If AUTOCOMMIT=1, then we do not need to make a plain SELECT set shared locks even on the SERIALIZABLE isolation level, because we know the transaction is read-only: a read-only transaction can always be performed on the REPEATABLE READ level, and that does not endanger the serializability


sql/ha_innodb.cc:
  If AUTOCOMMIT=1, then we do not need to make a plain SELECT set shared locks even on the SERIALIZABLE isolation level, because we know the transaction is read-only: a read-only transaction can always be performed on the REPEATABLE READ level, and that does not endanger the serializability

into mysql.com:/home/kostja/mysql/mysql-4.0-merge

client/mysqlbinlog.cc:
  fixed bug #1378 "mysqlbinlog for remote host is broken"
  by using shared part of code for local and remote variant 
  (function process_event)
mysql-test/r/mysqlbinlog.result:
  fixed results for remote variant 
  (they are the same as for local now)
mysql-test/t/mysqlbinlog.test:
  discarded note 'V. Vagin should ...' 
  because V.Vagin done
sql/log_event.cc:
  added special local_fname flag to Load_log_event for 
  using in Load_log_event::check_fname_outside_temp_buf 
  instead of ugly condition
sql/log_event.h:
  added special local_fname flag to Load_log_event for 
  using in Load_log_event::check_fname_outside_temp_buf 
  instead of ugly condition

BitKeeper/etc/ignore:
  auto-union
BitKeeper/etc/logging_ok:
  auto-union
mysql-test/r/func_math.result:
  Auto merged
mysql-test/t/func_math.test:
  Auto merged
sql/item_func.cc:
  Auto merged

BitKeeper/etc/logging_ok:
  Logging to logging@openlogging.org accepted
mysql-test/r/alter_table.result:
  Fix for bug #2628: test result fixed
mysql-test/t/alter_table.test:
  Fix for bug #2628: test case added
sql/sql_table.cc:
  Fix for bug #2628:
  We need to take into account database name when checking if source and 
  destination table names are equal.
  Note, that after merge to 4.0 we also need to check for 
  lower_case_table_names.

   1.5 to fix BUG#202 (update config.guess & co for MIPS architecture)


config.guess:
   - upplied diffs from libtool 1.5
config.sub:
   - upplied diffs from libtool 1.5
ltmain.sh:
   - upplied diffs from libtool 1.5

into mysql.com:/space/my/mysql-4.0

   so it gets picked up by "make dist" and updated init_file test accordingly.


mysql-test/std_data/init_file.dat:
  Rename: mysql-test/t/init_file.sql -> mysql-test/std_data/init_file.dat
mysql-test/t/init_file-master.opt:
   - moved init file to std_data
mysql-test/t/init_file.test:
   - updated info

into eagle.mysql.r18.ru:/home/vva/work/BUG_2526/mysql-4.0

into eagle.mysql.r18.ru:/home/vva/work/BUG_2526/mysql-4.0


sql/sql_class.cc:
  Auto merged

DROP DATABASE now assumes RAID directories are in hex. (Bug #2627)
Don't increment 'select_full_range' and similar statistics for EXPLAIN queries. (Bug #2506)
Test in configure if pthread_key_delete() exists (to fix compile problem on SCO) (Bug #2461)


BUILD/compile-pentium-max:
  Added --with-raid
configure.in:
  Added testing of pthread_key_delete (to fix compile problem on SCO)  (Bug #2461)
include/my_pthread.h:
  Added testing of pthread_key_delete (to fix compile problem on SCO)  (Bug #2461)
innobase/include/data0data.ic:
  Added missing newline
mysql-test/r/raid.result:
  Test of DROP DATABASE with RAID directories in hex
mysql-test/t/raid.test:
  Test of DROP DATABASE with RAID directories in hex
sql/sql_db.cc:
  DROP DATABASE could not drop databases with RAID tables that had
  more than 9 RAID_CHUNKS because DROP DATABASE assumed raid tables where in decimal while the RAID CREATE code assumed directories was in hex.(Bug #2627)
sql/sql_select.cc:
  Don't increment 'select_full_range' and similar statistics for EXPLAIN queries. (Bug #2506)
sql/sql_udf.cc:
  mysqld crashed if mysql.func table didn't exists (Bug #2577)

   (reduce the noise)


Build-tools/Bootstrap:
   - don't add merge ChangeSets to the Changelog (reduce the noise)

into mysql.com:/space/my/mysql-4.0

"CC: ERROR File = item.h, Line = 401 The identifier strtoll is undefined"
(compilation failure on SGI IRIX + MIPSPro 7.41)
Compilation script implemented.
Tested in 32 and 64 bit mode


configure.in:
  Fix for bug #2214: we should not reset CXXFLAGS on IRIX for build 
  script to work

into serg.mylan:/usr/home/serg/Abk/mysql-4.0

into hegel.local:/home/miguel/dev/mysql-4.0

into hegel.local:/home/miguel/dev/mysql-4.0

(fixed bug #2526 "--init-file crashes MySQL if contains large select")
Such checking usually works in send_ok, send_eof, but in this case large 
result causes interim flushing.


sql/sql_class.cc:
  added checking for bootstrap in select_send::send_data

into serg.mylan:/usr/home/serg/Abk/mysql-4.0

 - more flexible removal of old cruft before creating the new binary
   distribution
 - more flexible globbing for the binary tarball (required for QNX, where
   the file name ends on *.tgz instead of .tar.gz due to file name lenght
   restrictions


Build-tools/Do-compile:
  Some small enhancements:
  
   - more flexible removal of old cruft before creating the new binary
     distribution
   - more flexible globbing for the binary tarball (required for QNX, where
     the file name ends on *.tgz instead of .tar.gz due to file name lenght
     restrictions

into mysql.com:/space/my/mysql-4.0

into mysql.com:/home/my/mysql-4.0


sql/mysqld.cc:
  Auto merged

mysql-test/r/ctype_tis620.result:
  Cleanup test
mysql-test/r/range.result:
  Test problem with range optimization over overlapping ranges (#2448)
mysql-test/t/ctype_tis620.test:
  Cleanup test
mysql-test/t/range.test:
  Test problem with range optimization over overlapping ranges (#2448)
sql/mysqld.cc:
  Remove debug statement
strings/ctype-tis620.c:
  est problem with range optimization over overlapping ranges (#2448)

from command line did not work.

into mysql.com:/home/my/mysql-4.0


sql/mysqld.cc:
  Auto merged
sql/sql_parse.cc:
  Auto merged
sql/sql_show.cc:
  Auto merged

   binary distribution and Server RPM


myisam/myisam_ftdump.c:
  Rename: myisam/ft_dump.c -> myisam/myisam_ftdump.c
BitKeeper/etc/ignore:
  Added myisam/myisam_ftdump to the ignore list
myisam/Makefile.am:
   - renamed ft_dump to myisam_ftdump and added it to bin_PROGRAMS
scripts/make_binary_distribution.sh:
   - added myisam_ftdump to the binary distribution
support-files/mysql.spec.sh:
   - added myisam_ftdump to the Server package

into serg.mylan:/usr/home/serg/Abk/mysql-4.0


sql/mysqld.cc:
  Auto merged

into gw.mysql.r18.ru:/usr/home/ram/work/4.0.b2185

Now one need only SELECT privilege for tables that are only read in
UPDATE statements with many tables. (Bug #2377).


sql/sql_acl.cc:
  Comment cleanup
sql/sql_parse.cc:
  Merged duplicate code.
  Removed some outdated 'tables->db' tests.
  Check privileges for multi-updates properly (Bug #2377)
sql/sql_show.cc:
  Remove disabled code
sql/sql_update.cc:
  Ensure that privileges are tested properly for multi-table-updates
tests/grant.pl:
  Added more tests
tests/grant.res:
  updated results

Marked --bdb-no-sync as deprecated
Added --sync-bdb-logs / --disable-sync-bdb-logs as a synonym / alternative.


mysys/my_getopt.c:
  Changed my_getopt so that disabled_my_option can be used for
  GET_BOOL type options too.
sql/mysql_priv.h:
  Added opt_sync_frm
sql/mysqld.cc:
  Added sync-frm / disable-sync-frm to mysqld, to be able to disable
  use of my_sync() (fsync()). This defaults to behavior in 4.0.16
  and before, where creating of new tables is quicker than currently.
  This option is enabled by default.
  
  Marked --bdb-no-sync as deprecated option and added another one,
  --sync-bdb-logs besides. --bdb-no-sync and --disabled-sync-bdb-logs
  are now synonyms.
sql/unireg.cc:
  One can disable my_sync() by using --disable-sync-frm
BitKeeper/etc/logging_ok:
  Logging to logging@openlogging.org accepted