LOAD DATA AT MASTER.

Revert "BUG#23080148 - BACKPORT BUG 14653594 AND BUG 20683959 TO"

This reverts commit 1d31f5b3090d129382b50b95512f2f79305715a1.
The commit causes replication incompatibility between minor revisions
and based on discussion with Srinivasarao, the patch is reverted.

Wrapper for mysql_config used in multilib installs modified to work as
intended, added more archs (aarch64, ppc64le, s390x, s390, sparc and
sparc64) to lists in fallback mode and use same script for EL and
Fedora.

Thanks to Alexey Kopytov for report and fix.

              700101

ANALYSIS:
=========
To set the time 'start_time' of query in THD, current time
is obtained by calling 'gettimeofday()'. On Solaris
platform, due to some system level issues, time obtained is
invalid i.e. its either greater than 2038 (max signed value
to hold microseconds since 1970) or 1970 (0 microseconds
since 1970). In these cases, validation checks infer that
the 'start_time' is invalid and mysql server initiates the
shutdown process. But the reason for shutdown is not logged.

FIX:
====
We are now logging appropriate message when shutdown is
triggered in the above mentioned scenarios. Now, even if
the initial validation checks infer that the 'start_time'
is invalid, server shutdown is not initiated immediately.
Before initiating the server shutdown, the process of
setting 'start_time' and validating it is reiterated (for
max 5 times). If correct time is obtained in these 5
iterations then server continues to run.

 - Remove use of touch and chmod.
 - Restrict usage of chown to cases where target directory is /var/log.
 - Due to limited feature set in /bin/sh on Solaris, /bin/bash will be
   used on this platform.
 - Give error if directory for UNIX socket file is missing.
 - Privileged user should not log to files owned by different user
   (mysqld will log as before).

Prevent GCC from moving a mach_read_from_4() before we have checked that
we have 4 bytes to read. The pointer may only point to a 1, 2 or 3
bytes in which case the code should not read 4 bytes. This is a
workaround to a GCC bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=77673

Patch submitted by: Laurynas Biveinis <laurynas.biveinis@gmail.com>
RB: 14135
Reviewed by: Pawel Olchawa <pawel.olchawa@oracle.com>

No commit message

              RESTRICTED IN ALL GA RELEASES

Back port of WL#6782 to 5.5 and 5.6. This also includes
back port of Bug#20771331, Bug#20741572 and Bug#20770671.
Bug#24695274 and Bug#24679907 are also handled along with
this.

              RESTRICTED IN ALL GA RELEASES

Back port of WL#6782 to 5.5 and 5.6. This also includes
back port of Bug#20771331, Bug#20741572 and Bug#20770671.
Bug#24695274 and Bug#24679907 are also handled along with
this.

RUNNING FIREWALL

mysqladmin shutdown will try to extract the server's pid file before executing
the actual shutdown command.
It will do that by executing a SHOW VARIABLES query and processing the result.
However if that query fails it print a (somewhat confusing) error mesasage
and will still continue to do the shutdown command.
If that passes then the mysqladmin user will get an error but the shutdown will
still be successful.
This is confusing so the error message text is changed to say that this is a
non-fatal error and execution continues.
No test case added since it'd require a selective query failure device that's
not available in 5.5.

ISSUE: Heap corruption occurs and hence mysql server
       terminates abnormally in String variable destructor
       when ZEROFILL is used for a column.
       Though the abnormal termination is observed in the
       String destructor, heap corruption occurs at earlier
       stage when function Field_num::prepend_zeros() is called.
       This function, prepends zeros to the actual data and
       works on entire field length. Since the allocated memory
       could be less than the field length, heap corruption occurs.
       Later, when String destructor tries to free heap, the server
       terminates abnormally since the heap is corrupt.



SOLUTION: In Field_num::prepend_zeros() function, if allocated memory
          is less than the field length, re-allocate memory enough to
          hold field length size data.

              USING CHARACTER-SET-SERVER=UTF16

This is a backport of Bug#15985752 to mysql-5.5

Post push fix: Solaris 10 /bin/sh don't understand $().

Post push fix: Solaris 10 /bin/sh don't understand $().

                SUBSELECT_UNION_ENGINE::NO_ROWS

This patch is specific for mysql-5.5

ISSUE: When max_join_size is used and union query
       results in evaluation of tuples greater than
       max_join_size, the join object is not created,
       and is set to NULL.
       However, this join object is further dereferenced
       by union logic to determine if query resulted in
       any number of rows being returned.
       Since, the object is NULL, it results in
       program terminating abnormally.

SOLUTION: Added check to verify if join object is created.
          If join object is created, it will be used to
          determine if query resulted in any number of rows.
          Else, when join object is not created, we return
          'false' indicating that there were no rows for the
          query.

[This is the 5.5/5.6 version of the bugfix].

The problem was that it was possible to write log files ending
in .ini/.cnf that later could be parsed as an options file.
This made it possible for users to specify startup options
without the permissions to do so.

This patch fixes the problem by disallowing general query log
and slow query log to be written to files ending in .ini and .cnf.

During REPAIR TABLE of a MyISAM table, a temporary data file (.TMD)
is created. When repair finishes, this file is renamed to the original
.MYD file. The problem was that during this rename, we copied the
stats from the old file to the new file with chmod/chown. If a user
managed to replace the temporary file before chmod/chown was executed,
it was possible to get an arbitrary file with the privileges of the
mysql user.

This patch fixes the problem by not copying stats from the old
file to the new file. This is not needed as the new file was
created with the correct stats. This fix only changes server
behavior - external utilities such as myisamchk still does
chmod/chown.

No test case provided since the problem involves synchronization
with file system operations.

Argument to malloc-lib must be included in restricted list of
directories, symlink guards added, and mysqld and mysqld-version
options restricted to command line only. Don't redirect errors to
stderr.

              IS USED IN CREATE TABLE

The problem was that using a very long subpartition name could
lead to the server exiting abnormally.

This patch fixes the problem by reporting ER_TOO_LONG_IDENT
if a name with more than 64 characters are used as partition
and subpartition name.

[This is the 5.5/5.6 version of the bugfix].

The problem was that it was possible to write log files ending
in .ini/.cnf that later could be parsed as an options file.
This made it possible for users to specify startup options
without the permissions to do so.

This patch fixes the problem by disallowing general query log
and slow query log to be written to files ending in .ini and .cnf.

During REPAIR TABLE of a MyISAM table, a temporary data file (.TMD)
is created. When repair finishes, this file is renamed to the original
.MYD file. The problem was that during this rename, we copied the
stats from the old file to the new file with chmod/chown. If a user
managed to replace the temporary file before chmod/chown was executed,
it was possible to get an arbitrary file with the privileges of the
mysql user.

This patch fixes the problem by not copying stats from the old
file to the new file. This is not needed as the new file was
created with the correct stats. This fix only changes server
behavior - external utilities such as myisamchk still does
chmod/chown.

No test case provided since the problem involves synchronization
with file system operations.

Argument to malloc-lib must be included in restricted list of
directories, symlink guards added, and mysqld and mysqld-version
options restricted to command line only. Don't redirect errors to
stderr.

No commit message

Problem:
When build_equal_items_for_cond gets called for a big query
recursively, the specified thread_stack_size exceeds. But
optimizer does not handle this condition. As a result, server
exits.

Solution:
Check if we exceed specified stack size and if yes exit
gracefully by throwing an error.

It happens when you are trying to read two or more log files from a
remote server using mysqlbinlog utility.

The reason for this is no matching mysql_close() that concludes the
life time of 'mysql' struct describing connection to the server.
This happens when mysqlbinlog is invoked with connecting to the server
and requesting more than one binlog file. In such case
dump_remote_log_entries() keeps calling safe_connect() per eachfile,
never caring to invoke mysql_close(). Only the final safe_connect()'s
allocation effect are cleaned by the base code.
That is with 2 files there's one 'mysql' connection descriptor struct
uncleaned/deallocated.

We are backporting the bug 21255763 (pushed in mysql-trunk)
in the earlier version of MySQL starting from 5.5 to 5.7.
which was pushed in mysql-trunk.

Fix:
Invoke mysql_close() just before mysql_init() in safe_connect()
defined in mysqlbinlog.cc. That makes possibly previously used 'mysql' be
reclaimed prior a new one is allocated.

Reverting the patch due to some issues.

ISSUE: Queries with mediumint as column when operated with
long long type of data results in buffer overflow in
store_long function.

The merging rule specified for (MYSQL_TYPE_LONGLONG
MYSQL_TYPE_INT24) is MYSQL_TYPE_LONG. Due to this store_long
function was getting called which resulted in buffer overflow.

SOLUTION:
The correct merging rule for (MYSQL_TYPE_LONGLONG,
MYSQL_TYPE_INT24) should be MYSQL_TYPE_LONGLONG.
So, instead of function store_long, function store_longlong
is called which correctly handles the type MYSQL_TYPE_LONGLONG.

External Bug #23645238 is a duplicate of this issue.

               DERIVED TABLE IN JOIN

ISSUE:
------
This problem occurs under the following conditions:
1) A parameter is used in the select-list of a derived table.
2) The derived table is part of a JOIN.

SOLUTION:
---------
When a derived table is materialized, a temporary table is
created. This temporary table creates a field each for the
items in the select-list of the derived table. This set of
fields is later used to setup the join.

Currently no field is created in the temporary table if a
parameter is used in the select-list.

Create a field for the parameter. By default Item_param's
result type in a prepared statement is set to
STRING_RESULT. This can change during the execute phase
depending on the user variable. But since the execute phase
creates its own temporary table, it will be handled
separately.

This is a backport of the fix for BUG#22392374.

Problem:
In debug builds, there is a chance that an out-of-bounds
read is performed when tables are locked in
LTM_PRELOCKED_UNDER_LOCK_TABLES mode. It can happen because
the debug code uses enum values as index for an array of
mode descriptions, but it only takes into consideration 3
out of 4 of the enum values.

Fix:
This patch fixes it by implementing a getter for the enum which
returns a string representation of the enum,
effectively removing the out-of-bounds read.

Moreover, it also fixes the lock mode descriptions that
would be print out in debug builds.

Commit#ebd24626 obsoleted the THREAD and
THREAD_SAFE_CLIENT preprocessor symbols. This is not removed in the
sql/net_serv.cc thereby the code that retries on EINTR became dead code.
Remove the THREAD_SAFE_CLIENT preprocessor directive form sql/net_serv.cc.
Also check errno for EINTR only if there is an error in preceding read call.

               GET_SERVER_FROM_TABLE_TO_CACHE

Description:- Server received SIG11 in the function,
"get_server_from_table_to_cache()".

Analysis:- Defining a server with a blank name is not
handled properly.

Fix:- Modified "get_server_from_table_to_cache()" to
take care of blank server name.

               FROM I_S

Issue:
------
There is a difference in the field type created when the
following DDLs are used:

1) CREATE TABLE t0 AS SELECT NULL;
2) CREATE TABLE t0 AS SELECT GREATEST(NULL,NULL);

The first statement creates field of type Field_string and
the second one creates a field of type Field_null.

This creates a problem when the query mentioned in this bug
is used. Since the null_ptr is calculated differently for
Field_null.

Solution:
---------
When there is a function returning null in the select list
as mentioned above, the field should be of type
Field_string.

This was fixed in 5.6+ as part of Bug#14021323. This is a
backport to mysql-5.5.

An incorrect comment in innodb_bug54044.test has been
corrected in all versions.