mysql-test/t/rpl_user.test:
  Removing redundant reset master and deleting users from master
  and slave without using binary log.

into  mysql_cab_desk.:D:/source/c++/mysql-5.0-rpl-merge

This patch adds code to convert the path for LOAD DATA INFILE 
events to a Unix path which is needed for running mysql client
on Windows. 


client/mysqlbinlog.cc:
  BUG#32205 : Replaying statements from mysqlbinlog fails with a syntax error, replicates fine
  
  This patch adds code to convert the path for LOAD DATA INFILE 
  events to a Unix path which is needed for running mysql client
  on Windows. 
  
  The 'd:\x\y\z' path becomes 'd:xyz' when run in the client.

on the context.


mysql-test/r/mysqlbinlog.result:
  Result file change.
mysql-test/t/mysqlbinlog.test:
  Blanking out yet some numbers in file names.

mysql-test/r/mysqlbinlog.result:
  Result file change.
mysql-test/t/mysqlbinlog.test:
  Fixing test to not be dependent on the sequence numbers
  for file names generated by mysqlbinlog.

mysql-test/r/mix_innodb_myisam_binlog.result:
  Result change
mysql-test/t/binlog_start_comment.test:
  Adding --local-load to mysqlbinlog to prevent it from failing
  on Windows. Also adding --short-form.
mysql-test/t/mix_innodb_myisam_binlog.test:
  Extending LIKE pattern to use either \n or \r\n in order to work
  on Windows.

mysql-test/t/binlog_start_comment.test:
  Adding --local-infile=1 to enable local infile for mysql client.

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.0-rpl-merge


include/my_sys.h:
  Auto merged
sql/log.cc:
  Auto merged
sql/set_var.cc:
  Auto merged
sql/sql_acl.cc:
  Auto merged

mysql-test/include/have_local_infile.inc:
  BitKeeper file /data0/mkindahl/mysql-5.0-rpl-merge/mysql-test/include/have_local_infile.inc
mysql-test/r/have_local_infile.require:
  BitKeeper file /data0/mkindahl/mysql-5.0-rpl-merge/mysql-test/r/have_local_infile.require
mysql-test/t/binlog_start_comment.test:
  Test requires that local_infile is on, so added require for that.
mysql-test/t/rpl_sp.test:
  Adding missing sync_slave_with_master causing following tests to fail.

sql/sql_repl.cc:
  Adding cast to remove compile error on Windows platform.

mysql-test/t/rpl_transaction.test:
  Test only works for debug build.

mysql-test/r/bdb_notembedded.result:
  Result change.
mysql-test/r/rpl_loaddata_map.result:
  Result change.
mysql-test/t/rpl_loaddata_map.test:
  Blanking out file id as well.

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.0-rpl-merge


include/my_sys.h:
  Auto merged
mysql-test/r/blackhole.result:
  Auto merged
mysql-test/r/case.result:
  Auto merged
mysql-test/r/mysqlbinlog2.result:
  Auto merged
mysql-test/t/blackhole.test:
  Auto merged
mysql-test/t/case.test:
  Auto merged
sql/set_var.cc:
  Auto merged
sql/sql_acl.cc:
  Auto merged
sql/sql_parse.cc:
  Auto merged

into  mail.hezx.com:/media/sda3/work/mysql/bkwork/bug26489_corruption_in_relay_log/5.0

mysql-test/r/rpl_grant.result:
  update result

Here is the scenario that causes the failure.(by Mats)

1. The to-be corrupt log event (let's call it X), is split into two
   packets B and C on the network level (net_write_buff()). The parts
   are X = (x',x''). The part x' ends up in packet B and part x''
   ends up in packet C. Prior to the corrupt event X, the event Y has
   been written successfully, but has been split into two packets as
   well, which we call (y',y'').
2. The master sends packet A = (y'',x') to the slave, increases the
   packet sequence number, the slave receives the packet, but fails
   to reply before the master gets a timeout.
3. Since the master got a timeout, it reports failure, and aborts
   sending the binary log by exiting mysql_binlog_send(). However, it
   leaves the buffer intact, still holding y'' (but not x', since the
   write_pos is not increased).
4. After exiting mysql_binlog_send(), the master does a
   disconnection of the client thread, which involves sending an
   error message e to the client (i.e., the slave).
5. In this case, net_write_buff() is used again, but this time the
   old contents of the packet is used so that the new packet is
   D = (y'',e). Note that this will use a new packet sequence number,
   since the packet number was increased in step 2.
6. The slave receives the tail y'' of the Y log event, concatenates
   this with x' (which it already received), and writes the event
   (x',y'') it to the relay log since it hasn't noticed anything is
   amiss.
7. It then tries to read more bytes, which is either e (if the length
   given for X just happened to match the length given for Y, or just
   plain garbage because the slave is out of sync with what is
   actually sent.
8. After a while, the SQL thread tries to execute the event (x',y''),
   which is very likely to be just nonsense.

The problem can be fixed by not resetting net->error after the call of 
mysql_binlog_send, so the error message will not be sent and the connection
will be closed.


sql/sql_parse.cc:
  Do not reset net->error, if net->error == 2, we should not try to use the connection again

and so that it works correctly on Windows.


mysql-test/r/mysqlcheck.result:
  Flush tables before monkeying around with underlying MyISAM data files
mysql-test/t/mysqlcheck.test:
  Fix the test case for bug #25347 so that it actually does test the behavior.
  Also, this makes it work on Windows by ensuring that mysqld doesn't hold the
  underlying MyISAM files open while we try to corrupt them on disk.
  
  Flush tables before monkeying around with underlying MyISAM data files;
  --use-frm, so that mysqlcheck will succeed.

mysql-test/t/mysqlcheck.test:
  Use --remove_file and --write_file instead of --exec rm and --exec touch.

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50


sql/sql_select.cc:
  Auto merged

The problem is when create/rename/drop users, the statement was logged regardless of error, even if no data has been changed, the statement was logged.

After this patch, create/rename/drop users don't write the binlog if the statement makes no changes, if the statement does make any changes, log the statement with possible error code.

This patch is based on the patch for BUG#29749, which is not pushed


sql/sql_acl.cc:
  when create/rename/drop users, don't write the binlog if the statement make no changes
mysql-test/r/rpl_user.result:
  New BitKeeper file ``mysql-test/r/rpl_user.result''
mysql-test/t/rpl_user.test:
  New BitKeeper file ``mysql-test/t/rpl_user.test''

into  quad.:/mnt/raid/alik/MySQL/devel/5.0-rt-merged-5.0

into  lambda.hsd1.co.comcast.net.:/home/malff/TREE/mysql-5.0-33618


mysql-test/t/sp.test:
  Auto merged
sql/sp_head.cc:
  Auto merged
sql/sql_yacc.yy:
  Auto merged

Bug 33983 (Stored Procedures: wrong end <label> syntax is accepted)

The server used to crash when REPEAT or another control instruction
was used in conjunction with labels and a LEAVE instruction.

The crash was caused by a missing "pop" of handlers or cursors in the
code representing the stored program. When executing the code in a loop,
this missing "pop" would result in a stack overflow, corrupting memory.

Code generation has been fixed to produce the missing h_pop/c_pop
instructions.

Also, the logic checking that labels at the beginning and the end of a
statement are matched was incorrect, causing Bug 33983.
End labels, when used, must match the label used at the beginning of a block.


mysql-test/r/sp-code.result:
  Bug#33618 (Crash in sp_rcontext)
mysql-test/r/sp-error.result:
  Bug 33983 (Stored Procedures: wrong end <label> syntax is accepted)
mysql-test/r/sp.result:
  Bug#33618 (Crash in sp_rcontext)
mysql-test/t/sp-code.test:
  Bug#33618 (Crash in sp_rcontext)
mysql-test/t/sp-error.test:
  Bug 33983 (Stored Procedures: wrong end <label> syntax is accepted)
mysql-test/t/sp.test:
  Bug#33618 (Crash in sp_rcontext)
sql/sp_head.cc:
  Bug#33618 (Crash in sp_rcontext)
sql/sp_head.h:
  Bug#33618 (Crash in sp_rcontext)
sql/sp_rcontext.cc:
  Bug#33618 (Crash in sp_rcontext)
sql/sp_rcontext.h:
  Bug#33618 (Crash in sp_rcontext)
sql/sql_yacc.yy:
  Bug#33618 (Crash in sp_rcontext)

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50


sql/item_timefunc.cc:
  Auto merged
sql/set_var.cc:
  Auto merged
sql/sql_select.cc:
  Auto merged

Bug#25347: mysqlcheck -A -r doesn't repair table marked as crashed

mysqlcheck tests nullness of the engine type to know whether the
"table" is a view or not.  That also falsely catches tables that 
are severly damaged.

Instead, use SHOW FULL TABLES to test whether a "table" is a view
or not.

(Don't add new function.  Instead, get original data a smarter way.)

Make it safe for use against databases before when views appeared.


client/mysqlcheck.c:
  Use SHOW FULL TABLES to test better whether a name in the table
  list is one of a view.  Checking that the engine is NULL is 
  insufficient.
  
  Implemented suggestion from jimw that involved removing most of 
  original patch and getting data a better way
mysql-test/r/mysqlcheck.result:
  Verify that tables that have NULL/unreadable engine types are 
  processed and not interpreted as views.
mysql-test/t/mysqlcheck.test:
  Verify that tables that have NULL/unreadable engine types are 
  processed and not interpreted as views.

Patch by Kasper Dupont.  No CLA required for this size of patch.

"resolveip" program produces incorrect result if given a hostname
starting with a digit.  Someone seems to have thought that names 
can not have digits at the beginning.

Instead, use the resolver library to work out the rules of hostnames, 
as it will undoubtedly be better at it than we are.


configure.in:
  See if we need to a library for address lookups.
extra/resolveip.c:
  Don't use silly heuristic to know whether a string is a dotted
  quad.  Instead, pass the whole thing into the resolver and let
  its smarts do all the work.

into  zippy.cornsilk.net:/home/cmiller/work/mysql/mysql-5.0-maint


include/my_sys.h:
  Auto merged
myisam/ft_boolean_search.c:
  Auto merged
myisam/sort.c:
  Auto merged
mysql-test/mysql-test-run.pl:
  Auto merged
mysql-test/r/ctype_ucs.result:
  Auto merged
mysql-test/r/func_misc.result:
  Auto merged
mysql-test/t/ctype_ucs.test:
  Auto merged
mysql-test/t/func_misc.test:
  Auto merged
sql/ha_myisam.cc:
  Auto merged
sql/item_cmpfunc.cc:
  Auto merged
sql/item_cmpfunc.h:
  Auto merged
sql/item_strfunc.h:
  Auto merged
sql/item_timefunc.cc:
  Auto merged
sql/opt_range.cc:
  Auto merged
sql/set_var.cc:
  Auto merged
sql/set_var.h:
  Auto merged
sql/sql_acl.cc:
  Auto merged
sql/sql_select.cc:
  Auto merged
sql/sql_table.cc:
  Auto merged

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50


sql/set_var.cc:
  Auto merged

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/41

of cleanups in the test case for bug33794.

into  ibm.:/home/alik/Documents/MySQL/devel/5.0-rt-merged-5.0

into  lamia.dupka:/home/mhansson/my50-bug33143-again-pushee

The problem occurred when one had a subquery that had an equality X=Y where 
Y referred to a named select list expression from the parent select. MySQL 
crashed when trying to use the X=Y equality for ref-based access. 

Fixed by allowing non-Item_field items in the described case.


mysql-test/r/subselect.result:
  BUG#33794 "MySQL crashes executing specific query"
  - Testcase
mysql-test/t/subselect.test:
  BUG#33794 "MySQL crashes executing specific query"
  - Testcase
sql/sql_select.cc:
  BUG#33794 "MySQL crashes executing specific query"
  get_store_key() assumed that if it got a reference
    t.key=Item_outer_ref(Item_direct_ref(x)) 
  then x was an Item_field object, which is not the case when one refers to a
  named select list expression out ot subquery.

into  linux-st28.site:/home/martin/mysql/src/bug33143/my50-bug33143-again-pushee


sql/item_func.cc:
  Auto merged
mysql-test/r/type_decimal.result:
  Bug#33143: Manual merge
mysql-test/t/type_decimal.test:
  Bug#33143: Manual merge

The ROUND(X, D) function would change the Item::decimals field during
execution to achieve the effect of a dynamic number of decimal digits.
This caused a series of bugs:
Bug #30617:Round() function not working under some circumstances in InnoDB
Bug #33402:ROUND with decimal and non-constant cannot round to 0 decimal places
Bug #30889:filesort and order by with float/numeric crashes server
Fixed by never changing the number of shown digits for DECIMAL when
used with a nonconstant number of decimal digits.


mysql-test/r/type_decimal.result:
  Bug#33143: Test result
mysql-test/t/type_decimal.test:
  Bug#33143: Test case
sql/item_func.cc:
  Bug#33143: 
  - Moved the DECIMAL_MAX_SCALE limitation to fix_length_and_dec.
  - Removed resetting of Item::decimals field.
  - set the frac field of the output value to current scale.
strings/decimal.c:
  Bug#33143: It is necessary to set all digits in the buffer following the 
  rounded one to zero, as they may now be displayed.

into  lamia.dupka:/home/mhansson/my50-bug31797-pushee

into  linux-st28.site:/home/martin/mysql/src/bug31797/my50-bug31797-pushee


sql/item.cc:
  Auto merged
mysql-test/r/group_by.result:
  Bug#31797: Manual merge
mysql-test/t/group_by.test:
  Bug#31797: Manual merge

The name resolution for correlated subqueries and HAVING clauses
failed to distinguish which of two was being performed when there 
was a reference to an outer aliased field.
Fixed by adding the condition that HAVING clause name resulotion
is being performed.


mysql-test/r/group_by.result:
  Bug#31797: Test result
mysql-test/t/group_by.test:
  Bug#31797: Test case
sql/item.cc:
  Bug#31797: 
  Corrected function comment.
  The fix, raising the error is restricted to HAVING name resolution.