An error occurred fetching the project authors.
- 13 Nov, 2009 1 commit
-
- 03 Nov, 2009 1 commit
-
-
Alfranio Correia authored
Non-transactional updates that take place inside a transaction present problems for logging because they are visible to other clients before the transaction is committed, and they are not rolled back even if the transaction is rolled back. It is not always possible to log correctly in statement format when both transactional and non-transactional tables are used in the same transaction. In the current patch, we ensure that such scenario is completely safe under the ROW and MIXED modes.
-
- 28 Sep, 2009 1 commit
-
-
Tatiana A. Nurnberg authored
"load data" statements were written to the binlog as a mix of the original statement and bits recreated from parse-info. This relied on implementation details and broke with IGNORE_SPACES and versioned comments. We now completely resynthesize the query for LOAD DATA for binlog (which among other things normalizes them somewhat with regard to case, spaces, etc.). We have already parsed the query properly, so we make use of that rather than mix-and-match string literals and parsed items. This should make us safe with regard to versioned comments, even those spanning multiple tokens. Also no longer affected by IGNORE_SPACES.
-
- 26 Aug, 2009 1 commit
-
-
Alfranio Correia authored
binlog Mixing transactional (T) and non-transactional (N) tables on behalf of a transaction may lead to inconsistencies among masters and slaves in STATEMENT mode. The problem stems from the fact that although modifications done to non-transactional tables on behalf of a transaction become immediately visible to other connections they do not immediately get to the binary log and therefore consistency is broken. Although there may be issues in mixing T and M tables in STATEMENT mode, there are safe combinations that clients find useful. In this bug, we fix the following issue. Mixing N and T tables in multi-level (e.g. a statement that fires a trigger) or multi-table table statements (e.g. update t1, t2...) were not handled correctly. In such cases, it was not possible to distinguish when a T table was updated if the sequence of changes was N and T. In a nutshell, just the flag "modified_non_trans_table" was not enough to reflect that both a N and T tables were changed. To circumvent this issue, we check if an engine is registered in the handler's list and changed something which means that a T table was modified. Check WL 2687 for a full-fledged patch that will make the use of either the MIXED or ROW modes completely safe.
-
- 10 Feb, 2009 1 commit
-
-
Mats Kindahl authored
Post-merge fixes. Changes to some result sets.
-
- 29 Jul, 2008 1 commit
-
-
Sven Sandberg authored
Post-push fix: updated some result files that were affected by the previous fix to this bug.
-
- 03 Mar, 2008 1 commit
-
-
msvensson@pilot.mysql.com authored
Add missing drop view
-
- 27 Feb, 2008 1 commit
-
-
sven@riska.(none) authored
-
- 22 Feb, 2008 1 commit
-
-
kostja@dipika.(none) authored
-
- 19 Feb, 2008 1 commit
-
-
kostja@dipika.(none) authored
a SELECT doesn't cause ROLLBACK of statem". The idea of the fix is to ensure that we always commit the current statement at the end of dispatch_command(). In order to not issue redundant disc syncs, an optimization of the two-phase commit protocol is implemented to bypass the two phase commit if the transaction is read-only.
-
- 01 Feb, 2008 1 commit
-
-
mkindahl@dl145h.mysql.com authored
-
- 29 Jan, 2008 1 commit
-
-
mkindahl@dl145h.mysql.com authored
-
- 22 Jan, 2008 1 commit
-
-
hezx@mail.hezx.com authored
-
- 21 Jan, 2008 1 commit
-
-
hezx@mail.hezx.com authored
-
- 11 Jan, 2008 2 commits
-
-
mkindahl@dl145h.mysql.com authored
-
mkindahl@dl145h.mysql.com authored
-
- 17 Dec, 2007 1 commit
-
-
hezx@hezx.(none) authored
fine The reason of this bug is that when mysqlbinlog dumps a query, the query is written to output with a delimeter appended right after it, if the query string ends with a '--' comment, then the delimeter would be considered as part of the comment, if there are any statements after this query, then it will cause a syntax error. Start a newline before appending delimiter after a query string
-
- 14 Dec, 2007 1 commit
-
-
sven@riska.(none) authored
Now, every transaction (including autocommit transactions) starts with a BEGIN and ends with a COMMIT/ROLLBACK in the binlog. Added a test case, and updated lots of test case result files.
-
- 12 Dec, 2007 1 commit
-
-
msvensson@pilot.mysql.com authored
- dynamic configuration support - safe process - cleanups - create new suite for fedarated
-
- 13 Oct, 2007 1 commit
-
-
aelkin/elkin@koti.dsl.inet.fi authored
-
- 17 Sep, 2007 1 commit
-
-
aelkin@dl145j.mysql.com authored
-
- 16 Sep, 2007 2 commits
-
-
aelkin@dl145j.mysql.com authored
-
aelkin@dl145j.mysql.com authored
-
- 31 Jul, 2007 2 commits
-
-
gkodinov/kgeorge@magare.gmz authored
-
gkodinov/kgeorge@magare.gmz authored
-
- 27 Jun, 2007 1 commit
-
-
msvensson@pilot.(none) authored
- Update mysql-test-run.pl to collect tests from several suites - Group test into suites - Add suite.opt file
-
- 30 Mar, 2007 1 commit
-
-
mats@romeo.(none) authored
- Eliminating some compiler warnings
-
- 29 Mar, 2007 1 commit
-
-
mats@romeo.(none) authored
Adding an event that can be used to denote that an incident occured on the master. The event can be used to denote a gap in the replication stream, but can also be used to denote other incidents. In addition, the injector interface is extended with functions to generate an incident event. The function will also rotate the binary log after generating an incident event to get a fresh binary log.
-
- 20 Mar, 2007 1 commit
-
-
mats@romeo.(none) authored
field does not work Fix to prevent MyISAM from reading data from NULL BLOB. Fix to make record comparison independent of values of unused bits in record. Updating binlog positions in tests.
-
- 14 Dec, 2006 1 commit
-
-
Problem: mysqlbinlog_base64 failed sporadically. Reason: Missing "flush logs" before running $MYSQL_BINLOG, which could start dumping the log file before server has finished writting into it. Fix: - implementing --force-if-open option to "mysqlbinlog" - adding --disable-force-if-open to make $MYSQL_BINLOG fail on non-closed log files, to garantee that nobody will forget "flush logs" in the future. - adding "flush logs" into all affected tests.
-
- 10 Jul, 2006 1 commit
-
-
guilhem@gbichot3.local authored
We now reset the THD members related to auto_increment+binlog in MYSQL_LOG::write(). This is better than in THD::cleanup_after_query(), which was not able to distinguish between SELECT myfunc1(),myfunc2() and INSERT INTO t SELECT myfunc1(),myfunc2() from a binlogging point of view. Rows_log_event::exec_event() now calls lex_start() instead of mysql_init_query() because the latter now does too much (it resets the binlog format).
-
- 04 Jun, 2006 1 commit
-
-
monty@mysql.com authored
This changeset is largely a handler cleanup changeset (WL#3281), but includes fixes and cleanups that was found necessary while testing the handler changes Changes that requires code changes in other code of other storage engines. (Note that all changes are very straightforward and one should find all issues by compiling a --debug build and fixing all compiler errors and all asserts in field.cc while running the test suite), - New optional handler function introduced: reset() This is called after every DML statement to make it easy for a handler to statement specific cleanups. (The only case it's not called is if force the file to be closed) - handler::extra(HA_EXTRA_RESET) is removed. Code that was there before should be moved to handler::reset() - table->read_set contains a bitmap over all columns that are needed in the query. read_row() and similar functions only needs to read these columns - table->write_set contains a bitmap over all columns that will be updated in the query. write_row() and update_row() only needs to update these columns. The above bitmaps should now be up to date in all context (including ALTER TABLE, filesort()). The handler is informed of any changes to the bitmap after fix_fields() by calling the virtual function handler::column_bitmaps_signal(). If the handler does caching of these bitmaps (instead of using table->read_set, table->write_set), it should redo the caching in this code. as the signal() may be sent several times, it's probably best to set a variable in the signal and redo the caching on read_row() / write_row() if the variable was set. - Removed the read_set and write_set bitmap objects from the handler class - Removed all column bit handling functions from the handler class. (Now one instead uses the normal bitmap functions in my_bitmap.c instead of handler dedicated bitmap functions) - field->query_id is removed. One should instead instead check table->read_set and table->write_set if a field is used in the query. - handler::extra(HA_EXTRA_RETRIVE_ALL_COLS) and handler::extra(HA_EXTRA_RETRIEVE_PRIMARY_KEY) are removed. One should now instead use table->read_set to check for which columns to retrieve. - If a handler needs to call Field->val() or Field->store() on columns that are not used in the query, one should install a temporary all-columns-used map while doing so. For this, we provide the following functions: my_bitmap_map *old_map= dbug_tmp_use_all_columns(table, table->read_set); field->val(); dbug_tmp_restore_column_map(table->read_set, old_map); and similar for the write map: my_bitmap_map *old_map= dbug_tmp_use_all_columns(table, table->write_set); field->val(); dbug_tmp_restore_column_map(table->write_set, old_map); If this is not done, you will sooner or later hit a DBUG_ASSERT in the field store() / val() functions. (For not DBUG binaries, the dbug_tmp_restore_column_map() and dbug_tmp_restore_column_map() are inline dummy functions and should be optimized away be the compiler). - If one needs to temporary set the column map for all binaries (and not just to avoid the DBUG_ASSERT() in the Field::store() / Field::val() methods) one should use the functions tmp_use_all_columns() and tmp_restore_column_map() instead of the above dbug_ variants. - All 'status' fields in the handler base class (like records, data_file_length etc) are now stored in a 'stats' struct. This makes it easier to know what status variables are provided by the base handler. This requires some trivial variable names in the extra() function. - New virtual function handler::records(). This is called to optimize COUNT(*) if (handler::table_flags() & HA_HAS_RECORDS()) is true. (stats.records is not supposed to be an exact value. It's only has to be 'reasonable enough' for the optimizer to be able to choose a good optimization path). - Non virtual handler::init() function added for caching of virtual constants from engine. - Removed has_transactions() virtual method. Now one should instead return HA_NO_TRANSACTIONS in table_flags() if the table handler DOES NOT support transactions. - The 'xxxx_create_handler()' function now has a MEM_ROOT_root argument that is to be used with 'new handler_name()' to allocate the handler in the right area. The xxxx_create_handler() function is also responsible for any initialization of the object before returning. For example, one should change: static handler *myisam_create_handler(TABLE_SHARE *table) { return new ha_myisam(table); } -> static handler *myisam_create_handler(TABLE_SHARE *table, MEM_ROOT *mem_root) { return new (mem_root) ha_myisam(table); } - New optional virtual function: use_hidden_primary_key(). This is called in case of an update/delete when (table_flags() and HA_PRIMARY_KEY_REQUIRED_FOR_DELETE) is defined but we don't have a primary key. This allows the handler to take precisions in remembering any hidden primary key to able to update/delete any found row. The default handler marks all columns to be read. - handler::table_flags() now returns a ulonglong (to allow for more flags). - New/changed table_flags() - HA_HAS_RECORDS Set if ::records() is supported - HA_NO_TRANSACTIONS Set if engine doesn't support transactions - HA_PRIMARY_KEY_REQUIRED_FOR_DELETE Set if we should mark all primary key columns for read when reading rows as part of a DELETE statement. If there is no primary key, all columns are marked for read. - HA_PARTIAL_COLUMN_READ Set if engine will not read all columns in some cases (based on table->read_set) - HA_PRIMARY_KEY_ALLOW_RANDOM_ACCESS Renamed to HA_PRIMARY_KEY_REQUIRED_FOR_POSITION. - HA_DUPP_POS Renamed to HA_DUPLICATE_POS - HA_REQUIRES_KEY_COLUMNS_FOR_DELETE Set this if we should mark ALL key columns for read when when reading rows as part of a DELETE statement. In case of an update we will mark all keys for read for which key part changed value. - HA_STATS_RECORDS_IS_EXACT Set this if stats.records is exact. (This saves us some extra records() calls when optimizing COUNT(*)) - Removed table_flags() - HA_NOT_EXACT_COUNT Now one should instead use HA_HAS_RECORDS if handler::records() gives an exact count() and HA_STATS_RECORDS_IS_EXACT if stats.records is exact. - HA_READ_RND_SAME Removed (no one supported this one) - Removed not needed functions ha_retrieve_all_cols() and ha_retrieve_all_pk() - Renamed handler::dupp_pos to handler::dup_pos - Removed not used variable handler::sortkey Upper level handler changes: - ha_reset() now does some overall checks and calls ::reset() - ha_table_flags() added. This is a cached version of table_flags(). The cache is updated on engine creation time and updated on open. MySQL level changes (not obvious from the above): - DBUG_ASSERT() added to check that column usage matches what is set in the column usage bit maps. (This found a LOT of bugs in current column marking code). - In 5.1 before, all used columns was marked in read_set and only updated columns was marked in write_set. Now we only mark columns for which we need a value in read_set. - Column bitmaps are created in open_binary_frm() and open_table_from_share(). (Before this was in table.cc) - handler::table_flags() calls are replaced with handler::ha_table_flags() - For calling field->val() you must have the corresponding bit set in table->read_set. For calling field->store() you must have the corresponding bit set in table->write_set. (There are asserts in all store()/val() functions to catch wrong usage) - thd->set_query_id is renamed to thd->mark_used_columns and instead of setting this to an integer value, this has now the values: MARK_COLUMNS_NONE, MARK_COLUMNS_READ, MARK_COLUMNS_WRITE Changed also all variables named 'set_query_id' to mark_used_columns. - In filesort() we now inform the handler of exactly which columns are needed doing the sort and choosing the rows. - The TABLE_SHARE object has a 'all_set' column bitmap one can use when one needs a column bitmap with all columns set. (This is used for table->use_all_columns() and other places) - The TABLE object has 3 column bitmaps: - def_read_set Default bitmap for columns to be read - def_write_set Default bitmap for columns to be written - tmp_set Can be used as a temporary bitmap when needed. The table object has also two pointer to bitmaps read_set and write_set that the handler should use to find out which columns are used in which way. - count() optimization now calls handler::records() instead of using handler->stats.records (if (table_flags() & HA_HAS_RECORDS) is true). - Added extra argument to Item::walk() to indicate if we should also traverse sub queries. - Added TABLE parameter to cp_buffer_from_ref() - Don't close tables created with CREATE ... SELECT but keep them in the table cache. (Faster usage of newly created tables). New interfaces: - table->clear_column_bitmaps() to initialize the bitmaps for tables at start of new statements. - table->column_bitmaps_set() to set up new column bitmaps and signal the handler about this. - table->column_bitmaps_set_no_signal() for some few cases where we need to setup new column bitmaps but don't signal the handler (as the handler has already been signaled about these before). Used for the momement only in opt_range.cc when doing ROR scans. - table->use_all_columns() to install a bitmap where all columns are marked as use in the read and the write set. - table->default_column_bitmaps() to install the normal read and write column bitmaps, but not signaling the handler about this. This is mainly used when creating TABLE instances. - table->mark_columns_needed_for_delete(), table->mark_columns_needed_for_delete() and table->mark_columns_needed_for_insert() to allow us to put additional columns in column usage maps if handler so requires. (The handler indicates what it neads in handler->table_flags()) - table->prepare_for_position() to allow us to tell handler that it needs to read primary key parts to be able to store them in future table->position() calls. (This replaces the table->file->ha_retrieve_all_pk function) - table->mark_auto_increment_column() to tell handler are going to update columns part of any auto_increment key. - table->mark_columns_used_by_index() to mark all columns that is part of an index. It will also send extra(HA_EXTRA_KEYREAD) to handler to allow it to quickly know that it only needs to read colums that are part of the key. (The handler can also use the column map for detecting this, but simpler/faster handler can just monitor the extra() call). - table->mark_columns_used_by_index_no_reset() to in addition to other columns, also mark all columns that is used by the given key. - table->restore_column_maps_after_mark_index() to restore to default column maps after a call to table->mark_columns_used_by_index(). - New item function register_field_in_read_map(), for marking used columns in table->read_map. Used by filesort() to mark all used columns - Maintain in TABLE->merge_keys set of all keys that are used in query. (Simplices some optimization loops) - Maintain Field->part_of_key_not_clustered which is like Field->part_of_key but the field in the clustered key is not assumed to be part of all index. (used in opt_range.cc for faster loops) - dbug_tmp_use_all_columns(), dbug_tmp_restore_column_map() tmp_use_all_columns() and tmp_restore_column_map() functions to temporally mark all columns as usable. The 'dbug_' version is primarily intended inside a handler when it wants to just call Field:store() & Field::val() functions, but don't need the column maps set for any other usage. (ie:: bitmap_is_set() is never called) - We can't use compare_records() to skip updates for handlers that returns a partial column set and the read_set doesn't cover all columns in the write set. The reason for this is that if we have a column marked only for write we can't in the MySQL level know if the value changed or not. The reason this worked before was that MySQL marked all to be written columns as also to be read. The new 'optimal' bitmaps exposed this 'hidden bug'. - open_table_from_share() does not anymore setup temporary MEM_ROOT object as a thread specific variable for the handler. Instead we send the to-be-used MEMROOT to get_new_handler(). (Simpler, faster code) Bugs fixed: - Column marking was not done correctly in a lot of cases. (ALTER TABLE, when using triggers, auto_increment fields etc) (Could potentially result in wrong values inserted in table handlers relying on that the old column maps or field->set_query_id was correct) Especially when it comes to triggers, there may be cases where the old code would cause lost/wrong values for NDB and/or InnoDB tables. - Split thd->options flag OPTION_STATUS_NO_TRANS_UPDATE to two flags: OPTION_STATUS_NO_TRANS_UPDATE and OPTION_KEEP_LOG. This allowed me to remove some wrong warnings about: "Some non-transactional changed tables couldn't be rolled back" - Fixed handling of INSERT .. SELECT and CREATE ... SELECT that wrongly reset (thd->options & OPTION_STATUS_NO_TRANS_UPDATE) which caused us to loose some warnings about "Some non-transactional changed tables couldn't be rolled back") - Fixed use of uninitialized memory in ha_ndbcluster.cc::delete_table() which could cause delete_table to report random failures. - Fixed core dumps for some tests when running with --debug - Added missing FN_LIBCHAR in mysql_rm_tmp_tables() (This has probably caused us to not properly remove temporary files after crash) - slow_logs was not properly initialized, which could maybe cause extra/lost entries in slow log. - If we get an duplicate row on insert, change column map to read and write all columns while retrying the operation. This is required by the definition of REPLACE and also ensures that fields that are only part of UPDATE are properly handled. This fixed a bug in NDB and REPLACE where REPLACE wrongly copied some column values from the replaced row. - For table handler that doesn't support NULL in keys, we would give an error when creating a primary key with NULL fields, even after the fields has been automaticly converted to NOT NULL. - Creating a primary key on a SPATIAL key, would fail if field was not declared as NOT NULL. Cleanups: - Removed not used condition argument to setup_tables - Removed not needed item function reset_query_id_processor(). - Field->add_index is removed. Now this is instead maintained in (field->flags & FIELD_IN_ADD_INDEX) - Field->fieldnr is removed (use field->field_index instead) - New argument to filesort() to indicate that it should return a set of row pointers (not used columns). This allowed me to remove some references to sql_command in filesort and should also enable us to return column results in some cases where we couldn't before. - Changed column bitmap handling in opt_range.cc to be aligned with TABLE bitmap, which allowed me to use bitmap functions instead of looping over all fields to create some needed bitmaps. (Faster and smaller code) - Broke up found too long lines - Moved some variable declaration at start of function for better code readability. - Removed some not used arguments from functions. (setup_fields(), mysql_prepare_insert_check_table()) - setup_fields() now takes an enum instead of an int for marking columns usage. - For internal temporary tables, use handler::write_row(), handler::delete_row() and handler::update_row() instead of handler::ha_xxxx() for faster execution. - Changed some constants to enum's and define's. - Using separate column read and write sets allows for easier checking of timestamp field was set by statement. - Remove calls to free_io_cache() as this is now done automaticly in ha_reset() - Don't build table->normalized_path as this is now identical to table->path (after bar's fixes to convert filenames) - Fixed some missed DBUG_PRINT(.."%lx") to use "0x%lx" to make it easier to do comparision with the 'convert-dbug-for-diff' tool. Things left to do in 5.1: - We wrongly log failed CREATE TABLE ... SELECT in some cases when using row based logging (as shown by testcase binlog_row_mix_innodb_myisam.result) Mats has promised to look into this. - Test that my fix for CREATE TABLE ... SELECT is indeed correct. (I added several test cases for this, but in this case it's better that someone else also tests this throughly). Lars has promosed to do this.
-
- 12 Feb, 2006 1 commit
-
-
brian@zim.tangent.org authored
This patch removes the remaining TYPE= code from MySQL. It cleans up a number of tests where it was being called still (and failing). Also I cleaned up all of the extra scripts so that they now work.
-
- 22 Dec, 2005 1 commit
-
-
lars@mysql.com authored
This includes both code and test cases.
-