Now that FIL_TYPE_LOG no longer exists, let us remove some redundant
comparisons of fil_space_t::purpose.

fil_flush_low(): Do not distinguish FIL_TYPE_TEMPORARY.

fil_space_get_space(): Assume that space->purpose is valid.

The merge commit 68fe5f53 missed this.

page_set_autoinc(): Check if any change would take place,
and omit the mtr_t::OPT parameter. This should avoid
unnecessarily redo log writes for ROW_FORMAT=COMPRESSED pages.

The merge a8ed0f77
was accidentally a null-merge.

MDEV-18046: Assortment of crashes, assertion failures and ASAN errors in mysql_show_binlog_events

MDEV-18046: Assortment of crashes, assertion failures and ASAN errors in mysql_show_binlog_events

Problem:
========
SHOW BINLOG EVENTS FROM <pos> reports following assert when ASAN is enabled.

uint32 binlog_get_uncompress_len(const char*):
  Assertion `(buf[0] & 0xe0) == 0x80' failed

Fix:
===
**Part11: Converted debug assert to error handler code**

Problem:
========
SHOW BINLOG EVENTS FROM <pos> reports following ASAN error.

AddressSanitizer: heap-buffer-overflow on address
READ of size 1 at 0x60e00009cf71 thread T28
#0 0x55e37e034ae2 in net_field_length

Fix:
===
**Part10: Avoid reading out of buffer**

Problem:
========
SHOW BINLOG EVENTS FROM <pos> reports following assert when ASAN is enabled.

Query_log_event::Query_log_event(const char*, uint,
    const Format_description_log_event*, Log_event_type):
  Assertion `(pos) + (6) <= (end)' failed

Fix:
===
**Part9: Removed additional DBUG_ASSERT**

Problem:
========
SHOW BINLOG EVENTS FROM <pos> reports following ASAN error

AddressSanitizer: SEGV on unknown address
The signal is caused by a READ memory access.
User_var_log_event::User_var_log_event(char const*, unsigned int,
    Format_description_log_event const*)

Implemented part of upstream patch.
commit: mysql/mysql-server@a3a497ccf7ecacc900551fb1e47ea4078b45c351

Fix:
===
**Part8: added checks to avoid reading out of buffer limits**

Problem:
========
SHOW BINLOG EVENTS FROM <pos> reports following ASAN error
"heap-buffer-overflow on address" and some times it asserts.

Table_map_log_event::Table_map_log_event(const char*, uint,
    const Format_description_log_event*)
Assertion `m_field_metadata_size <= (m_colcnt * 2)' failed.

Fix:
===
**Part7: Avoid reading out of buffer**


Converted debug assert to error handler code.

Problem:
========
SHOW BINLOG EVENTS FROM <pos> reports following ASAN error

AddressSanitizer: heap-buffer-overflow on address 0x60400002acb8
Load_log_event::copy_log_event(char const*, unsigned long, int,
    Format_description_log_event const*)

Fix:
===
**Part6: Moved the event_len validation to the begin of copy_log_event function**

Problem:
========
SHOW BINLOG EVENTS FROM <pos> reports following ASAN error

AddressSanitizer: heap-buffer-overflow on address
String::append(char const*, unsigned int)
Query_log_event::pack_info(Protocol*)

Fix:
===
**Part5: Added check to catch buffer overflow**

Problem:
========
SHOW BINLOG EVENTS FROM <pos> reports following ASAN error

heap-buffer-overflow within "my_strndup" in Rotate_log_event

my_strndup /mysys/my_malloc.c:254
Rotate_log_event::Rotate_log_event(char const*, unsigned int,
    Format_description_log_event const*)

Fix:
===
**Part4: Improved the check for event_len validation**

Problem:
========
SHOW BINLOG EVENTS FROM <pos> reports following crash when ASAN is enabled.

SEGV on unknown address
in inline_mysql_mutex_destroy
in my_bitmap_free
in Update_rows_log_event::~Update_rows_log_event()

Fix:
===
**Part3: Initialize m_cols_ai.bitmap to NULL**

Problem:
========
SHOW BINLOG EVENTS FROM <pos> reports following assert when ASAN is enabled.

Rows_log_event::Rows_log_event(const char*, uint,
    const Format_description_log_event*):
Assertion `var_header_len >= 2'

Implemented part of upstream patch.
commit: mysql/mysql-server@a3a497ccf7ecacc900551fb1e47ea4078b45c351

Fix:
===
**Part2: Avoid reading out of buffer limits**

Problem:
========
SHOW BINLOG EVENTS FROM <pos> causes a variety of failures, some of which are
listed below. It is not a race condition issue, but there is some
non-determinism in it.

Analysis:
========
"show binlog events from <pos>" code considers the user given position as a
valid event start position. The code starts reading data from this event start
position onwards and tries to map it to a set of known events. Each event has
a specific event structure and asserts have been added to ensure that read
event data satisfies the event specific requirements. When a random position
is supplied to "show binlog events command" the event structure specific
checks will fail and they result in assert.

Fix:
====
The fix is split into different parts. Each part addresses either an ASAN
issue or an assert/crash.

**Part1: Checksum based position validation when checksum is enabled**


Using checksum validate the very first event read at the user specified
position. If there is a checksum mismatch report an appropriate error for the
invalid event.

INNOBASE_ALTER_NOVALIDATE: Remove the set of operations
INNOBASE_ONLINE_CREATE that was accidentally included in the
definition.

In the merge of 82187a12 to 10.3
(in commit eda71979) the flags
were defined correctly.

This bug was caught by the test innodb_zip.index_large_prefix.

The test encryption.innodb-redo-badkey will by design cause access
to pages that appear corrupted (due to incorrect encryption key).
Let us disable the page dumps by requiring the test to be run on
a debug server. Page dumps on debug builds were already disabled
in MDEV-19766.

- For partition table, tbl_name_len is calculated wrongly. So it leads to
this uninitialised value warnings

By default (innodb_strict_mode=ON), InnoDB attempts to guarantee
at DDL time that any INSERT to the table can succeed.
MDEV-19292 recently revised the "row size too large" check in InnoDB.
The check still is somewhat inaccurate;
that should be addressed in MDEV-20194.

Note: If a table contains multiple long string columns so that each column
is part of a column prefix index, then an UPDATE that attempts to modify
all those columns at once may fail, because the undo log record might
not fit in a single undo log page (of innodb_page_size). In the worst case,
the undo log record would grow by about 3KiB of for each updated column.

The DDL-time check (since the InnoDB Plugin for MySQL 5.1) is optional
in the sense that when the maximum B-tree record size or undo log
record size would be exceeded, the DML operation will fail and the
transaction will be properly rolled back.

create_table_info_t::row_size_is_acceptable(): Add the parameter
'bool strict' so that innodb_strict_mode=ON can be overridden during
TRUNCATE, OPTIMIZE and ALTER TABLE...FORCE (when the storage format
is not changing).

create_table_info_t::create_table(): Perform a sloppy check for
TRUNCATE TABLE (create_fk=false).

prepare_inplace_alter_table_dict(): Perform a sloppy check for
simple operations.

trx_is_strict(): Remove. The function became unused in
commit 98694ab0 (MDEV-20949).

Modify configuration so that all nodes are part of galera cluster
i.e. wsrep_on=ON. Add missing wait conditions.

test changes only.

log_t::files::fdatasync(): syncs only data for every log file

os_file_flush_data()
pfs_os_file_flush_data_func(): syncs only data for a given file

Features:
* STL-like interface
* Fast modification: no branches on insertion or deletion
* Fast iteration: one pointer dereference and one pointer comparison
* Your class can be a part of several lists

Modeled after std::list<T> but currently has fewer methods (not complete yet)

For even more performance it's possible to customize list with templates so
it won't have size counter variable or won't NULLify unlinked node.

How existing lists differ?

No existing lists support STL-like interface.

I_List:
* slower iteration (one more branch on iteration)
* element can't be a part of two lists simultaneously

I_P_List:
* slower modification (branches, except for the fastest push_back() case)
* slower iteration (one more branch on iteration)

UT_LIST_BASE_NODE_T:
* slower modification (branches)

Three UT_LISTs were replaced: two in fil_system_t and one in dyn_buf_t.

We missed this in commit 89633995.