- lifting a limit: INSERT|REPLACE SELECT and LOAD DATA always prevented versioning, now what do so is if
the table is empty.
- lifting another limit: versioning was disabled if table had more than one unique index
- correcting test of statement-based binlogging, when converting read locks to TL_READ_NO_INSERT

KNOWN_BUGS.txt:
  removing mostly fixed limitation (see ha_maria.cc)
mysql-test/r/maria-mvcc.result:
  result update
mysql-test/t/maria-mvcc.test:
  now when table is empty it does not do versioning, so test hung; inserting one row at start of the test,
  to enable versioning.
sql/sql_parse.cc:
  Maria team wrongly removed this "break", thanks Davi for noticing
storage/maria/ha_maria.cc:
  - We used to prevent versioning in INSERT/REPLACE SELECT and LOAD DATA, because the index rebuild done by
  bulk insert sometimes, is unsafe when versioning is on. Here we change that: in store_lock(), if the table is empty
  (which is required for index rebuild to be used), we disable versioning; in start_bulk_insert(), we don't do
  index rebuild if versioning is enabled.
  - Test for statement-based binlogging was incomplete: statement-based binlogging is on for this statement
  if binlog is open and statement has binlogging enabled and statement is not doing row-based binlogging
storage/maria/ma_open.c:
  Monty and I agreed that it's ok to have versioning on a table with more than one unique index: if an INSERT
  hits a duplicate key when inserting the second index' key, no other thread should be able to touch the 
  first index' just-inserted key, because that key has an uncommitted transaction id, so the first thread
  should have time to remove the first index' key.

- after auto-zerofill (ha_maria::check_and_repair()) kepts its state's LSNs unchanged, which could
be the same as the create_rename_lsn of another pre-existing table, which would break versioning as this LSN
serves as unique identifier in the versioning code (in maria_open()). Even the state pieces which
maria_zerofill() did change were lost (because they didn't go to disk).
- after this fix, if two tables were auto-zerofilled at the same time (by _ma_mark_changed())
they could receive the same create_rename_lsn, which would break versioning again. Fix is to write a log
record each time a table is imported.
- Print state's LSNs (create_rename_lsn, is_of_horizon, skip_redo_lsn) and UUID in maria_chk -dvv.

mysql-test/r/maria-autozerofill.result:
  result
mysql-test/t/maria-autozerofill.test:
  Test for auto-zerofilling
storage/maria/ha_maria.cc:
  The state changes done by auto-zerofilling never reached disk.
storage/maria/ma_check.c:
  When zerofilling a table, including its pages' LSNs, new state LSNs are needed next time the table
  is imported into a Maria instance.
storage/maria/ma_create.c:
  Write LOGREC_IMPORTED_TABLE when importing a table. This is informative and ensures
  that the table gets a unique create_rename_lsn even though multiple tables
  are imported by concurrent threads (it advances the log's end LSN).
storage/maria/ma_key_recover.c:
  comment
storage/maria/ma_locking.c:
  instead of using translog_get_horizon() for state's LSNs of imported table,
  use the LSN of to-be-written LOGREC_IMPORTED_TABLE.
storage/maria/ma_loghandler.c:
  New type of log record
storage/maria/ma_loghandler.h:
  New type of log record
storage/maria/ma_loghandler_lsn.h:
  New name for constant as can be used not only by maria_chk but auto-zerofill now too.
storage/maria/ma_open.c:
  instead of using translog_get_horizon() for state's LSNs of imported table,
  use the LSN of to-be-written LOGREC_IMPORTED_TABLE.
storage/maria/ma_recovery.c:
  print content of LOGREC_IMPORTED_TABLE in maria_read_log.
storage/maria/maria_chk.c:
  print info about LSNs of the table's state, and UUID, when maria_chk -dvv
storage/maria/maria_pack.c:
  new name for constant
storage/maria/unittest/ma_test_recovery.pl:
  Now that maria_chk -dvv shows state LSNs and UUID those need to be filtered out,
  as maria_read_log -a does not use the same as at original run.

Fixed several (but not all) issues found by the test program:
- ASSERT on row_length in ma_blockrec.c::_ma_compact_block_page()
- Fixed bug when splitting node pages
- Fixed hang in 'closeing tables' (conflicting mutex order) by ensuring we first take trnman lock and then share->intern_lock

storage/maria/ma_blockrec.c:
  When compacting a row page when allocating space for a new row, the min length of a the new block may be temporarly smaller than 'min_block_length'.
storage/maria/ma_check.c:
  More DBUG output
storage/maria/ma_checkpoint.c:
  Call new function _ma_remove_not_visible_states_with_lock() to ensure we first take lock on trnman and then on share->intern_lock
  +
storage/maria/ma_close.c:
  Added comment
storage/maria/ma_open.c:
  Added comment
storage/maria/ma_search.c:
  Copy also node data; Caused bug when splitting node pages
storage/maria/ma_state.c:
  Added _ma_remove_not_visible_states_with_lock() to ensure we take locks in right order
storage/maria/ma_state.h:
  Added new prototype
storage/maria/trnman.c:
  Added trnman_lock() and trnman_unlock().
  Needed by _ma_remove_not_visible_states_with_lock() to get mutex in right order
storage/maria/trnman_public.h:
  Added new prototypes

What varies accross machine is maria_pagecache_read_requests, but maria_pagecache_reads doesn't and
is the most interesting (helps verify that disk wasn't touched after preloading), that's all we keep.

mysql-test/r/maria-preload.result:
  unrepeatable variable removed
mysql-test/t/maria-preload.test:
  unrepeatable variable removed
storage/maria/ma_test_force_start.pl:
  portability fix for running under Windows

mysql-test/r/maria-preload.result:
  new result.
mysql-test/t/disabled.def:
  re-enabling test
mysql-test/t/maria-preload.test:
  Background dirty pages flushing may influence page cache stats

in the last days: substitution in tests has to work for absolute datadir (/dev/shm/...);
internal temp tables (like information_schema) can be Maria; Maria may not be compiled in; splitting
too long maria.test in two; mtr --embedded runs in mysql-test not mysql-test/var/master-data
so we need some absolute paths in tests; can't restart mysqld in --embedded; missing DBUG_VOID_RETURN in
mysqltest.c (fix from Serg); is_collation_character_set_applicability.test was too long name
which broke tar's 99-char limit.

mysql-test/r/maria-recovery.result:
  cutting test in two
mysql-test/r/maria-recovery2.result:
  cutting test in two
mysql-test/t/maria-recovery.test:
  cutting test in two
mysql-test/t/maria-recovery2-master.opt:
  cutting test in two
mysql-test/t/maria-recovery2.test:
  cutting test in two

Fix for BUG#37288 "Maria - zerofill corrupts table". Testcase is running ma_test_recovery.pl on Windows.

storage/maria/ma_blockrec.c:
  comment
storage/maria/ma_check.c:
  When zerofilling the data file, _ma_compact_block_page() may increase free space in a
  page so bitmap page needs to be corrected.

maria-preload will be re-enabled later because other pieces of it have possibly random output.

storage/maria/ma_check.c:
  Fix for BUG#35107 "maria-preload.test is disabled because causes assertion".

storage/maria/ma_test1.c:
  rec_length was too short by one byte: at line 299 memcpy(record,read_record,rec_length) thus didn't copy the
  last byte, so 'record' was not ok for use by update_record(), contained an incomplete blob address, sometimes
  crashed on Itanium.
storage/maria/unittest/ma_test_loghandler_multithread-t.c:
  Tests failed once, never before for hundreds of times, we don't know if test is correct, disabling.

The reason for this is that if we change one unique key and then get a failure on the second, we may not be able to rename the first one back before someone else writes the same key value.  In Maria 2.0, when we keep deleted key values in the tree, this will not be a problem anymore
Fixed typedisable concurrent insert/select for SQLCOM_LOAD as there are problems with concurrent threads during index recreation

KNOWN_BUGS.txt:
  More comments
storage/maria/ha_maria.cc:
  Fixed typo (REPLACE -> INSERT)
  Also disable concurrent insert/select for SQLCOM_LOAD as there are problems with concurrent threads during index recreation
storage/maria/ma_open.c:
  Disable versioning (concurrent writes) if more than one unique key

Added some minor changes that was done in my tree while waiting for test to run:
- Remove in Maria T_QUICK when retrying repair for enabling indexes, as the record file may be in use by other threads
- Disable code that is only relevant for EXTERNAL_LOCKING

include/m_string.h:
  Automatic merge
storage/maria/ha_maria.cc:
  Remove T_QUICK when retrying repair for enabling indexes, as the record file may be in use by other threads
storage/maria/ma_check.c:
  Automatic merge
storage/maria/ma_key.c:
  Automatic merge
storage/maria/ma_loghandler.c:
  Automatic merge
storage/maria/ma_open.c:
  Disable code that is only relevant for EXTERNAL_LOCKING
storage/maria/ma_sp_key.c:
  Automatic merge
storage/maria/ma_write.c:
  Automatic merge
storage/maria/trnman.c:
  Automatic merge

This also adds a check that MyISAM tables with incompatible checksums are detected by CHECK TABLE ... [FOR UPGRADE] and thus also by mysql_upgrade.
The tables that are incomatible are MyISAM tables with ROW_FORMAT=fixed and has VARCHAR fields and have CHECKSUM enabled.
Before these tables gave different checksum if you used CHECK TABLE with or without EXTENDED

mysql-test/r/old-mode.result:
  Now we get same results with and without EXTENDED
mysql-test/r/row-checksum-old.result:
  Initial results
mysql-test/r/row-checksum.result:
  Initial results
mysql-test/t/old-mode.test:
  Added test with QUICK to show that the live checksum is not used when running with --old
mysql-test/t/row-checksum-old-master.opt:
  Start mysqld with --old mode to enable old checksum code
mysql-test/t/row-checksum-old.test:
  Run row-checksum test under mysqld --old
mysql-test/t/row-checksum.test:
  Verify that checksum are calculated the same way with and without EXTENDED
  We run this with several storage engines to ensure results are the same over storage engines
sql/ha_partition.cc:
  Use new HA_HAS_xxx_CHECKSUM flags
sql/handler.cc:
  Use new HA_HAS_xxx_CHECKSUM flags
sql/handler.h:
  Split HA_HAS_CHECKSUM into HA_HAS_NEW_CHECKSUM and HA_HAS_OLD_CHECKSUM flags.
  This is a safe API change as only MyISAM and Maria should use these handler flags.
sql/sql_show.cc:
  Use new HA_HAS_xxx_CHECKSUM flags
sql/sql_table.cc:
  Use file->checksum() for live checksums if the life checksum method corresponds to the mysqld --old flag
storage/maria/ha_maria.cc:
  Use new HA_HAS_xxx_CHECKSUM flags
storage/myisam/ha_myisam.cc:
  Set HA_HAS_OLD_CHECKSUM and/or HA_HAS_NEW_CHECKSUM flags depending on if this is a new myisam or old myisam file
  Add method check_for_upgrade() to detect if the table is of old version with a checksum that is incompatible with CHECK TABLE ... EXTENDED
storage/myisam/ha_myisam.h:
  Added check_for_upgrade()
storage/myisam/mi_open.c:
  Removed not neede cast
  Initialize share->has_null_fields and share->has_varchar_fields variables
storage/myisam/myisamdef.h:
  Added share->has_null_fields and share->has_varchar_fields

Fixed also some similar issues in MyISAM. This was not noticed before as MyISAM did a second retry without key cache (which just made the second repair attempty slower)

storage/maria/ha_maria.cc:
  Print information if we retry without quick in case of CHECK TABLE table_name QUICK
  Remove T_QUICK flag when retrying repair, but set T_SAFE_REPAIR to ensure we don't loose any rows
  Remember T_RETRY_WITH_QUICK flag when restoring repair flags
  Don't print 'checking table' if we are not checking table in auto-repair
  Don't use T_QUICK in auto repair (safer)
  Changed parameter of type HA_PARAM &param to HA_PARAM *param
storage/maria/ha_maria.h:
  Changed parameter of type HA_PARAM &param to HA_PARAM *param
storage/maria/ma_check.c:
  Added retry without T_QUICK if there is a problem reading a row in BLOCK_RECORD
storage/myisam/ha_myisam.cc:
  Remove T_QUICK flag when retrying repair, but set T_SAFE_REPAIR to ensure we don't loose any rows
  Remember T_RETRY_WITH_QUICK flag when restoring repair flags

storage/maria/ma_loghandler.c:
  Processed case when current buffer filled but there is no new LSN in the buffer generated (so it is no need to fluesh this buffer) and buffer->last_lsn is LSN_IMPOSSIBLE.

include/m_string.h:
  new macro like LINT_INIT but for struct. In m_string.h because bzero() becomes available only there
storage/maria/ma_check.c:
  compiler error under Windows (declaration after statements...)
storage/maria/ma_key.c:
  trnman.h is not in include/ but in storage/maria
storage/maria/ma_sp_key.c:
  trnman.h is not in include/ but in storage/maria
storage/maria/ma_write.c:
  avoid compiler warning (org_key.flag may be used uninitialized)

.bzr-mysql/default.conf:
  Automatic merge
config/ac-macros/plugins.m4:
  Automatic merge
configure.in:
  Automatic merge
include/my_global.h:
  Automatic merge
mysql-test/include/maria_empty_logs.inc:
  Use Guilmhems version, but don't echo use database
mysql-test/r/maria-no-logging.result:
  Automatic merge
mysql-test/r/maria-page-checksum.result:
  Automatic merge
mysql-test/r/maria-recover.result:
  Automatic merge
mysql-test/r/maria2.result:
  Automatic merge
mysql-test/t/maria-no-logging.test:
  Automatic merge
mysql-test/t/maria-page-checksum.test:
  Automatic merge
mysql-test/t/maria-purge.test:
  Automatic merge
mysql-test/t/maria-recover.test:
  Automatic merge
mysql-test/t/maria2.test:
  Automatic merge
sql/sql_table.cc:
  Automatic merge
storage/maria/CMakeLists.txt:
  Automatic merge
storage/maria/ma_ft_parser.c:
  Automatic merge
storage/maria/ma_loghandler.c:
  Automatic merge
storage/maria/ma_recovery.c:
  Automatic merge
storage/maria/ma_rt_test.c:
  Manual merge
storage/maria/ma_state.c:
  Automatic merge
storage/maria/ma_test_force_start.pl:
  Automatic merge
storage/maria/plug.in:
  Automatic merge
storage/maria/unittest/CMakeLists.txt:
  Automatic merge
storage/maria/unittest/Makefile.am:
  Automatic merge
storage/maria/unittest/ma_test_all-t:
  Automatic merge
storage/maria/unittest/ma_test_loghandler_multithread-t.c:
  Automatic merge
storage/maria/unittest/ma_test_recovery.pl:
  Automatic merge
storage/myisam/rt_test.c:
  Automatic merge

Store max_trid in index file as state.create_trid. This is used to pack all transids in the index pages relative to max possible transid for file.
Enable versioning for transactional tables with index. Tables with an auto-increment key, rtree or fulltext keys are not versioned.
Changed info->lastkey to type MARIA_KEY. Removed info->lastkey_length as this is now part of info->lastkey
Renamed old info->lastkey to info->lastkey_buff
Use exact key lenghts for keys, not USE_WHOLE_KEY
For partial key searches, use SEARCH_PART_KEY
When searching to insert new key on page, use SEARCH_INSERT to mark that key has rowid

Changes done in a lot of files:
- Modified functions to use MARIA_KEY instead of key pointer and key length
- Use keyinfo->root_lock instead of share->key_root_lock[keynr]
- Simplify code by using local variable keyinfo instead if share->keyinfo[i]
- Added #fdef EXTERNAL_LOCKING around removed state elements
- HA_MAX_KEY_BUFF -> MARIA_MAX_KEY_BUFF (to reserve space for transid)
- Changed type of 'nextflag' to uint32 to ensure all SEARCH_xxx flags fits into it

.bzrignore:
  Added missing temporary directory
extra/Makefile.am:
  comp_err is now deleted on make distclean
include/maria.h:
  Added structure MARIA_KEY, which is used for intern key objects in Maria.
  Changed functions to take MARIA_KEY as an argument instead of pointer to packed key.
  Changed some functions that always return true or false to my_bool.
  Added virtual function make_key() to avoid if in _ma_make_key()
  Moved rw_lock_t for locking trees from share->key_root_lock to MARIA_KEYDEF. This makes usage of the locks simpler and faster
include/my_base.h:
  Added HA_RTREE_INDEX flag to mark rtree index. Used for easier checks in ma_check()
  Added SEARCH_INSERT to be used when inserting new keys
  Added SEARCH_PART_KEY for partial searches
  Added SEARCH_USER_KEY_HAS_TRANSID to be used when key we use for searching in btree has a TRANSID
  Added SEARCH_PAGE_KEY_HAS_TRANSID to be used when key we found in btree has a transid
include/my_handler.h:
  Make next_flag 32 bit to make sure we can handle all SEARCH_ bits
mysql-test/include/maria_empty_logs.inc:
  Read and restore current database; Don't assume we are using mysqltest.
  Don't log use databasename to log. Using this include should not cause any result changes.
mysql-test/r/maria-gis-rtree-dynamic.result:
  Updated results after adding some check table commands to help pinpoint errors
mysql-test/r/maria-mvcc.result:
  New tests
mysql-test/r/maria-purge.result:
  New result after adding removal of logs
mysql-test/r/maria-recovery-big.result:
  maria_empty_logs doesn't log 'use mysqltest' anymore
mysql-test/r/maria-recovery-bitmap.result:
  maria_empty_logs doesn't log 'use mysqltest' anymore
mysql-test/r/maria-recovery-rtree-ft.result:
  maria_empty_logs doesn't log 'use mysqltest' anymore
mysql-test/r/maria-recovery.result:
  maria_empty_logs doesn't log 'use mysqltest' anymore
mysql-test/r/maria.result:
  New tests
mysql-test/r/variables-big.result:
  Don't log id as it's not predictable
mysql-test/suite/rpl_ndb/r/rpl_truncate_7ndb_2.result:
  Updated results to new binlog results. (Test has not been run in a long time as it requires --big)
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb_2-master.opt:
  Moved file to ndb replication test directory
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb_2.test:
  Fixed wrong path to included tests
mysql-test/t/maria-gis-rtree-dynamic.test:
  Added some check table commands to help pinpoint errors
mysql-test/t/maria-mvcc.test:
  New tests
mysql-test/t/maria-purge.test:
  Remove logs to make test results predictable
mysql-test/t/maria.test:
  New tests for some possible problems
mysql-test/t/variables-big.test:
  Don't log id as it's not predictable
mysys/my_handler.c:
  Updated function comment to reflect old code
  Changed nextflag to be uint32 to ensure we can have flags > 16 bit
  Changed checking if we are in insert with NULL keys as next_flag can now include additional bits that have to be ignored.
  Added SEARCH_INSERT flag to be used when inserting new keys in btree. This flag tells us the that the keys includes row position and it's thus safe to remove SEARCH_FIND
  Added comparision of transid. This is only done if the keys actually have a transid, which is indicated by nextflag
mysys/my_lock.c:
  Fixed wrong test (Found by Guilhem)
scripts/Makefile.am:
  Ensure that test programs are deleted by make clean
sql/rpl_rli.cc:
  Moved assignment order to fix compiler warning
storage/heap/hp_write.c:
  Add SEARCH_INSERT to signal ha_key_cmp that we we should also compare rowid for keys
storage/maria/Makefile.am:
  Remove also maria log files when doing make distclean
storage/maria/ha_maria.cc:
  Use 'file->start_state' as default state for transactional tables without versioning
  At table unlock, set file->state to point to live state. (Needed for information schema to pick up right number of rows)
  In ha_maria::implicit_commit() move all locked (ie open) tables to new transaction. This is needed to ensure ha_maria->info doesn't point to a deleted history event.
  Disable concurrent inserts for insert ... select and table changes with subqueries if statement based replication as this would cause wrong results on slave
storage/maria/ma_blockrec.c:
  Updated comment
storage/maria/ma_check.c:
  Compact key pages (removes transid) when doing --zerofill
  Check that 'page_flag' on key pages contains KEYPAGE_FLAG_HAS_TRANSID if there is a single key on the page with a transid
  Modified functions to use MARIA_KEY instead of key pointer and key length
  Use new interface to _ma_rec_pos(), _ma_dpointer(), _ma_ft_del(), ma_update_state_lsn()
  Removed not needed argument from get_record_for_key()
  Fixed that we check doesn't give errors for RTREE; We now treath these like SPATIAL
  Remove some SPATIAL specific code where the virtual functions can handle this in a general manner
  Use info->lastkey_buff instead of info->lastkey
  _ma_dpos() -> _ma_row_pos_from_key()
  _ma_make_key() -> keyinfo->make_key()
  _ma_print_key() -> _ma_print_keydata()
  _ma_move_key() -> ma_copy_copy()
  Add SEARCH_INSERT to signal ha_key_cmp that we we should also compare rowid for keys
  Ensure that data on page doesn't overwrite page checksum position
  Use DBUG_DUMP_KEY instead of DBUG_DUMP
  Use exact key lengths instead of USE_WHOLE_KEY to ha_key_cmp()
  Fixed check if rowid points outside of BLOCK_RECORD data file
  Use info->lastkey_buff instead of key on stack in some safe places
  Added #fdef EXTERNAL_LOCKING around removed state elements
storage/maria/ma_close.c:
  Use keyinfo->root_lock instead of share->key_root_lock[keynr]
storage/maria/ma_create.c:
  Removed assert that is already checked in maria_init()
  Force transactinal tables to be of type BLOCK_RECORD
  Fixed wrong usage of HA_PACK_RECORD (should be HA_OPTION_PACK_RECORD)
  Mark keys that uses HA_KEY_ALG_RTREE with HA_RTREE_INDEX for easier handling of these in ma_check
  Store max_trid in index file as state.create_trid. This is used to pack all transids in the index pages relative to max possible transid for file.
storage/maria/ma_dbug.c:
  Changed _ma_print_key() to use MARIA_KEY
storage/maria/ma_delete.c:
  Modified functions to use MARIA_KEY instead of key pointer and key length
  info->lastkey2-> info->lastkey_buff2
  Added SEARCH_INSERT to signal ha_key_cmp that we we should also compare rowid for keys
  Use new interface for get_key(), _ma_get_last_key() and others
  _ma_dpos() -> ma_row_pos_from_key()
  Simplify setting of prev_key in del()
  Ensure that KEYPAGE_FLAG_HAS_TRANSID is set in page_flag if key page has transid
  Treath key pages that may have a transid as if keys would be of variable length
storage/maria/ma_delete_all.c:
  Reset history state if maria_delete_all_rows() are called
  Update parameters to _ma_update_state_lsns() call
storage/maria/ma_extra.c:
  Store and restore info->lastkey
storage/maria/ma_ft_boolean_search.c:
  Modified functions to use MARIA_KEY instead of key pointer and key length
storage/maria/ma_ft_nlq_search.c:
  Modified functions to use MARIA_KEY instead of key pointer and key length
  Use lastkey_buff2 instead of info->lastkey+info->s->base.max_key_length (same thing)
storage/maria/ma_ft_update.c:
  Modified functions to use MARIA_KEY instead of key pointer and key length
storage/maria/ma_ftdefs.h:
  Modified functions to use MARIA_KEY instead of key pointer and key length
storage/maria/ma_fulltext.h:
  Modified functions to use MARIA_KEY instead of key pointer and key length
storage/maria/ma_init.c:
  Check if blocksize is legal
  (Moved test here from ma_open())
storage/maria/ma_key.c:
  Added functions for storing/reading of transid 
  Modified functions to use MARIA_KEY instead of key pointer and key length
  Moved _ma_sp_make_key() out of _ma_make_key() as we now use keyinfo->make_key to create keys
  Add transid to keys if table is versioned
  Added _ma_copy_key()
storage/maria/ma_key_recover.c:
  Add logging of page_flag (holds information if there are keys with transid on page)
  Changed DBUG_PRINT("info" -> DBUG_PRINT("redo" as the redo logging can be quite extensive
  Added lots of DBUG_PRINT()
  Added support for index page operations: KEY_OP_SET_PAGEFLAG and KEY_OP_COMPACT_PAGE
storage/maria/ma_key_recover.h:
  Modified functions to use MARIA_KEY instead of key pointer and key length
storage/maria/ma_locking.c:
  Added new arguments to _ma_update_state_lsns_sub()
storage/maria/ma_loghandler.c:
  Fixed all logging of LSN to look similar in DBUG log
  Changed if (left != 0) to if (left) as the later is used also later in the code
storage/maria/ma_loghandler.h:
  Added new index page operations
storage/maria/ma_open.c:
  Removed allocated "state_dummy" and instead use share->state.common for transactional tables that are not versioned
  This is needed to not get double increments of state.records (one in ma_write.c and on when log is written)
  Changed info->lastkey to MARIA_KEY type
  Removed resetting of MARIA_HA variables that have 0 as default value (as info is zerofilled)
  Enable versioning for transactional tables with index. Tables with an auto-increment key, rtree or fulltext keys are not versioned.
  Check on open that state.create_trid is correct
  Extend share->base.max_key_length in case of transactional table so that it can hold transid
  Removed 4.0 compatible fulltext key mode as this is not relevant for Maria
  Removed old and wrong #ifdef ENABLE_WHEN_WE_HAVE_TRANS_ROW_ID code block
  Initialize all new virtual function pointers
  Removed storing of state->unique, state->process and store state->create_trid instead
storage/maria/ma_page.c:
  Added comment to describe key page structure
  Added functions to compact key page and log the compact operation
storage/maria/ma_range.c:
  Modified functions to use MARIA_KEY instead of key pointer and key length
  Use SEARCH_PART_KEY indicator instead of USE_WHOLE_KEY to detect if we are doing a part key search
  Added handling of pages with transid
storage/maria/ma_recovery.c:
  Don't assert if table we opened are not transactional. This may be a table which has been changed from transactional to not transactinal
  Added new arguments to _ma_update_state_lsns()
storage/maria/ma_rename.c:
  Added new arguments to _ma_update_state_lsns()
storage/maria/ma_rkey.c:
  Modified functions to use MARIA_KEY instead of key pointer and key length
  Don't use USE_WHOLE_KEY, use real length of key
  Use share->row_is_visible() to test if row is visible
  Moved search_flag == HA_READ_KEY_EXACT out of 'read-next-row' loop as this only need to be tested once
  Removed test if last_used_keyseg != 0 as this is always true
storage/maria/ma_rnext.c:
  Modified functions to use MARIA_KEY instead of key pointer and key length
  Simplify code by using local variable keyinfo instead if share->keyinfo[i]
  Use share->row_is_visible() to test if row is visible
storage/maria/ma_rnext_same.c:
  Modified functions to use MARIA_KEY instead of key pointer and key length
  lastkey2 -> lastkey_buff2
storage/maria/ma_rprev.c:
  Modified functions to use MARIA_KEY instead of key pointer and key length
  Simplify code by using local variable keyinfo instead if share->keyinfo[i]
  Use share->row_is_visible() to test if row is visible
storage/maria/ma_rsame.c:
  Updated comment
  Simplify code by using local variable keyinfo instead if share->keyinfo[i]
  Modified functions to use MARIA_KEY instead of key pointer and key length
storage/maria/ma_rsamepos.c:
  Modified functions to use MARIA_KEY instead of key pointer and key length
storage/maria/ma_rt_index.c:
  Modified functions to use MARIA_KEY instead of key pointer and key length
  Use better variable names
  Removed not needed casts
  _ma_dpos() -> _ma_row_pos_from_key()
  Use info->last_rtree_keypos to save position to key instead of info->int_keypos
  Simplify err: condition
  Changed return type for maria_rtree_insert() to my_bool as we are only intressed in ok/fail from this function
storage/maria/ma_rt_index.h:
  Modified functions to use MARIA_KEY instead of key pointer and key length
storage/maria/ma_rt_key.c:
  Modified functions to use MARIA_KEY instead of key pointer and key length
  Simplify maria_rtree_add_key by combining idenitcal code and removing added_len
storage/maria/ma_rt_key.h:
  Modified functions to use MARIA_KEY instead of key pointer and key length
storage/maria/ma_rt_mbr.c:
  Changed type of 'nextflag' to uint32
  Added 'to' argument to RT_PAGE_MBR_XXX functions to more clearly see which variables changes value
storage/maria/ma_rt_mbr.h:
  Changed type of 'nextflag' to uint32
storage/maria/ma_rt_split.c:
  Modified functions to use MARIA_KEY instead of key pointer and key length
  key_length -> key_data_length to catch possible errors
storage/maria/ma_rt_test.c:
  Fixed wrong comment
  Reset recinfo to avoid valgrind varnings
  Fixed wrong argument to create_record() that caused test to fail
storage/maria/ma_search.c:
  Modified functions to use MARIA_KEY instead of key pointer and key length
  Added support of keys with optional trid
  Test for SEARCH_PART_KEY instead of USE_WHOLE_KEY to detect part key reads
  _ma_dpos() -> _ma_row_pos_from_key()
  If there may be keys with transid on the page, have _ma_bin_search() call _ma_seq_search()
  Add _ma_skip_xxx() functions to quickly step over keys (faster than calling get_key() in most cases as we don't have to copy key data)
  Combine similar code at end of _ma_get_binary_pack_key()
  Removed not used function _ma_move_key()
  In _ma_search_next() don't call _ma_search() if we aren't on a nod page.
  Update info->cur_row.trid with trid for found key
  
  
  
  Removed some not needed casts
  Added _ma_trid_from_key()
  Use MARIA_SHARE instead of MARIA_HA as arguments to _ma_rec_pos(), _ma_dpointer() and _ma_xxx_keypos_to_recpos() to make functions faster and smaller
storage/maria/ma_sort.c:
  Modified functions to use MARIA_KEY instead of key pointer and key length
storage/maria/ma_sp_defs.h:
  _ma_sp_make_key() now fills in and returns (MARIA_KEY *) value
storage/maria/ma_sp_key.c:
  _ma_sp_make_key() now fills in and returns (MARIA_KEY *) value
  Don't test sizeof(double), test against 8 as we are using float8store()
  Use mi_float8store() instead of doing swap of value (same thing but faster)
storage/maria/ma_state.c:
  maria_versioning() now only calls _ma_block_get_status() if table supports versioning
  Added _ma_row_visible_xxx() functions for different occasions
  When emptying history, set info->state to point to the first history event.
storage/maria/ma_state.h:
  Added _ma_row_visible_xxx() prototypes
storage/maria/ma_static.c:
  Indentation changes
storage/maria/ma_statrec.c:
  Fixed arguments to _ma_dpointer() and _ma_rec_pos()
storage/maria/ma_test1.c:
  Call init_thr_lock() if we have versioning
storage/maria/ma_test2.c:
  Call init_thr_lock() if we have versioning
storage/maria/ma_unique.c:
  Modified functions to use MARIA_KEY
storage/maria/ma_update.c:
  Modified functions to use MARIA_KEY instead of key pointer and key length
storage/maria/ma_write.c:
  Modified functions to use MARIA_KEY instead of key pointer and key length
  Simplify code by using local variable keyinfo instead if share->keyinfo[i]
  In _ma_enlarge_root(), mark in page_flag if new key has transid
  _ma_dpos() -> _ma_row_pos_from_key()
  Changed return type of _ma_ck_write_tree() to my_bool as we are only testing if result is true or not
  Moved 'reversed' to outside block as area was used later
storage/maria/maria_chk.c:
  Added error if trying to sort with HA_BINARY_PACK_KEY
  Use new interface to get_key() and _ma_dpointer()
  _ma_dpos() -> _ma_row_pos_from_key()
storage/maria/maria_def.h:
  Modified functions to use MARIA_KEY instead of key pointer and key length
  Added 'common' to MARIA_SHARE->state for storing state for transactional tables without versioning
  Added create_trid to MARIA_SHARE
  Removed not used state variables 'process' and 'unique'
  Added defines for handling TRID's in index pages
  Changed to use MARIA_SHARE instead of MARIA_HA for some functions
  Added 'have_versioning' flag if table supports versioning
  Moved key_root_lock from MARIA_SHARE to MARIA_KEYDEF
  Changed last_key to be of type MARIA_KEY. Removed lastkey_length
  lastkey -> lastkey_buff, lastkey2 -> lastkey_buff2
  Added _ma_get_used_and_nod_with_flag() for faster access to page data when page_flag is read
  Added DBUG_DUMP_KEY for easier DBUG_DUMP of a key
  Changed 'nextflag' and assocaited variables to uint32
storage/maria/maria_ftdump.c:
  lastkey -> lastkey_buff
storage/maria/trnman.c:
  Fixed wrong initialization of min_read_from and max_commit_trid
  Added trnman_get_min_safe_trid()
storage/maria/unittest/ma_test_all-t:
  Added --start-from
storage/myisam/mi_check.c:
  Added SEARCH_INSERT, as ha_key_cmp() needs it when doing key comparision for inserting key on page in rowid order
storage/myisam/mi_delete.c:
  Added SEARCH_INSERT, as ha_key_cmp() needs it when doing key comparision for inserting key on page in rowid order
storage/myisam/mi_range.c:
  Updated comment
storage/myisam/mi_write.c:
  Added SEARCH_INSERT, as ha_key_cmp() needs it when doing key comparision for inserting key on page in rowid order
storage/myisam/rt_index.c:
  Fixed wrong parameter to rtree_get_req() which could cause crash

mysql-test/r/maria-recover.result:
  result update
mysql-test/t/maria-recover.test:
  making test independent of / or \ in file names (failed under Windows)
storage/maria/ma_test_force_start.pl:
  indentation

Port of ma_test_force_start.pl (test program for --maria-force-start-after-recovery-failures) to Windows.

storage/maria/ma_test_force_start.pl:
  port to Windows: detection of where 'mysql' command-line client is (debug/release/etc)), .exe suffix,
  --console instead of --mem, --P instead of --socket, taskkill instead of perl's kill.

tests is not used in Maria, this fixes BUG#34744 "Maria Unit test "lockman2" fails
on Mac OS X 10.4 PowerPC 64-bit"

storage/maria/unittest/CMakeLists.txt:
  disabling lockman2-t
storage/maria/unittest/Makefile.am:
  disabling lockman2-t

BUG#35823 "Maria: log handler assertion (page[page_offset] & (3 << 6)) == 0x00... fails"
Both random problems can be explained by the REDO phase starting from a log horizon which is not a LSN,
which is the bug fixed here.

storage/maria/ma_recovery.c:
  In Recovery, REDO phase needs to start log reading from a LSN, not a log horizon: start_address was only
  guaranteed to be a horizon, not necessarily a LSN.
  On some machine and test, it happened that start_address was only a log horizon, and run_redo_phase()
  tried to read from there, and log handler naturally refused that:
  ma_loghandler.c:6797: translog_read_record_header_from_buffer: Assertion `translog_is_LSN_chunk(page[page_offset])' failed. And in non-debug build, just the "redo phase failed" message in the error log.
  This was random, because depended on amount of checkpoints which is timing-dependent; also depended on Maria tests
  ran or skipped (so, debug or non-debug builds)... Bad code was introduced by me end of December so it's likely
  to explain lots of random log handler errors we observed since.

mysql-test/r/maria-page-checksum.result:
  result for new test portion. Without the code fix, you would see a wrong "yes" or "no" in the "Crashsafe" line
  for iterations 2,9,14.
mysql-test/t/maria-page-checksum.test:
  Adding test for BUG#37005 "Maria: ALTER TABLE TRANSACTIONAL=0 leaves table transactional inside Maria"
sql/sql_table.cc:
  In ALTER TABLE, we already rebuilt the table entirely if the DEFAULT CHARSET, ROW_FORMAT or PAGE_CHECKSUM
  clauses were used; we have to do the same if the TRANSACTIONAL clause is used, because it affects
  the table inside the engine (for example, Maria makes shorter rows in non-transactional tables).
  Not doing so led to the BUG#37005, where ALTER TABLE TRANSACTIONAL=0 sometimes left the table
  transactional into Maria though not in the frm.

storage/maria/ma_loghandler.c:
  Now we need buffer number to set dirty buffers mask.

_ma_scan_block_record() has "while (likely(bits))" where bits is ulonglong, so was cast to long
which lost most significant bits (32-bit linux), and test yielded false.

include/my_global.h:
  It's too easy to think that because "if (some_longlong)" works as intended, "if (likely(longlong))" will work too,
  though it does not. Making likely() cast to bool.
mysql-test/r/maria2.result:
  Result. Before fixing the bug, 810 was 812 and 0 was 812 (DELETE and SELECT found no rows
  though they were there).
mysql-test/t/maria2.test:
  Testcase for the bug. maria.test is huge now, so starting a second test file instead.

in ma_rt_test -M (BUG#36321); keyinfo/recinfo/keyseg had non-initialized parts.
maria_scan() was not wrapped in maria_scan_init()/end() so "ma_rt_test -M" found no rows.
Preparing for inclusion into ma_test_all-t and ma_test_recovery.pl (still prevented by
BUG#37307 "Maria: R-tree unit test produces corrupted table").

storage/maria/ma_rt_test.c:
  Some members of keyinfo, recinfo, keyseg had non-initialized parts, led to Valgrind errors,
  and also segmentation fault when running with -M (=BLOCK_RECORD) (BUG#36321).
  We now bzero them like they are in mi_test1.
  Other problems:
  - maria_scan() was not wrapped in maria_scan_init()/end() so "ma_rt_test -M" found no rows.
  - --silent had almost no effect, now it really silences normal output.
  - Some errors were going to stdout, they now go to stderr.
  Added option for testing versioning, to fit well into ma_test_all-t.
storage/maria/unittest/ma_test_all-t:
  preparing for running ma_rt_test when ma_rt_test remaining bugs are fixed
storage/maria/unittest/ma_test_recovery.pl:
  preparing for running ma_rt_test when ma_rt_test remaining bugs are fixed
storage/myisam/rt_test.c:
  Some members of keyinfo, recinfo, keyseg were not initialized, led to Valgrind errors.
  We now bzero them like they are in mi_test1.

storage/maria/ma_loghandler.c:
  New flush procedure added.
storage/maria/unittest/Makefile.am:
  Test of many multi-thread flush added
storage/maria/unittest/ma_test_loghandler_multithread-t.c:
  Test of many multi-thread flush added

storage/maria/CMakeLists.txt:
  add missing file
storage/maria/ma_state.c:
  two include files are in storage/maria, not in include/, so they need "" not <>, or compiler misses them.

Verify that if Maria table is absent or initially empty, CREATE SELECT and INSERT SELECT with enough
rows cause no logging

mysql-test/include/maria_empty_logs.inc:
  don't assume that mysqltest is the default db
mysql-test/r/maria-no-logging.result:
  result. Without the optimization of disabling logging in ha_maria::start_bulk_insert(),
  we see 24k instead of 16k, in the cases where the table is empty.
mysql-test/r/maria-purge.result:
  side effect of change to maria_empty_logs.inc
mysql-test/t/maria-purge.test:
  maria-purge.test used to fail when run in a group like this "--big t/*maria*.test" because
  SHOW ENGINE MARIA LOGS was influenced by previous tests; deleting logs to fix that.

enable maria in the default plugin configuration

config/ac-macros/plugins.m4:
  typo in comment fixed.
  change default plugin configuration to be "default" not "none".
  don't print default plugin configuration in the help text (as it's "default" anyway)
configure.in:
  use "default" plugin configuration by default, not "none"
storage/maria/plug.in:
  enable maria in the default plugin configuration

mysql-test/valgrind.supp:
  Fixed suppression rule
storage/maria/unittest/trnman-t.c:
  Test failed becasue it accessed reused structures.
  I fixed this by creating a separate array to hold trids for the transactions