Using __attribute__  needs my_attribute.h include

(Simple speedup)

(We where using stage_copying_to_tmp_table twice)

Not printing the value" with binlog-row-image=minimal"

Merged Rows_log_event::print_verbose_one_row() and log_event_print_value()
with MySQL 5.7
Added flush after writing of Table_map_log_event() to fix wrong order of
lines in output. This causes a lot of changes in some test results.

- XA
- Transaction_context_event (used by MysQL group replication)
- View change event (used by MysQL group replication)

Fixed failure in tests when running optimized code
- Some assert() was using code that had to be executed
Fixed copying of some uninitialized data (fixed valgrind warning)

(Makes TABLE a bit smaller)

changes in query execution plans.
Fixed by introducing table->rpl_write_set which holds which columns should
be stored in the binary log.

Other things:
- Removed some not needed references to read_set and write_set to make
  code really changing read_set and write_set easier to read
  (in opt_range.cc)
- Added error handling of failed unpack_current_row()
- Added missing call to mark_columns_needed_for_insert() for DELAYED INSERT
- Removed not used functions in_read_set() and in_write_set()
- In rpl_record.cc, removed not used variable error

Removed old not needed code withing #if
Changed 0x%lx to %p

The bitmap implementation defines two template Bitmap classes. One
optimized for 64-bit (default) wide bitmaps while the other is used for
all other widths.

In order to optimize the computations, Bitmap<64> class has defined its
own member functions for bitmap operations, the other one, however,
relies on mysys' bitmap implementation (mysys/my_bitmap.c).

Issue 1:
In case of non 64-bit Bitmap class, intersect() wrongly reset the
received bitmap while initialising a new local bitmap structure
(bitmap_init() clears the bitmap buffer) thus, the received bitmap was
getting cleared.

Fixed by initializing the local bitmap structure by using a temporary
buffer and later copying the received bitmap to the initialised bitmap
structure.

Issue 2:
The non 64-bit Bitmap class had the Iterator missing which caused
compilation failure.

Also added a cmake variable to hold the MAX_INDEXES value when supplied
from the command prompt. (eg. cmake .. -DMAX_INDEXES=128U). Checks have
been put in place to trigger build failure if MAX_INDEXES value is
greater than 128.

Test modifications:
* Introduced include/have_max_indexes_[64|128].inc to facilitate
skipping of tests for which the output differs with different
MAX_INDEXES.

* Introduced include/max_indexes.inc which would get modified by cmake
to reflect the MAX_INDEXES value used to build the server. This file
simply sets an mtr variable '$max_indexes' to show the MAX_INDEXES
value, which will then be consumed by the above introduced include file.

* Some tests (portions), dependent on MAX_INDEXES value, have been moved
to separate test files.

Fix the conditions for systemd scripts with '@' in path.

commit 6b203426

MDEV-8981: Analyze stmt - cycles can overflow

A comment in debian/mariadb-server-10.1.postinst says: "can safely run on
upgrades with existing databases". While this is true there're a few reasons not
to do that:
- it increases installation time (it has to run rather heavy mysqld multiple times)
- as well as it increases mysqld downtime
- it may fail if database has some plugin specific configs (see MDEV-8437)
- there should be no need to run this script on upgrade: they should be handled
  by mysql_upgrade to
- RPM postin doesn't call it if database directory exists

Also postinst is not supposed to create database directories: let
mysql_install_db do that intead.

There was code that was supposed to "catch upgrades from previous versions where
the root password wasn't set". But it is wrong in many regards:
- it is supposed to be executed against running server, but at this point server
  should be down, which makes this code no-op
- if the above is fixed, root password will be requested twice (initial root
  password request + this one)
- it asks for a password only once, while "initial root password request" asks
  twice (password + password verification)
- it may give false positive if unix socket based authentication is in effect

Removed this code since it didn't work for quite a while (at least since
mysql-5.1) and nobody cared about it.

There is no strong need to change password column: the only side effect is
that 4.0 -> 10.1 upgrades may get root/debian-sys-maint passwords stored in old
format. This should be perfectly acceptable, since all password at this point
are stored in old format.

Removed redundant attempt to create mysql.plugin table:
- original code was supposed to INSTALL some plugins:
  INSERT INTO plugin VALUES ('innodb', 'ha_innodb.so'),
    ('federated', 'ha_federated.so'), ('blackhole', 'ha_blackhole.so'),
    ('archive', 'ha_archive.so');
- original code was supposed to fail if mysql.plugin exists:
  The query sequence is supposed to be aborted if the CREATE TABLE fails due
  to an already existent table in which case the admin might already have
  chosen to remove one or more plugins.
- mysql.plugin must've been created by preceeding mysql_install_db anyway

During the process of guessing the IP address, if bind-address
is INADDR_ANY, mysqld should proceed with address specified via
wsrep_node_address or use one from network interfaces.

Patch contributed by darkain (pull#115).

Analysis: Lengths which are not UNIV_SQL_NULL, but bigger than the following
number indicate that a field contains a reference to an externally
stored part of the field in the tablespace. The length field then
contains the sum of the following flag and the locally stored len.

This was incorrectly set to

define UNIV_EXTERN_STORAGE_FIELD (UNIV_SQL_NULL - UNIV_PAGE_SIZE_MAX)

When it should be

define UNIV_EXTERN_STORAGE_FIELD (UNIV_SQL_NULL - UNIV_PAGE_SIZE_DEF)

Additionally, we need to disable support for > 16K page size for
row compressed tables because a compressed page directory entry
reserves 14 bits for the start offset and 2 bits for flags.
This limits the uncompressed page size to 16k. To support
larger pages page directory entry needs to be larger.

Post-fix:
Reverting the patch for MDEV-6069 brought some ALTERs with
ENGINE=MYISAM back into the mysql_system_tables_fix.sql
script. As a result, running mysql_upgrade with global
enforce_storage_engine=INNODB (or any other non-MyISAM
engine, for that matter) would fail.

Fixed by locally unsetting enforce_storage_engine in the
upgrade script.

The verifier exception is caused by using thread local storage key
after key was deleted.

my_free() used current_thd within malloc size callback, which does
pthread_get_specific(THR_THD), but THR_THD is already deleted at this
point.

The fix moves pthread_key_delete() to a later point in shutdown.

This reverts commit 5e6f1236.

This reverts commit f8381d93.

Test used aes_ctr that is not available everywhere when aes_cbc is fine also
for this test.

Some modifications in galera_new_cluster :

* Do not use absolute path for systemctl
* Fix parameter substitution syntax

Now this error out and refers to galera_new_cluster.

Use galera_new_cluster instead. systemctl start mariadb@bootstrap
will generate error message, use_galera_new_cluster.conf is the name
of the file that will generate this error.

Output:

Job for mariadb@bootstrap.service failed. See "systemctl status
mariadb@bootstrap.service" and "journalctl -xe" for details.

● mariadb@bootstrap.service - MariaDB database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb@.service; disabled;
vendor preset: disabled)
  Drop-In: /usr/lib/systemd/system/mariadb@bootstrap.service.d
           └─use_galera_new_cluster.conf
   Active: failed (Result: exit-code) since Thu 2015-10-15 19:27:52
CEST; 5s ago
  Process: 24334 ExecStart=/usr/bin/false (code=exited,
status=1/FAILURE)
  Process: 24330 ExecStart=/usr/bin/echo Please use galera_new_cluster
to start the mariadb service with --wsrep-new-cluster (code=exited,
status=0/SUCCESS)
 Main PID: 24334 (code=exited, status=1/FAILURE)

Oct 15 19:27:52 spaceman systemd[1]: Starting MariaDB database server...
Oct 15 19:27:52 spaceman systemd[1]: mariadb@bootstrap.service: main
process exited, code=exited, status=1/FAILURE
Oct 15 19:27:52 spaceman systemd[1]: Failed to start MariaDB database
server.
Oct 15 19:27:52 spaceman systemd[1]: Unit mariadb@bootstrap.service
entered failed state.
Oct 15 19:27:52 spaceman systemd[1]: mariadb@bootstrap.service failed.

        we don't test for not-existing gis extra in FRM.

Add comment about bind-address mentioned under galera section.

Redo log encryption used too short buffer when getting
encryption keys.

Part 2: removed hack workaround for bug we do not have.

small sixes of used_tables() usage

* clarify the comment in the preset file
* make boolean --aria-encrypt-tables option to work without an argument