Crash was timeout crash. Add correct waits for connections, wsrep
sync waits and auto increment offset save and restore.

Use wsrep sync wait instead of unnecessary waits and
correct slave setting.

Remove unnecessary sleeps and fix wait_condition to use
wsrep_flow_control_paused i.e. we wait until flow control
pauses a transaction on master.

we had the statistics tables in the FROM list of the select.
The statistics for tables are not read in such cases, so we need
to check this case separately.

Statistics were not read for a table when we had a CREATE TABLE query.
Enforce reading statistics for commands CREATE TABLE, SET and DO.

Problem:
=======
Whel rpl.rpl_row_mysqlbinlog test is executed as shown below it fails with
result content mismatch.

perl mtr rpl_row_mysqlbinlog --mysqld=--binlog-annotate-row-events=1

Analysis:
=========
When row annotations are enabled the actual query is written into the binlog
which helps users to understand the query, even when row based replication is
enabled.

For example: Simple insert in row based replication looks like shown below.

#190402 16:31:27 server id 1  end_log_pos 526 	Annotate_rows:
#Q> insert into t values (10)
#190402 16:31:27 server id 1  end_log_pos 566 	Table_map: `test`.`t` mapped to number 19
# at 566
#190402 16:31:27 server id 1  end_log_pos 600 	Write_rows: table id 19 flags: STMT_END_F

BINLOG '
B0GjXBMBAAAAKAAAADYCAAAAABMAAAAAAAEABHRlc3QAAXQAAQMAAQ==
B0GjXBcBAAAAIgAAAFgCAAAAABMAAAAAAAEAAf/+CgAAAA==
'/*!*/;
# at 600

The test creates some binary log events and redirects them into a SQL file.
Executes RESET MASTER and sources the SQL file back on clean master and verifies
that the data is available. Please refer following steps.

../client/mysqlbinlog ./var/mysqld.1/data/master-bin.000001 > test.sql
../client/mysql -uroot -S./var/tmp/mysqld.1.sock -Dtest  < test.sql
../client/mysqlbinlog ./var/mysqld.1/data/master-bin.000001 -v > row.sql

When the row based replication specific SQL file is sourced once again on master
the newly generated binlog will treat the entire "BASE 64" encoded event as
query and write it into the binary log.

Output from 'row.sql':

#Q> BINLOG '
#Q> B0GjXBMBAAAAKAAAADYCAAAAABMAAAAAAAEABHRlc3QAAXQAAQMAAQ==
#Q> B0GjXBcBAAAAIgAAAFgCAAAAABMAAAAAAAEAAf/+CgAAAA==
#190402 16:31:27 server id 1  end_log_pos 657 	Table_map: `test`.`t` mapped to number 23
# at 657
#190402 16:31:27 server id 1  end_log_pos 691 	Write_rows: table id 23 flags: STMT_END_F

BINLOG '
B0GjXBMBAAAAKAAAAJECAAAAABcAAAAAAAEABHRlc3QAAXQAAQMAAQ==
B0GjXBcBAAAAIgAAALMCAAAAABcAAAAAAAEAAQH+CgAAAA==
### INSERT INTO `test`.`t`
### SET
###   @1=10
'/*!*/;
# at 691


This is expected behaviour as we cannot extract query from BASE 64 encoded
input. This causes more number of binary logs to be generated when the test is
executed with row annotations.

The following lines from test assumes that only two binary logs will contain
entire data.

 --echo --- Test 4 Second Remote test --
---exec $MYSQL_BINLOG --read-from-remote-server --user=root --host=127.0.0.1
	--port=$MASTER_MYPORT master-bin.000001 > $MYSQLTEST_VARDIR/tmp/remote.sql
---exec $MYSQL_BINLOG --read-from-remote-server --user=root --host=127.0.0.1
	--port=$MASTER_MYPORT master-bin.000002 >> $MYSQLTEST_VARDIR/tmp/remote.sql

In a case when row annotations are enabled the data gets spread across four
binary logs. As test uses only the first two binary log files, data available in
other binary logs gets missed. Hence test fails with result content mismatch as
less data is avaialble.

Fix:
====
Use "-to-the-last" option of "mysqlbinlog" tool which will ensure that all the
available binary log specific contents are included in .sql file.

Try to fix the race conditions between
SET GLOBAL innodb_ft_aux_table = ...;
and access to the INFORMATION_SCHEMA tables that depend on
this variable.

innodb_ft_aux_table: Replaces
fts_internal_tbl_name,fts_internal_tbl_name2. Just store the
user-specified parameter as is.

innodb_ft_aux_table_id: The table_id corresponding to
SET GLOBAL innodb_ft_aux_table, or 0 if the table does not exist
or does not contain FULLTEXT INDEX. If the table is renamed later,
the INFORMATION_SCHEMA tables will continue to refer to the table.
If the table is dropped or rebuilt, the INFORMATION_SCHEMA tables
will not find the table.

With SET GLOBAL innodb_optimize_fulltext_only=1
in effect, OPTIMIZE TABLE would output words from the fulltext index
to the server error log, even in non-debug builds.

fts_optimize_words(): Remove the unwanted output.

row_insert_for_mysql(): Correct the grammar error, and
display the table name in both messages.

* Update wrong zip-code

Some places didn't match the previous rules, making the Floor
address wrong.

Additional sed rules:

sed -i -e 's/Place.*Suite .*, Boston/Street, Fifth Floor, Boston/g'
sed -i -e 's/Suite .*, Boston/Fifth Floor, Boston/g'

This commit is based on the work of Michal Schorm, rebased on the
earliest MariaDB version.

Th command line used to generate this diff was:

find ./ -type f \
  -exec sed -i -e 's/Foundation, Inc., 59 Temple Place, Suite 330, Boston, /Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, /g' {} \; \
  -exec sed -i -e 's/Foundation, Inc. 59 Temple Place.* Suite 330, Boston, /Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, /g' {} \; \
  -exec sed -i -e 's/MA.*.....-1307.*USA/MA 02110-1335 USA/g' {} \; \
  -exec sed -i -e 's/Foundation, Inc., 59 Temple/Foundation, Inc., 51 Franklin/g' {} \; \
  -exec sed -i -e 's/Place, Suite 330, Boston, MA.*02111-1307.*USA/Street, Fifth Floor, Boston, MA 02110-1335 USA/g' {} \; \
  -exec sed -i -e 's/MA.*.....-1307/MA 02110-1335/g' {} \;

buf_dblwr_process(): Remove the useless warning that a copy of a page
in the doublewrite buffer is corrupted. We already report an error if a
corrupted page cannot be recovered from the doublewrite buffer.

Note: In MariaDB 10.1, the original bug reported in MDEV-13893 could
still be easily repeatable. In MariaDB 10.2.24, MDEV-12699 should
have reduced the probability considerably.

fts_get_table_name(): Add the parameter bool dict_locked=false.

fts_get_table_name(): Output to a caller-allocated buffer.

fts_get_table_name_prefix(): Use the lower-overhead allocation
ut_malloc() instead of mem_alloc().

This is based on mysql/mysql-server@d1584b9f38ff0bcf609d181db35f74108e022168
in MySQL 5.7.4.

fts_table_t::parent: Remove the redundant field. Refer to
table->name.m_name instead.

fts_update_sync_doc_id(), fts_update_next_doc_id(): Remove
the redundant parameter table_name.

fts_get_table_name_prefix(): Access the dict_table_t::name.
FIXME: Ensure that this access is always covered by
dict_sys->mutex.

fts_state_t, fts_slot_t::state: Remove. Replaced by fts_slot_t::running
and fts_slot_t::table_id as follows.

FTS_STATE_SUSPENDED: Removed (unused).

FTS_STATE_EMPTY: Removed. table_id=0 will denote empty slots.

FTS_STATE_RUNNING: Equivalent to running=true.

FTS_STATE_LOADED, FTS_STATE_DONE: Equivalent to running=false.

fts_slot_t::table: Remove. Tables will be identified by table_id.
After opening a table, we will check fil_table_accessible() before
accessing the data.

fts_optimize_new_table(), fts_optimize_del_table(),
fts_optimize_how_many(), fts_is_sync_needed():
Remove the parameter tables, and use the static variable fts_slots
(which was introduced in MariaDB 10.2) instead.

No functional change.

Call my_timer_init() only once and then reuse it from InnoDB and
perfschema storage engines.

This patch speeds up empty test for me like this:
./mtr -mem innodb.kevg,xtradb  1.21s user 0.84s system 34% cpu 5.999 total
./mtr -mem innodb.kevg,xtradb  1.12s user 0.60s system 31% cpu 5.385 total

The crash happens when writing into log file.
The reason is likely that the call to WriteFile() was missing a valid
parameter for lpNumberOfBytesWritten. This seems only to happen on ancient
version of Windows.

Since the fix to MDEV-16430 in 141bc58a, null pointer was passed
instead of valid pointer.

The fix is to provide a valid lpNumberOfBytesWritten parameter.

A sequel to 9180e866 and 149b7547.

ALTER TABLE ... ADD FOREIGN KEY may crash if parent table is updated
concurrently.

Block FK parent table updates even earlier, before intermediate child
table is created.

Use proper charset info for my_casedn_str() and don't update original
identifiers so that lower_cast_table_names == 2 is honoured.

Fix:
====
1) Combined innodb_ft_result_cache_limit_32.test and
innodb_ft_result_cache_limit_64.test test case in sys_vars suite.

2) Use word_size.inc for combinations of innodb_ft_result_cache_limit test case.

regression after 3db6de33

in RPMs continue creating the $datadir outside of mysql_install_db.
RPMs put the socket in there, so it cannot be chmod 0700.

Test case was not stable. Fixed also galera_parallel_autoinc_manytrx
as it has the same problem.

This reverts commit 8dc670a5.

The symbol sys_timer_info was not being exported correctly,
which caused linking failures on some platforms.

regression after 3db6de33

in RPMs continue creating the $datadir outside of mysql_install_db.
RPMs put the socket in there, so it cannot be chmod 0700.

MONITOR_PENDING_LOG_WRITE
MONITOR_PENDING_CHECKPOINT_WRITE
MONITOR_LOG_IO: read values from log_t members instead of updating own
monitor variables

No functional change.

Call my_timer_init() only once and then reuse it from InnoDB and
perfschema storage engines.

This patch speeds up empty test for me like this:
./mtr -mem innodb.kevg,xtradb  1.21s user 0.84s system 34% cpu 5.999 total
./mtr -mem innodb.kevg,xtradb  1.12s user 0.60s system 31% cpu 5.385 total

Based on pull request https://github.com/MariaDB/server/pull/999
by mkaruza@galeracluster.com