This happens during repair when a temporary table is opened
with HA_OPEN_COPY, which resets 'share->born_transactional', which
the encryption code did not like.

Fixed by resetting just share->now_transactional.

MDEV-22265 Connect string character limit too small for full 64 character InnoDB table-name limit when using ad-hoc Spider server definitions.

Fix length for getting default table name.

MDEV-25530 Error 1451 on slave: Cannot delete or update a parent row: a foreign key constraint fails

after dfb41fdd tables that failed to drop are excluded from the
binlogged DROP TABLE statement. It means that the slave should not
expect any errors when executing DROP TABLE, and the binlog should
report that no error has happened, even if it was.

Do not write error code into the binlogged DROP TABLE,
and remove all code that was needed to compute it.

The assert is no more reproducible in the lastest 10.5-10.6

The patch only adds testcase from MDEV-24382.

            innodb_adaptive_flushing_lwm is hit. (possible regression)

adaptive flushing should kick in if
a. dirty_pct (dirty pages in buffer pool) > innodb_max_dirty_pages_pct_lwm
OR
b. innodb_adaptive_flushing_lwm limit is reached (default to 10%)

both conditions are mutually exclusive and whichever is first to evaluate
true should kick-start the adaptive flushing.

After recent changes to simplify the flushing algorithm logic, (b) got ignored
that introduced the said regression.

row_merge_is_index_usable(): Allow access to any SEQUENCE, even if it was
created after the read view. SQL sequences are no-rollback tables with no
history at all.

Quoting MDEV reporter Daniel Lewart:

Starting MariaDB with default configuration causes the following problems:

    "[Warning] Could not increase number of max_open_files to more than 16384 (request: 32186)"
    silently reduces table_open_cache_instances from 8 (default) to 4

Default Server System Variables:

    extra_max_connections = 1
    max_connections = 151
    table_open_cache = 2000
    table_open_cache_instances = 8
    thread_pool_size = 4

LimitNOFILE=16834 is in the following files:

    support-files/mariadb.service.in
    support-files/mariadb@.service.in

Looking at sql/mysqld.cc lines 3837-3917:
wanted_files= (extra_files + max_connections + extra_max_connections +
tc_size * 2 * tc_instances);
wanted_files+= threadpool_size;

Plugging in the default values:
wanted_files = (30 + 151 + 1 + 2000 * 2 * 8 + 4) = 32186

However, systemd configuration has LimitNOFILE = 16384, which is far smaller.

I suggest increasing LimitNOFILE to 32768.

This is a backport of
commit fd9ca2a7 (MDEV-23295) and
commit 9a156e1a (MDEV-23345) to 10.3.

An instant ADD/DROP/reorder column could create a dummy table
object with the wrong ROW_FORMAT when innodb_default_row_format
was changed between CREATE TABLE and ALTER TABLE.

prepare_inplace_alter_table_dict(): If we had promised that
ALGORITHM=INPLACE is supported, we must preserve the ROW_FORMAT.

The rest of the changes are related to adding
Alter_inplace_info::inplace_supported to cache the return value of
handler::check_if_supported_inplace_alter().

os_aio_print(): Remove output that should have been removed in
commit 5e62b6a5 (MDEV-16264).

The test was changing variable wsrep_provider dynamically,
but wsrep_provider was recently made read-only.

followup for ce3a2a68

Back port upstream fix

commit 1800b015a1d487330f7b15f2020b887be348a66b
Author: Venkatesh Duggirala <venkatesh.duggirala@oracle.com>
Date:   Fri Sep 8 20:29:22 2017 +0530

Bug#26027024    SLAVE_COMPRESSED_PROTOCOL DOESN'T WORK WITH
SEMI-SYNC REPLICATION IN MYSQL-5.7

Analysis: In mysql-5.6, dump thread (the thread that is created
on Master after Slave requested for a binlog dump) is also used
to receive acknowledgements from the Slave and act on them accordingly.
For performance reasons, a special thread called Ack Receiver thread
is added in mysql-5.7 Semi synchronous replication plugin.
This thread does not have special handling to receive acknowledgements
if Slave has enabled compression in the protocol. Hence Master is
unable to handle any slave if Slave_compressed_protocol is enabled
on it.

Fix: Enable compress flag on the communication channels if the Slave
has Slave_compressed_protocol ON.

(trivial backport to 10.2)
Add a testcase

(trivial backport to 10.2)
The optimizer removes redundant GROUP BY operations. If GROUP BY element
is a subselect, it is "eliminated".

However one must not eliminate the item if it is used both in the select
list and in the GROUP BY, like so:

  select (select ... ) as SUBQ from ... group by SUBQ

Do not eliminate such items.

Add a testcase

The optimizer removes redundant GROUP BY operations. If GROUP BY element
is a subselect, it is "eliminated".

However one must not eliminate the item if it is used both in the select
list and in the GROUP BY, like so:

  select (select ... ) as SUBQ from ... group by SUBQ

Do not eliminate such items.

complemented the fix for MDEV-24823 in 10.2. As it is the only call of
this function in 10.3 the commit also has added the code of the function.

except commit 1288dfff

It is possible that an object that was originally created by
open_purge_table() will remain cached and reused for SQL execution.
Our previous fix wrongly assumed that ha_innobase::open() would
always be called before SQL execution starts. Therefore, we must
invoke dict_stats_init() in ha_innobase::info_low() instead of
only doing it in ha_innobase::open().

Note: Concurrent execution of dict_stats_init() on the same table
is possible, but it also was possible between two calls to
ha_innobase::open(), with no ill effects observed.

This should fix the assertion failure on stat_initialized.
A possibly easy way to reproduce it would have been
to run the server with innodb_force_recovery=2 (disable the purge of
history), update a table so that an indexed virtual column will be
affected, and finally restart the server normally (purge enabled),
to observe a crash when the table is accessed from SQL.

The problem was first observed and this fix verified by
Elena Stepanova. Also Thirunarayanan Balathandayuthapani
repeated the problem.

row_sel_sec_rec_is_for_clust_rec(): If the field in the
clustered index record stored off page, always fetch it,
also when the secondary index field has been built on the
entire column. This was broken ever since the InnoDB Plugin
for MySQL Server 5.1 introduced ROW_FORMAT=DYNAMIC and
ROW_FORMAT=COMPRESSED for InnoDB tables. That code was first
introduced in this tree in
commit 3945d5e5.

For the original ROW_FORMAT=REDUNDANT and the MySQL 5.0.3
ROW_FORMAT=COMPRESSED, there was no problem, because for
those tables we always stored at least a 768-byte prefix of
each column in the clustered index record.

row_sel_sec_rec_is_for_blob(): Allow prefix_len==0 for matching
the full column.

Before FRM is written walk vcol expressions through
check_table_name_processor() and check if field items match (db,
table_name) qualifier.

We cannot do this in check_vcol_func_processor() as there is already
no table name qualifiers in expressions of written and loaded FRM.

Buffer overflow in ib_push_warning() fixed by using vsnprintf().

InnoDB parser was obsoleted by MDEV-16417.

Thanks to Nikita Malyavin for review and suggestion.

It's Oracle libmysqlclient license exception, we no longer include,
build or ship libmysqlclient

Before this patch mergeable derived tables / view used in a multi-table
update / delete were merged before the preparation stage.
When the merge of a derived table / view is performed the on expression
attached to it is fixed and ANDed with the where condition of the select S
containing this derived table / view. It happens after the specification of
the derived table / view has been merged into S. If the ON expression refers
to a non existing field an error is reported and some other mergeable derived
tables / views remain unmerged. It's not a problem if the multi-table
update / delete statement is standalone. Yet if it is used in a stored
procedure the select with incompletely merged derived tables / views may
cause a problem for the second call of the procedure. This does not happen
for select queries using derived tables / views, because in this case their
specifications are merged after the preparation stage at which all ON
expressions are fixed.
This patch makes sure that merging of the derived tables / views used in a
multi-table update / delete statement is performed after the preparation
stage.

Approved by Oleksandr Byelkin <sanja@mariadb.com>

Before this patch mergeable derived tables / view used in a multi-table
update / delete were merged before the preparation stage.
When the merge of a derived table / view is performed the on expression
attached to it is fixed and ANDed with the where condition of the select S
containing this derived table / view. It happens after the specification of
the derived table / view has been merged into S. If the ON expression refers
to a non existing field an error is reported and some other mergeable derived
tables / views remain unmerged. It's not a problem if the multi-table
update / delete statement is standalone. Yet if it is used in a stored
procedure the select with incompletely merged derived tables / views may
cause a problem for the second call of the procedure. This does not happen
for select queries using derived tables / views, because in this case their
specifications are merged after the preparation stage at which all ON
expressions are fixed.
This patch makes sure that merging of the derived tables / views used in a
multi-table update / delete statement is performed after the preparation
stage.

Approved by Oleksandr Byelkin <sanja@mariadb.com>

* MSVC check was lost in a bad merge
* add a comment
* move AIX check where it belongs and where it would still
  allow -Werror, if desired

Fix is to changed message to be [WARNING] for backup

There is new Yukon Standard time Windows timezone.

Also fix the powershell script that generates the Windows locale mapping,
tell powershell to use TLSv1.2 to access the github (on some reason it is
TLS1.1 that powershell is using by default, and it does no work)

This reverts commit e731a283.

A crash occurred during the test stress.ddl_innodb when
fil_delete_tablespace() for DROP TABLE was waiting in
fil_check_pending_operations() and a purge thread for handling
an earlier DROP INDEX was attempting to load the index root page
in btr_free_if_exists() and btr_free_root_check(). The function
buf_page_get_gen() would write out several times
"trying to read...being-dropped tablespace"
before giving up and committing suicide.

It turns out that during any page access in btr_free_if_exists(),
fil_space_t::set_stopping() could have been invoked by
fil_check_pending_operations(), as part of dropping the tablespace.
Preventing this race condition would require extensive changes
to the allocation code or some locking mechanism that would ensure
that we only set the flag if btr_free_if_exists() is not in progress.

Either way, that could be a too risky change in a GA release.
Because MDEV-24589 is not strictly necessary in the 10.5 release
series and it only is a requirement for MDEV-25180 in a later
major release, we will revert the change from 10.5.

Issue:- Since there is no waiting for the actual disconnection of the con_tmp
(which does XA prepare of test1), We can have a issue when test1 is not
prepared and we are calling rollback on test1 , giving XAER_NOTA: Unknown XID
error

Solution:- Wait for the complete disconnection of con_tmp