Updated the README file.

           INSERT IGNORE ... SELECT ... UNION SELECT ...

This assert was triggered by INSERT IGNORE ... SELECT. The assert checks that a
statement either sends OK or an error to the client. If the bug was triggered
on release builds, it caused OK to be sent to the client instead of the correct
error message (in this case ER_FIELD_SPECIFIED_TWICE).

The reason the assert was triggered, was that lex->no_error was set to TRUE
during JOIN::optimize() because of IGNORE. This causes all errors to be ignored.
However, not all errors can be ignored. Some, such as ER_FIELD_SPECIFIED_TWICE
will cause the INSERT to fail no matter what. But since lex->no_error was set,
the critical errors were ignored, the INSERT failed and neither OK nor the
error message was sent to the client.

This patch fixes the problem by temporarily turning off lex->no_error in
places where errors cannot be ignored during processing of INSERT ... SELECT.

Test case added to insert.test.

read_rnd_buffer_size

Applied the updated description from Paul's patch.

Undo workaround as fix is being merged in

failures on sparc64.

file .\item_subselect.cc, line 836

IN quantified predicates are never executed directly. They are rather wrapped
inside nodes called IN Optimizers (Item_in_optimizer) which take care of the
execution. However, this is not done during query preparation. Unfortunately
the LIKE predicate pre-evaluates constant right-hand side arguments even
during name resolution. Likely this is meant as an optimization.

Fixed by not pre-evaluating LIKE arguments in view prepare mode.

Reverted the ulong->uint diff
Re-applied the first diff.
The original commit message follows:

enum plugin system variables are ulong internally, not int.
On systems where long is not the same as an int it causes
problems. 
Fixed by correct typecasting. Removed the test from the 
experimental list.

Follow-up patch: added test cases for -0 and while

The enum system variables were handled inconsistently 
as ints, unsigned int and unsigned long on various places.
This caused problems on platforms on which 
sizeof(int) != sizeof(long).
Fixed by homogenizing the type of the enum variables
to unsigned int, since it's size compatible with the C enum
type. 
Removed the test from the experimental list.

if() treated any non-numeric string as false
Fixed to treat those as true instead
Added some test cases
Fixed missing $ in variable name in include/mix2.inc

Post fix

mysql-test/t/mysqlbinlog.test:
  Updated for Bug#34283

Post fix

mysql-test/t/mysqlbinlog.test:
  Updated for Bug#34283

      
With statement- or mixed-mode logging, "LOAD DATA INFILE" queries
are written to the binlog using special types of log events.
When mysqlbinlog reads such events, it re-creates the file in a
temporary directory with a generated filename and outputs a
"LOAD DATA INFILE" query where the filename is replaced by the
generated file. The temporary file is not deleted by mysqlbinlog
after termination.
      
To fix the problem, in mixed mode we go to row-based. In SBR, we
document it to remind user the tmpfile is left in a temporary
directory.


mysql-test/suite/binlog/r/binlog_mixed_load_data.result:
  Test result for BUG#34283.
mysql-test/suite/binlog/t/binlog_killed_simulate.test:
  Updated for BUg#34283
mysql-test/suite/binlog/t/binlog_mixed_load_data.test:
  Added the test file to verify that 'load data infile...' statement
  will go to row-based in mixed mode.
mysql-test/suite/binlog/t/binlog_stm_blackhole.test:
  Updated for BUg#34283
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
  Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_loaddata.test:
  Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_loaddata_fatal.test:
  Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_loaddata_map.test:
  Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test:
  Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_stm_log.test:
  Updated for B
mysys/stacktrace.c:
  Auto merge
sql/sql_lex.cc:
  Auto merg
sql/sql_load.cc:
  Added code to go to row-based in mixed mode for
  'load data infile ...' statement

With statement- or mixed-mode logging, "LOAD DATA INFILE" queries
are written to the binlog using special types of log events.
When mysqlbinlog reads such events, it re-creates the file in a
temporary directory with a generated filename and outputs a
"LOAD DATA INFILE" query where the filename is replaced by the
generated file. The temporary file is not deleted by mysqlbinlog
after termination.

To fix the problem, in mixed mode we go to row-based. In SBR, we
document it to remind user the tmpfile is left in a temporary
directory.




mysql-test/extra/rpl_tests/rpl_loaddata.test:
  Updated for Bug#34283
mysql-test/suite/binlog/r/binlog_mixed_load_data.result:
  Test result for BUG#34283.
mysql-test/suite/binlog/t/binlog_killed_simulate.test:
  Updated for Bug#34283
mysql-test/suite/binlog/t/binlog_mixed_load_data.test:
  Added the test file to verify that 'load data infile...' statement
  will go to row-based in mixed mode.
mysql-test/suite/binlog/t/binlog_stm_blackhole.test:
  Updated for Bug#34283
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
  Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_loaddata_fatal.test:
  Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_loaddata_map.test:
  Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test:
  Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_stm_log.test:
  Updated for Bug#34283
sql/sql_load.cc:
  Added code to go to row-based in mixed mode for
  'load data infile ...' statement

The expect file can now include "restart:<server options>"
Also drop check-testcase if this has been done
Added comment explaining the restart: syntax

scripts if cmake is available. We need to always generate the
scripts in order for the dual cmake/autotools support to work.

Fix compiler warnings.

mysys/stacktrace.c:
  Tag unused parameters.
sql/sql_lex.cc:
  Variable becomes unused in non-debug builds. Also, no need to
  assert the obvious.

******
This patch fixes the following bugs:
  - Bug#5889: Exit handler for a warning doesn't hide the warning in
    trigger
  - Bug#9857: Stored procedures: handler for sqlwarning ignored
  - Bug#23032: Handlers declared in a SP do not handle warnings generated
    in sub-SP
  - Bug#36185: Incorrect precedence for warning and exception handlers

The problem was in the way warnings/errors during stored routine execution
were handled. Prior to this patch the logic was as follows:

  - when a warning/an error happens: if we're executing a stored routine,
    and there is a handler for that warning/error, remember the handler,
    ignore the warning/error and continue execution.

  - after a stored routine instruction is executed: check for a remembered
    handler and activate one (if any).

This logic caused several problems:

  - if one instruction generates several warnings (errors) it's impossible
    to choose the right handler -- a handler for the first generated
    condition was chosen and remembered for activation.

  - mess with handling conditions in scopes different from the current one.

  - not putting generated warnings/errors into Warning Info (Diagnostic
    Area) is against The Standard.

The patch changes the logic as follows:

  - Diagnostic Area is cleared on the beginning of each statement that
    either is able to generate warnings, or is able to work with tables.

  - at the end of a stored routine instruction, Diagnostic Area is left
    intact.

  - Diagnostic Area is checked after each stored routine instruction. If
    an instruction generates several condition, it's now possible to take a
    look at all of them and determine an appropriate handler.

mysql-test/r/signal.result:
  Update result file:
    1. handled conditions are not cleared any more;
    2. reflect changes in signal.test
mysql-test/r/signal_demo3.result:
  Update result file: handled conditions are not cleared any more.
  Due to playing with max_error_count, resulting warning lists
  have changed.
mysql-test/r/sp-big.result:
  Update result file: handled conditions are not cleared any more.
mysql-test/r/sp-bugs.result:
  Update result file: handled conditions are not cleared any more.
mysql-test/r/sp-code.result:
  Update result file:
    1. handled conditions are not cleared any more.
    2. add result for a new test case in sp-code.test.
mysql-test/r/sp-error.result:
  Update result file:
    1. handled conditions are not cleared any more.
    2. add result for a new test case in sp-error.test.
mysql-test/r/sp.result:
  Update result file: handled conditions are not cleared any more.
mysql-test/r/sp_trans.result:
  Update result file: handled conditions are not cleared any more.
mysql-test/r/strict.result:
  Update result file: handled conditions are not cleared any more.
mysql-test/r/view.result:
  Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/innodb_storedproc_02.result:
  Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/memory_storedproc_02.result:
  Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/myisam_storedproc_02.result:
  Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/storedproc.result:
  Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_sp005.result:
  Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result:
  Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_trig003.result:
  Update result file: handled conditions are not cleared any more.
mysql-test/t/signal.test:
  Make a test case more readable in the result file.
mysql-test/t/sp-code.test:
  Add a test case for Bug#23032 checking that
  No Data takes precedence on Warning.
mysql-test/t/sp-error.test:
  Adding test cases for:
    - Bug#23032
    - Bug#36185
    - Bug#5889
    - Bug#9857
mysql-test/t/sp.test:
  Fixing test case to reflect behavioral changes made by the patch.
sql/sp_head.cc:
  Reset the per-statement warning count before executing
  a stored procedure instruction.
  
  Move to a separate function code which checks the
  completion status of the executed statement and searches
  for a handler.
  
  Remove redundant code now that search for a handler is
  done after execution, errors are always pushed.
sql/sp_pcontext.h:
  Remove unused code.
sql/sp_rcontext.cc:
  - Polish sp_rcontext::find_handler(): use sp_rcontext::m_hfound instead
    of an extra local variable;
  
  - Remove sp_rcontext::handle_condition();
  
  - Introduce sp_rcontext::activate_handler(), which prepares
    previously found handler for execution.
  
  - Move sp_rcontext::enter_handler() code into activate_handler(),
    because enter_handler() is used only from there;
  
  - Cleanups;
  
  - Introduce DBUG_EXECUTE_IF() for a test case in sp-code.test
sql/sp_rcontext.h:
  - Remove unused code
  - Cleanups
sql/sql_class.cc:
  Merge THD::raise_condition_no_handler() into THD::raise_condition().
  After the patch raise_condition_no_handler() was called
  in raise_condition() only.
sql/sql_class.h:
  Remove raise_condition_no_handler().
sql/sql_error.cc:
  Remove Warning_info::reserve_space() -- handled conditions are not
  cleared any more, so there is no need for RESIGNAL to re-push them.
sql/sql_error.h:
  Remove Warning_info::reserve_space().
sql/sql_signal.cc:
  Handled conditions are not cleared any more,
  so there is no need for RESIGNAL to re-push them.