The presumed reason for the error is that the file was opened
by 3rd party antivirus or backup program, causing ERROR_SHARING_VIOLATION
on rename.

The fix, actually a workaround, is to retry MoveFileEx couple of times
before finally giving up. We expect 3rd party programs not to hold file
for extended time.

Only starting with MariaDB Server 10.4 we may depend on C++11.

dict_foreign_qualify_index(): Reject corrupted or garbage indexes.
For index stubs that are created on virtual columns, no
dict_field_t::col would be assign. Instead, the entire table
definition would be reloaded on a successful operation.

Before commit 05fa4558 (MDEV-22110)
we have slot->type == MTR_MEMO_MODIFY that are unrelated to
incrementing the buffer-fix count.

FindBlock::operator(): In debug builds, skip MTR_MEMO_MODIFY entries.

Also, simplify the code a little.

This fixes an infinite loop in the tests
innodb.innodb_defragment and innodb.innodb_wl6326_big.

buf_page_create() is invoked when page is initialized. So that
previous contents of the page ignored. In few cases, it calls
buf_page_get_gen() is called to fetch the page from buffer pool.
It should take x-latch on the page. If other thread uses the block
or block io state is different from BUF_IO_NONE then release the
mutex and check the state and buffer fix count again. For compressed
page, use the existing free block from LRU list to create new page.
Retry to fetch the compressed page if it is in flush list

fseg_create(), fseg_create_general(): Introduce block as a parameter
where segment header is placed. It is used to avoid repetitive
x-latch on the same page

Change the assert to check whether the page has SX latch and
X latch in all callee function of buf_page_create()

mtr_t::get_fix_count(): Get the buffer fix count of the given
block added by the mtr

FindBlock is added to find the buffer fix count of the given
block acquired by the mini-transaction

An unsafe optimization was introduced by
commit 2347ffd8 (MDEV-20301)
which is based on
mysql/mysql-server@3f3136188f1bd383f77f97823cf6ebd72d5e4d7e or
mysql/mysql-server@647a3814a91c3d3bffc70ddff5513398e3f37bd4
in MySQL 8.0.12 or MySQL 8.0.13
(which in turn is based on the contribution in MySQL Bug #84958).

Row_sel_get_clust_rec_for_mysql::operator(): In addition to checking
that the pointer to the record matches, also check the latest
modification of the page (FIL_PAGE_LSN) as well as the page identifier.
Only if all three match, it is safe to reuse cached_old_vers.

Row_sel_get_clust_rec_for_mysql::check_eq(): Assert that the PRIMARY KEY
of the cached old version of the record corresponds to the latest version.

We got a test case where CHECK TABLE, UPDATE and purge would be
hammering on the same table (with only 6 rows) and a pointer that
was originally pointing to a record pk=2 would match a cached_clust_rec
that was pointing to a record pk=1. In the diagnosed `rr replay` trace,
we would wrongly return an old cached version of the pk=1 record,
instead of retrieving the correct version of the pk=2 record. Because
of this, CHECK TABLE would fail to count one of the records in a
secondary index, and report failure.

This bug appears to affect MVCC reads via secondary indexes only.
The purge of history in secondary indexes uses a different code path,
and so do checks for implicit record locks.

MDEV-7098 spider/bg.spider_fixes failed in buildbot with safe_mutex: Trying to unlock mutex conn->mta_conn_mutex that wasn't locked at storage/spider/spd_db_conn.cc, line 671

MDEV-7098 spider/bg.spider_fixes failed in buildbot with safe_mutex: Trying to unlock mutex conn->mta_conn_mutex that wasn't locked at storage/spider/spd_db_conn.cc, line 671

In the Microsoft environment, my_atomic requires int32.

build_template_field(): Initialize templ->rec_field_is_prefix
also for indexes on virtual columns. This was caught on 10.5 by
MemorySanitizer as use-of-uninitialized-value in
row_search_with_covering_prefix() when running the test
main.fast_prefix_index_fetch_innodb.

Add -Wno-missing-field-initializers for MyRocks and gcc version below 5.0

commit de942c9f (MDEV-15983)
introduced a race condition that we inadequately fixed in
commit 93b69825 (MDEV-16169).

Because fil_space_t::release() or fil_space_t::acquire() are
not protected by fil_system.mutex like their predecessors,
it is possible that stop_new_ops was set between the time
a thread checked fil_space_t::is_stopping() and invoked
fil_space_t::acquire().

In an execution trace, this happened in fil_system_t::keyrotate_next(),
causing an assertion failure in fil_delete_tablespace()
in the other thread that seeked to stop new operations.

We fix this bug by merging the flag fil_space_t::stop_new_ops
and the reference count fil_space_t::n_pending_ops into a
single word that is only being accessed by atomic memory operations.

fil_space_t::set_stopping(): Accessor for changing the state of
the former stop_new_ops flag.

fil_space_t::acquire(): Return whether the acquisition succeeded.
It would fail between set_stopping(true) and set_stopping(false).

In 10.3 OR REPLACE trigger option is part of create_info.

Passing a null pointer to a nonnull argument is not only undefined
behaviour, but it also grants the compiler the permission to optimize
away further checks whether the pointer is null. GCC -O2 at least
starting with version 8 may do that, potentially causing SIGSEGV.

These problems were caught in a WITH_UBSAN=ON build with the
Bug#7024 test in main.view.

Passing a null pointer to the "%s" argument of a printf-like
function is undefined behaviour. In the GNU libc implementation
of the printf() family of functions, it happens to work.

GCC 10.2.0 would diagnose this with -Wformat-overflow -Og.
In -fsanitize=undefined (WITH_UBSAN=ON) builds, a runtime error
would be generated. In some other builds, GCC 8 or later might infer
that the parameter is nonnull and optimize away further checks whether
the parameter is null, leading to SIGSEGV.

During insertion of clustered index, InnoDB does the check for foreign key
constraints. Problem is that it uses the clustered index entry to search
indexes of referenced tables and it could lead to unexpected result
when there is no foreign index.

Solution:
========
  Rebuild the tuple based on foreign column names before searching it
on reference index when there is no foreign index.

Backporting fixes for:

MDEV-22317: SIGSEGV in my_free/delete_dynamic in optimized builds (ARIA)
  Backported following commits from: 10.5.3
  commit 77e1b0c3 -- Post push fix.
  commit 2e6b21be

MDEV-22059: MSAN report at replicate_ignore_table_grant
  Backported following  commits from: 10.5.4
  commit 840fb495

Build failure was:
storage/innobase/os/os0proc.cc:144:3: error: use of undeclared identifier 'MEM_UNDEFINED'

                MEM_UNDEFINED(ptr, size);

Assumed to be introduced in MDEV-20377
commit: c36834c8

This also fixes MDEV-20464.

The InnoDB index fields store bytes, not characters.
Remove some unnecessary conversions from characters to bytes.

This also fixes MDEV-20422 and the wrong-result bug MDEV-12486.

Add a proper error handling of innobase_get_computed_value results in
row_upd_store_row/row_upd_store_v_row.

Also add an assertion in row_vers_build_clust_v_col to fail during row
purge.
Add one more assertion in row_sel_sec_rec_is_for_clust_rec for possible
future catches.

The problem was in improper error handling behavior in
`row_upd_build_difference_binary`:
`innobase_free_row_for_vcol` wasn't called.

To eliminate this problem in all potential places, a refactoring has been
made:
* class ib_vcol_row is added. It owns VCOL_STORAGE and heap and maintains
 it in RAII manner
* all innobase_allocate_row_for_vcol/innobase_free_row_for_vcol pairs are
 substituted
 with ib_vcol_row usage
* row_merge_buf_add is only left untouched because it doesn't own vheap
 passed as an argument
* innobase_allocate_row_for_vcol does not allocate VCOL_STORAGE anymore and
 accepts it as an argument -- this reduces a number of memory allocations
 * move rec_printer out of `#ifndef DBUG_OFF` and mark it cold

(This commit is exclusively for 10.1 branch, do not merge it to upper ones)

In case of a pattern of non-STMT_END-marked Rows-log-event (A) followed by
a STMT_END marked one (B) mysqlbinlog mixes up the base64 encoded rows events
with their pseudo sql representation produced by the verbose option:
      BINLOG '
        base64 encoded data for A
        ### verbose section for A
        base64 encoded data for B
        ### verbose section for B
      '/*!*/;
In effect the produced BINLOG '...' query is not valid and is rejected with the error.
Examples of this way malformed BINLOG could have been found in binlog_row_annotate.result
that gets corrected with the patch.

The issue is fixed with introduction an auxiliary IO_CACHE to hold on the verbose
comments until the terminal STMT_END event is found. The new cache is emptied
out after two pre-existing ones are done at that time.
The correctly produced output now for the above case is as the following:
      BINLOG '
        base64 encoded data for A
        base64 encoded data for B
      '/*!*/;
        ### verbose section for A
        ### verbose section for B

Thanks to Alexey Midenkov for the problem recognition and attempt to tackle,
Venkatesh Duggirala who produced a patch for the upstream whose
idea is exploited here, as well as to MDEV-23077 reporter LukeXwang who
also contributed a piece of a patch aiming at this issue.

Extra: mysqlbinlog_row_minimal refined to not produce mutable numeric values into the result file.

(This commit is for 10.3 and upper branches)

In case of a pattern of non-STMT_END-marked Rows-log-event (A) followed by
a STMT_END marked one (B) mysqlbinlog mixes up the base64 encoded rows events
with their pseudo sql representation produced by the verbose option:
      BINLOG '
        base64 encoded data for A
        ### verbose section for A
        base64 encoded data for B
        ### verbose section for B
      '/*!*/;
In effect the produced BINLOG '...' query is not valid and is rejected with the error.
Examples of this way malformed BINLOG could have been found in binlog_row_annotate.result
that gets corrected with the patch.

The issue is fixed with introduction an auxiliary IO_CACHE to hold on the verbose
comments until the terminal STMT_END event is found. The new cache is emptied
out after two pre-existing ones are done at that time.
The correctly produced output now for the above case is as the following:
      BINLOG '
        base64 encoded data for A
        base64 encoded data for B
      '/*!*/;
        ### verbose section for A
        ### verbose section for B

Thanks to Alexey Midenkov for the problem recognition and attempt to tackle,
and to Venkatesh Duggirala who produced a patch for the upstream whose
idea is exploited here, as well as to MDEV-23077 reporter LukeXwang who
also contributed a piece of a patch aiming at this issue.

(This commit is exclusively for 10.2 branch. Do not merge it to 10.3)

In case of a pattern of non-STMT_END-marked Rows-log-event (A) followed by
a STMT_END marked one (B) mysqlbinlog mixes up the base64 encoded rows events
with their pseudo sql representation produced by the verbose option:
      BINLOG '
        base64 encoded data for A
        ### verbose section for A
        base64 encoded data for B
        ### verbose section for B
      '/*!*/;
In effect the produced BINLOG '...' query is not valid and is rejected with the error.
Examples of this way malformed BINLOG could have been found in binlog_row_annotate.result
that gets corrected with the patch.

The issue is fixed with introduction an auxiliary IO_CACHE to hold on the verbose
comments until the terminal STMT_END event is found. The new cache is emptied
out after two pre-existing ones are done at that time.
The correctly produced output now for the above case is as the following:
      BINLOG '
        base64 encoded data for A
        base64 encoded data for B
      '/*!*/;
        ### verbose section for A
        ### verbose section for B

Thanks to Alexey Midenkov for the problem recognition and attempt to tackle,
and to Venkatesh Duggirala who produced a patch for the upstream whose
idea is exploited here, as well as to MDEV-23077 reporter LukeXwang who
also contributed a piece of a patch aiming at this issue.

FAILED: sql/CMakeFiles/sql.dir/sql_test.cc.o
/home/kevgs/bin/clang++ -DHAVE_CONFIG_H -DHAVE_EVENT_SCHEDULER -DHAVE_POOL_OF_THREADS -DMYSQL_SERVER -D_FILE_OFFSET_BITS=64 -Iinclude -I../include -I../sql -Ipcre -I../pcre -I../zlib -Izlib -I../extra/yassl/include -I../extra/yassl/taocrypt/include -Isql -I../wsrep -O2 -fdiagnostics-color=always -fno-omit-frame-pointer -gsplit-dwarf -march=native -mtune=native -fPIC -fno-rtti -g -DENABLED_DEBUG_SYNC -ggdb3 -DSAFE_MUTEX -Wall -Wdeclaration-after-statement -Wextra -Wformat-security -Wno-init-self -Wno-null-conversion -Wno-unused-parameter -Wno-unused-private-field -Woverloaded-virtual -Wvla -Wwrite-strings -Werror   -DHAVE_YASSL -DYASSL_PREFIX -DHAVE_OPENSSL -DMULTI_THREADED -MD -MT sql/CMakeFiles/sql.dir/sql_test.cc.o -MF sql/CMakeFiles/sql.dir/sql_test.cc.o.d -o sql/CMakeFiles/sql.dir/sql_test.cc.o -c ../sql/sql_test.cc
../sql/sql_test.cc:390:20: error: '::' and '*' tokens forming pointer to member type are separated by whitespace [-Werror,-Wcompound-token-split-by-space]
Item* (List<Item>:: *dbug_list_item_elem_ptr)(int)= &List<Item>::elem;
                 ~~^~
../sql/sql_test.cc:391:32: error: '::' and '*' tokens forming pointer to member type are separated by whitespace [-Werror,-Wcompound-token-split-by-space]
Item_equal* (List<Item_equal>:: *dbug_list_item_equal_elem_ptr)(int)=
                             ~~^~
../sql/sql_test.cc:393:32: error: '::' and '*' tokens forming pointer to member type are separated by whitespace [-Werror,-Wcompound-token-split-by-space]
TABLE_LIST* (List<TABLE_LIST>:: *dbug_list_table_list_elem_ptr)(int) =
                             ~~^~
3 errors generated.

While doing TOI buffer OR REPLACE option was not added to replicated
string.

This commit contains a fix and extended test case for a ASAN failure
reported during galera.fk mtr testing.
The reported heap buffer overflow happens in test case where a cascading
foreign key constraint is defined for a column of varchar type, and
galera.fk.test has such vulnerable test scenario.

Troubleshoting revealed that erlier fix for MDEV-19660 has made a fix
for cascading delete handling to append wsrep keys from pcur->old_rec,
in row_ins_foreign_check_on_constraint(). And, the ASAN failuer comes from
later scanning of this old_rec reference.

The fix in this commit, moves the call for wsrep_append_foreign_key() to happen
somewhat earlier, and inside ongoing mtr, and using clust_rec which is set
earlier in the same mtr for both update and delete cascade operations.
for wsrep key populating, it does not matter when the keys are populated,
all keys just have to be appended before wsrep transaction replicates.

Note that I also tried similar fix for earlier wsrep key append, but using
the old implementation with pcur->old_rec (instead of clust_rec), and same
ASAN failure was reported. So it appears that pcur->old_rec is not properly
set, to be used for wsrep key appending.

galera.galera_fk_cascade_delete test has been extended by two new test scenarios:
* FK cascade on varchar column.
  This test case reproduces same scenario as galera.fk, and this test scenario
  will also trigger ASAN failure with non fixed MariaDB versions.
* multi-master conflict with FK cascading.
  this scenario causes a conflict between a replicated FK cascading transaction
  and local transaction trying to modify the cascaded child table row.
  Local transaction should be aborted and get deadlock error.
  This test scenario is passing both with old MariaDB version and with this
  commit as well.