Description: If libmysql is compiled with WITH_SSL=NO,
             --ssl-* are not useful.

Solution: 1. Restricted WITH_SSL to values : bundled | yes | system
          2. Made "bundled" as default value for WITH_SSL. Also,
             not specifying WITH_SSL or even specifying WITH_SSL=no
             will be treated as/converted to WITH_SSL=bundled.
Reviewed-By: Tor Didriksen <tor.didriksen@oracle.com>
Reviewed-By: Georgi Kodinov <georgi.kodinov@oracle.com>
(cherry picked from commit 3eb2058be34d1a21771fe89ff1a0c08f156899bc)

(cherry picked from commit 7df8dc750c26ead87c643f87dccba28a66cf3c9b)

While writing comments if database object names has a new
line character, then next line is considered a command, rather
than a comment.
This patch fixes the way comments are constructed in mysqldump.

(cherry picked from commit 1099f9d17b1c697c2760f86556f5bae7d202b444)

Changed MYSQL_OPT_SSL_MODE to be the same as in 5.6 (ABI compatibility).

(cherry picked from commit 47bb4eb5df1629b5d5e30aebfa9d7a6d74388a5d)

MYSQL_OPT_SSL_MODE option introduced.
It is set in case of --ssl-mode=REQUIRED and permits only SSL connection.

(cherry picked from commit 3b2d28578c526f347f5cfe763681eff365731f99)

Patch for 5.5 and 5.6
Use default runtime libraries on windows, i.e. build with /MD

              SPORADICALLY ON PB2-5.5 FOR LINUX-VALGRIND

Description: Sporadic failure of variables-bug21503595 test
on pb2-5.5 for linux-valgrind platform.

Fix: This is a issue related to libc and not related to
MySQL code. During dlclose few blocks of memory left
unfreed. This is a known issue in libc and needs to be
suppressed.

Fix: Added a valgrind suppression.

Problem: CREATE TABLE using a fully qualified name with INDEX DIR/DATA DIR
option reports an error when the current database is not SET.

check_access() was incorrectly called with NULL as the database
argument in a situation where the database name was not needed for
the particular privilege being checked. This will cause the current
database to be used, or an error to be reported if there is no current
database.

Fix: Call check_access() with any_db as the database argument in this situation.

			  STRING FUNCTION

Fix:
=======
Added code in QUOTE string function to honor max_allowed_packet.

No commit message

In SysV initscripts for RPMS [mysqld] section was ignored for some options.

Fix of Bug#25088048 caused paths to be relative, not absolute, this
proved to be problematic.

Fix is to still ignore current working directory, however switch to
using full path of basedir, which is set to parent directory of bin/
directory where mysqld_safe is located.

References to legacy tool mysql_print_defaults are removed, only
my_print_defaults is used these days.

This will also fix:
  Bug#11745176 (11192) MYSQLD_SAFE ONLY EVALUATES --DEFAULTS-FILE OPTION WHEN IT IS THE FIRST OP
  Bug#23013510 (80866) MYSQLD_SAFE SHOULD NOT SEARCH $MY_BASEDIR_VERSION/VAR AS DATADIR
  Bug#25244898 (84173) MYSQLD_SAFE --NO-DEFAULTS & SILENTLY DOES NOT WORK ANY MORE
  Bug#25261472 (84219) INITSCRIPT ERRORS WHEN LAUCHING MYSQLD_SAFE IN NON DEFAULT BASEDIR
  Bug#25319392 (84263) MYSQL.SERVER (MYSQL SERVER STARTUP SCRIPT) CAN NOT WORK,AND EXPORT SOME ERROR.
  Bug#25319457         MYSQLD_SAFE MIGHT FAIL IF $DATADIR HAS TRAILING /
  Bug#25341981         MYSQLD_SAFE ASSUMES INCORRECT BASEDIR WHEN EXECUTED WITH ABSOLUTE PATH
  Bug#25356221 (84427) MYSQLD_SAFE FAILS TO START WHEN USING A FIFO FOR LOG-ERROR (REGRESSION)
  Bug#25365194 (84447) MYSQLD_SAFE DOESN'T CHECK EXISTENCE OF GIVEN BASEDIR PARAMETER
  Bug#25377815         ERRORS WHILE STARTING MYSQLD_SAFE WITH SYM LINK ENABLED

               MYSQLD_SAFE

DESCRIPTION
===========
Starting a mysql server by running init script:
/etc/init.d/mysqld start

is failing. This is happening after the changes done in
script 'mysqld_safe' as a patch to Bug#24464380.

ANALYSIS
========
Say customer's /etc/my.cnf has following content:

[mysqld_safe]
.
.
ledir  = /mysqld_ledir
mysqld = mysqld_wrapper

Patch to Bug#24464380 prohibits using "mysqld" (and few
other variables) in config file due to privilege reasons.
Since mysqld init scripts internally calls 'mysqld_safe'
script, the existing configuration has started failing.

FIX
===
In the init script, we now pass MYSQLD_OPTS as the first
argument (expected to be read from /etc/sysconfig/mysqld)
to mysqld_safe command. This new variable can have all the
mysqld_safe's special options as a string containing command
line arguments. For example:

MYSQLD_OPTS=" --ledir=/mysqld_ledir --mysqld=my_wrapper "

NOTE TO THE DOCUMENTATION TEAM
==============================
As mentioned above, the prohibited variables have to be
moved from /etc/my.cnf to /etc/sysconfig/mysqld as a string
containing command-line arguments in the form of variable
MYSQLD_OPTS. We can pass mysqld options as well in this new
variable which would be further passed to mysqld process.

This is backport of WL#7195 to MySQL-5.5. In 5.5, we
offload connection authentication from the acceptor
thread to tp worker threads.

Connection authentication happens in the acceptor thread that
accepts the connection for thread pool plugin. Connection authentication
involves exchanging packets with client and disk I/O
which is time consuming. This can cause other client
connections to starve and wait in the queue possibly increasing the
connect latency and decreasing throughput. In the worst case, some
connections could be dropped. n addition, SSL handshakes are quite
expensive and can stall connections in the accept queue.

This patch offloads connection authentication when thread pool
plugin is used for client connection. Each thread group
shall have a queue of connection_context objects, which represents
new connections that need to be processed by thread group threads.
The connection context is composed of THD object & list pointers
for intrusive queue implementation. Whenever a new connection
arrives, connection context object is created and added to the
queue. A new connect handler thread is created or woken up to handle
the authentication task. The worker thread loop is modified to
process connection events on connect handler threads in addition to
checking for query processing events. The initial number of connect
handler threads is one per thread group and it is restricted to
a maximum of 4 threads per thread group.

Post-push fix.
Problem cmake without explicit build type was broken on windows.
Fix: do not test for build type, always extend CMAKE_C[XX]_FLAGS_DEBUG

The combination cmake -DENABLE_DEBUG_SYNC=0 -DWITH_DEBUG=ON fails to build.

Fix: Remove option ENABLE_DEBUG_SYNC.

		MY_THREAD_INIT IN BACKGROUND THREAD

Description:
===========
Add my_thread_init() and my_thread_exit() for background threads which
initializes and frees the st_my_thread_var structure.

Reviewed-by: Jimmy Yang<jimmy.yang@oracle.com>
RB: 15003

               IS STARTING: CONFUSING ERROR

DESCRIPTION
===========
When mysql server processes transactions but has not yet
committed and shuts down abnormally (due to crash, external
killing etc.), a recovery is due from Storage engine side
which takes place the next time mysql server (either
through mysqld or mysqld_safe) is run.

While the 1st server is in mid of recovery, if another
instance of mysqld_safe is made to run, it may result into
2nd instance killing the 1st one after a moment.

ANALYSIS
========
In the "while true" loop, we've a check (which is done
after the server stops) for the existence of pid file to
enquire if it was a normal shutdown or not. If the file is
absent, it means that the graceful exit of server had
removed this file.

However if the file is present, the scripts makes a plain
assumption that this file is leftover of the "current"
server. It misses to consider that it could be a valid pid
file belonging to another running mysql server.

We need to add more checks in the latter case. The script
should extract the PID from this existing file and check if
its running or not. If yes, it means an older instance of
mysql server is running and hence the script should abort.

FIX
===
Checking the status of process (alive or not) by adding a
@CHECK_PID@ in such a case. Aborting if its alive. Detailed
logic is as follows:

- The mysqld_safe script would quit at start only as soon
as it finds that there is an active PID i.e. a mysql server
is already running.
- The PID file creation takes place after InnoDb recovery,
which means in rare case (when PID file isn't created yet)
it may happen that more than 1 server can come up but even
in that case others will have to wait till the 1st server
has released the acquired InnoDb lock. In this case all
these servers will either TIMEOUT waiting for InnoDb lock
or after this they would find that the 1st server is
already running (by reading $pid_file) and would abort.
- Our core fix is that we now check the status of mysql
server process (alive or not) after the server stops
running within the loop of "run -> shutdown/kill/abort ->
run ... ", so that only the script who owns the mysql
server would be able to bring it down if required.

NOTE
====
Removed the deletion of pid file and socket file from entry
of the loop, as it may result in 2nd instance deleting
these files created by 1st instance in RACE condition.
Compensated this by deleting these files at end of the loop

Reverted the changes made in patch to Bug#16776528. So
after this patch is pushed, the concept of mysqld_safe.pid
would go altogether. This was required as the script was
deleting other instance's mysqld_safe.pid allowing multiple
mysqld_safe instances to run in parallel. This patch would
fix Bug#16776528 as well as the resources would be guarded
anyway by InnoDb lock + our planned 5.7 patch.

Loop until valid answer is given. Variants of y,yes and
n,no and blank (meaning default) are considered valid.

Issue:
------
While using the LOAD statement to insert data into an
updateable view, the check to verify whether a column
is actually updatable is missing.

Solution for 5.5 and 5.6:
-------------------------
For a view whose column-list in specified in the LOAD
command, this check is not performed. This fix adds the
check.

This is a partial backport of Bug#21097485.

Solution for 5.7 and trunk:
---------------------------
For a view whose column-list is specified in the LOAD
command, this check is already performed. This fix adds the
same check when no column-list is specified.

pidof is Linuxism, prefer pgrep on other UNIX systems.

The XML parser position stack for each level is with a fixed depth.
So a bounds check was done to ensure that this depth is not exceeded.
But it was off by one (i.e. the size of the array was a valid index).
Fixed by decreasing the allowable depth by one to match the maximum
number of elements in the position stack.

Add .gitattributes to let git archive ignore .gitignore.

Description :
=============
When a MTR test run is started, it initializes the server and creates
the datadir under '$MYSQL_TEST_DIR/var'('/tmp/var' or '/dev/shm/var'
if --mem option is used) location and then copies it to the datadir
location of server(s).

If $parallel == 1, datadir location of the server is
'$MYSQL_TEST_DIR/var/data'. If $parallel > 1, datadir location of any
server is '$MYSQL_TEST_DIR/var/<thread_num>/data'.

This is the reason MTR searches for the initialized datadir in 2
locations('$opt_vardir' and '$opt_vardir/..') from the current vardir
location..

But this can cause few problems. If a directory with the name 'data'
already exists under '$MYSQL_TEST_DIR' and if the MTR run is started
with parallel value 1, then

1. copytree($install_db, '$opt_vardir/..') command will fail if the
user doesn't have the access permission to '$MYSQL_TEST_DIR/data'
directory.
2. Unnecessary contents from '$MYSQL_TEST_DIR/data' directory will be
copied to server datadir location and this might affect the server
startup.

Fix :
=====
Depending on the $parallel value decide whether the path for the
initialize datadir is "$opt_vardir"(i.e $parallel = 1) or
"$opt_vardir/.."(i.e $parallel > 1).
Reviewed-by: Deepa Dixit <deepa.dixit@oracle.com>
Reviewed-by: Srikanth B R <srikanth.b.r@oracle.com>
RB: 14773

Post-push fix for memory leak in the code inside
DBUG_EXECUTE_IF("bug24449090_simulate_oom",...);

DESCRIPTION
===========
Performing a pattern match of a Regex resulting into a very
large string, leads to crash due to integer wraparound.

ANALYSIS
========
doinsert() - The length calculated here (to copy the
number of bytes) comes out to be too large to be stored in
the "int" variable 'length'. We need to ensure that the
variable can accommodate large lengths.

FIX
===
'length' in doinsert() is now defined as of type "size_t"
instead of "int"

DESCRIPTION
===========
Performing a pattern match of a Regex resulting into a very
large string, leads to crash due to failed realloc().

ANALYSIS
========
dupl() calls enlarge(). It in turn calls realloc() for
pointer p->strip. This eventually fails due to OOM.
However we are still using the same pointer in memcpy()
causing a SEGFAULT!

FIX
===
1) In dupl(), checking for error code (which would be set
if realloc fails) immediately after call to enlarge().
Returning now with this error code.

2) Handling the same in the caller functions.

(cherry picked from commit 7a39efab8a59ebdcd562fb788bc004ff338796ea)

No commit message

No commit message

  - Removed mysql.conf, mysqld.service and mysql-systemd-start from sles spec file

(cherry picked from commit 35c1adc17c1a99b2c256d374500437a6ce21339e)

  - Removed mysql.conf, mysqld.service and mysql-systemd-start from sles spec file

No commit message

PRIVILEGES

Require FILE privilege when creating tables using external data directory or
index directory.

Don't read --ledir option from config file.
Ignore current working for finding location of mysqld
Remove use of chown/chmod in scripts.
Be helpful only when basedir is /var/log or /var/lib.
Removed unused systemd files for SLES.
Set explicit basedir in scripts.

No commit message