace and write_core on Windows

into  ramayana.hindu.god:/home/tsmith/m/bk/build/50

into  ramayana.hindu.god:/home/tsmith/m/bk/build/50

Check for an existing MySQL server package from a different vendor or
major MySQL version.  In such a case, refuse to install the server and
recommend how to safely remove the old packages before installing the
new ones.


support-files/mysql.spec.sh:
  Add to the %pre server scriptlet checks to ensure that we're not
  upgrading from another vendor's package, or that this is not a
  major version upgrade.  If an automatic upgrade isn't safe, print
  basic instructions on how to do a manual upgrade, and bail out.

Remove code from mysqlhotcopy which deals with the so-called "RAID"
feature of older MyISAM.


scripts/mysqlhotcopy.sh:
  Remove code which tried to handle the so-called "RAID" files.
  
  The "RAID" feature has been dropped from MySQL builds, and this
  code caused mysqlhotcopy to skip (silently) over databases with
  two-character names (e.g., "ab").

into  stella.local:/home2/mydev/mysql-5.0-axmrg

Problem: SLEEP(0) never returns on 64-bit Mac OS X due to a bug in 
pthread_cond_timedwait().

Fix: when given a very short timeout just return immediately.


sql/item_func.cc:
  Fix for bug #33304: Test 'func_group' hangs on Mac OS X 10.4 PowerPC 64-bit
  
  - if given a very short timeout (< 10 mcs) just return from SLEEP().

into  stella.local:/home2/mydev/mysql-5.0-axmrg

into  stella.local:/home2/mydev/mysql-5.0-axmrg

into  stella.local:/home2/mydev/mysql-5.0-axmrg