have the same path as in source rpms, don't build them differently

Part3: MDEV-18156 Assertion `0' failed or `btr_validate_index(index, 0, false)' in row_upd_sec_index_entry or error code 126: Index is corrupted upon DELETE with PAD_CHAR_TO_FULL_LENGTH

Don't break compatibility in GA releases.
Warn the user, but don't refuse to create a table until 10.5

With cmake -DWITH_INNODB_AHI=OFF -DCMAKE_BUILD_TYPE=RelWithDebInfo
the variable 'i' in fseg_free_extent() was declared but not used.

The test fails because it reuses mysqltest perl code to copy directory
tree, and this code contains Windows-specific piece which outputs some
diagnostic information.

The patch introduces new parameter for that Windows-specific perl code to
have the ability to suppress diagnostic output on the corresponding
mysqltest perl module initialization.

Make the test stable: after DROP TABLE, make sure the compaction is
run and finishes.

If we don't do this, the post-drop compaction may run during the next
testcase. It will cause a record from the next testcase to be compacted
away when the test logic doesn't expect it and the test will fail

this is not ideal and needs to be fixed eventually,
but it's consistent over all forms of INSERT.

MDEV-20403 Assertion `0' or Assertion `btr_validate_index(index, 0)' failed in row_upd_sec_index_entry or error code 126: Index is corrupted upon UPDATE with TIMESTAMP..ON UPDATE

remove a special treatment of a bare DEFAULT keyword that made it
behave inconsistently and differently from DEFAULT(column).
Now all forms of the explicit assignment of a default column value
behave identically, and all count as an explicitly assigned value
(for the purpose of ON UPDATE NOW).

followup for c7c481f4

Fix the test case.

MDEV-5817 query cache bug (returning inconsistent/old result
set) with aria table parallel inserts, row format = page

The problem is that for transactional aria tables
(row_type=PAGE and transactional=1), maria_lock_database()
didn't flush the state or the query cache.
Not flushing the state is correct for transactional tables as
this is done by checkpoint, but not flushing the query cache
was wrong and could cause concurrent SELECT queries to not
be deleted from the cache.

Fixed by introducing a flush of the query cache as part of commit, if the table has changed.
t for transactional aria tables (row_type=PAGE and transactional=1), maria_lock_table() didn't flush their state or the query cache.

Backport the applicable part of Sergey Vojtovich's commit
0ca2ea1a from MariaDB Server 10.3.

trx reference counter was updated under mutex and read without any
protection. This is both slow and unsafe. Use atomic operations for
reference counter accesses.

MySQL 5.7.9 (and MariaDB 10.2.2) introduced a race condition
between InnoDB transaction commit and the conversion of implicit
locks into explicit ones.

The assertion failure can be triggered with a test that runs
3 concurrent single-statement transactions in a loop on a simple
table:

CREATE TABLE t (a INT PRIMARY KEY) ENGINE=InnoDB;
thread1: INSERT INTO t SET a=1;
thread2: DELETE FROM t;
thread3: SELECT * FROM t FOR UPDATE; -- or DELETE FROM t;

The failure scenarios are like the following:
(1) The INSERT statement is being committed, waiting for lock_sys->mutex.
(2) At the time of the failure, both the DELETE and SELECT transactions
are active but have not logged any changes yet.
(3) The transaction where the !other_lock assertion fails started
lock_rec_convert_impl_to_expl().
(4) After this point, the commit of the INSERT removed the transaction from
trx_sys->rw_trx_set, in trx_erase_lists().
(5) The other transaction consulted trx_sys->rw_trx_set and determined
that there is no implicit lock. Hence, it grabbed the lock.
(6) The !other_lock assertion fails in lock_rec_add_to_queue()
for the lock_rec_convert_impl_to_expl(), because the lock was 'stolen'.
This assertion failure looks genuine, because the INSERT transaction
is still active (trx->state=TRX_STATE_ACTIVE).

The problematic step (4) was introduced in
mysql/mysql-server@e27e0e0bb75b4d35e87059816f1cc370c09890ad
which fixed something related to MVCC (covered by the test
innodb.innodb-read-view). Basically, it reintroduced an error
that had been mentioned in an earlier commit
mysql/mysql-server@a17be6963fc0d9210fa0642d3985b7219cdaf0c5:
"The active transaction was removed from trx_sys->rw_trx_set prematurely."

Our fix goes along the following lines:

(a) Implicit locks will released by assigning
trx->state=TRX_STATE_COMMITTED_IN_MEMORY as the first step.
This transition will no longer be protected by lock_sys_t::mutex,
only by trx->mutex. This idea is by Sergey Vojtovich.
(b) We detach the transaction from trx_sys before starting to release
explicit locks.
(c) All callers of trx_rw_is_active() and trx_rw_is_active_low() must
recheck trx->state after acquiring trx->mutex.
(d) Before releasing any explicit locks, we will ensure that any activity
by other threads to convert implicit locks into explicit will have ceased,
by checking !trx_is_referenced(trx). There was a glitch
in this check when it was part of lock_trx_release_locks(); at the end
we would release trx->mutex and acquire lock_sys->mutex and trx->mutex,
and fail to recheck (trx_is_referenced() is protected by trx_t::mutex).
(e) Explicit locks can be released in batches (LOCK_RELEASE_INTERVAL=1000)
just like we did before.

trx_t::state: Document that the transition to COMMITTED is only
protected by trx_t::mutex, no longer by lock_sys_t::mutex.

trx_rw_is_active_low(), trx_rw_is_active(): Document that the transaction
state should be rechecked after acquiring trx_t::mutex.

trx_t::commit_state(): New function to change a transaction to committed
state, to release implicit locks.

trx_t::release_locks(): New function to release the explicit locks
after commit_state().

lock_trx_release_locks(): Move much of the logic to the caller
(which must invoke trx_t::commit_state() and trx_t::release_locks()
as needed), and assert that the transaction will have locks.

trx_get_trx_by_xid(): Make the parameter a pointer to const.

lock_rec_other_trx_holds_expl(): Recheck trx->state after acquiring
trx->mutex, and avoid a redundant lookup of the transaction.

lock_rec_queue_validate(): Recheck impl_trx->state while holding
impl_trx->mutex.

row_vers_impl_x_locked(), row_vers_impl_x_locked_low():
Document that the transaction state must be rechecked after
trx_mutex_enter().

trx_free_prepared(): Adjust for the changes to lock_trx_release_locks().

This is a backport of 900b0790
from MariaDB Server 10.3.

We were missing a test that would exercise trx_free_prepared()
with innodb_fast_shutdown=0. Add a test.

Note: if shutdown hangs due to the XA PREPARE transactions,
in MariaDB 10.2 the test would unfortunately pass, but take
2*60 seconds longer, because of two shutdown_server statements
timing out after 60 seconds. Starting with MariaDB 10.3, the
hung server would be killed with SIGABRT, and the test could
fail thanks to a backtrace message.

MDEV-20403 Assertion `0' or Assertion `btr_validate_index(index, 0)' failed in row_upd_sec_index_entry or error code 126: Index is corrupted upon UPDATE with TIMESTAMP..ON UPDATE

Three issues here:
* ON UPDATE DEFAULT NOW columns were updated after generated columns
  were computed - this broke indexed virtual columns
* ON UPDATE DEFAULT NOW columns were updated after BEFORE triggers,
  so triggers didn't see the correct NEW value
* in case of a multi-update generated columns were also updated
  after BEFORE triggers

on UPDATE, compare_record() was comparing all columns that are marked
for writing. But generated columns that are written to the table are
always deterministic and cannot change unless normal non-generated
columns were changed. So it's enough to compare only non-generated
columns that were explicitly assigned values in the SET clause.

* remove one level of virtual functions
* remove redundant checks
* remove an if() as the value is always known at compilation time

don't pretend that "DEFAULT expr" and "ON UPDATE DEFAULT NOW"
are "basically the same thing"

Part2: MDEV-18156 Assertion `0' failed or `btr_validate_index(index, 0, false)' in row_upd_sec_index_entry or error code 126: Index is corrupted upon DELETE with PAD_CHAR_TO_FULL_LENGTH

This patch allows the server to open old tables that have
"bad" generated columns (i.e. indexed virtual generated columns,
persistent generated columns) that depend on sql_mode,
for general things like SELECT, INSERT, DROP, etc.
Warning are issued in such cases.

Only these commands are now disallowed and return an error:
- CREATE TABLE introducing a "bad" generated column
- ALTER TABLE introducing a "bad" generated column
- CREATE INDEX introdicing a "bad" generated column
  (i.e. adding an index on a virtual generated column
   that depends on sql_mode).

Note, these commands are allowed:
- ALTER TABLE removing a "bad" generate column
- ALTER TABLE removing an index from a "bad" virtual generated column
- DROP INDEX removing an index from a "bad" virtual generated column
but only if the table does not have any "bad" columns as a result.

MDEV-18156 Assertion `0' failed or `btr_validate_index(index, 0, false)' in row_upd_sec_index_entry or error code 126: Index is corrupted upon DELETE with PAD_CHAR_TO_FULL_LENGTH

This change takes into account a column's GENERATED ALWAYS AS
expression dependcy on sql_mode's PAD_CHAR_TO_FULL_LENGTH and
NO_UNSIGNED_SUBTRACTION flags.

Indexed virtual columns as well as persistent generated columns are
now not allowed to have such dependencies to avoid inconsistent data
or index files on sql_mode changes.
So an error is now returned in cases like this:

  CREATE OR REPLACE TABLE t1
  (
    a CHAR(5),
    v VARCHAR(5) AS (a) PERSISTENT -- CHAR->VARCHAR or CHAR->TEXT = ERROR
  );

Functions RPAD() and RTRIM() can now remove dependency on
PAD_CHAR_TO_FULL_LENGTH. So this can be used instead:

  CREATE OR REPLACE TABLE t1
  (
    a CHAR(5),
    v VARCHAR(5) AS (RTRIM(a)) PERSISTENT
  );

Note, unlike CHAR->VARCHAR and CHAR->TEXT this still works,
not RPAD(a) is needed:

  CREATE OR REPLACE TABLE t1
  (
    a CHAR(5),
    v CHAR(5) AS (a) PERSISTENT -- CHAR->CHAR is OK
  );

More sql_mode flags may affect values of generated columns.
They will be addressed separately.

See comments in sql_mode.h for implementation details.

This allows one to run the test suite even if any of the following
options are changed:
- character-set-server
- collation-server
- join-cache-level
- log-basename
- max-allowed-packet
- optimizer-switch
- query-cache-size and query-cache-type
- skip-name-resolve
- table-definition-cache
- table-open-cache
- Some innodb options
etc

Changes:
- Don't print out the value of system variables as one can't depend on
  them to being constants.
- Don't set global variables to 'default' as the default may not
  be the same as the test was started with if there was an additional
  option file. Instead save original value and reset it at end of test.
- Test that depends on the latin1 character set should include
  default_charset.inc or set the character set to latin1
- Test that depends on the original optimizer switch, should include
  default_optimizer_switch.inc
- Test that depends on the value of a specific system variable should
  set it in the test (like optimizer_use_condition_selectivity)
- Split subselect3.test into subselect3.test and subselect3.inc to
  make it easier to set and reset system variables.
- Added .opt files for test that required specfic options that could
  be changed by external configuration files.
- Fixed result files in rockdsb & tokudb that had not been updated for
  a while.

This was done to be able to get any information why the embedded server
doesn't start.

These was part of an incomplete old merge from MySQL 5.6

Merge the changes to include/index_merge*inc from the upstream. The changes
add this command in many places:

 +if ($engine_type == RocksDB)
 +{
 +    set global rocksdb_force_flush_memtable_now=1;
 +}

also add it in one more place to make the test truly stable.

Changes of PAGE_MAX_TRX_ID must be redo-logged for correctness.
That was fixed in the InnoDB Plugin for MySQL 5.1 already.

Improved handling of subdirectories in the xtrabackup-v2 SST scripts (similar to MDEV-18863) for more predictable test results (related to xtrabackup-v2 SST)

MDEV-16932: ASAN heap-use-after-free in my_charlen_utf8 / my_well_formed_char_length_utf8 on 2nd execution of SP with ALTER trying to add bad CHECK

Make automatic name generation during execution (not prepare).

Check result of memory allocation operation.

Revert part of fa2a74e0.

trx_reference(): Remove, and merge the relevant part to the only caller
trx_rw_is_active(). If the statements trx = NULL; were ever executed,
the function would have dereferenced a NULL pointer and crashed in
trx_mutex_exit(trx). Hence, those statements must have been unreachable,
and they can be replaced with debug assertions.

trx_rw_is_active(): Avoid unnecessary acquisition and release of trx->mutex
when do_ref_count=false.

lock_trx_release_locks(): Do not reset trx->id=0. Had the statement been
necessary, we would have experienced crashes in trx_reference().