Temporarily disable rocksdb.compact_deletes.

use_direct_writes was renamed to use_direct_io_for_flush_and_compaction

- Update rocksdb submodule to revision
  d616ebea23fa88cb9c2c8588533526a566d9cfab
- Normally this should be done by doing a merge from upstream
  MyRocks, but now we are just updating rocksdb, MyRocks merge will
  follow later.
- Apply a part of 4f6f072f6c74513087004755508eb6d6c432c5c1
  use_direct_writes was renamed to use_direct_io_for_flush_and_compaction
- Update build_rocksdb.cmake - RocksDB have moved files around

post-fix for 0b52b28b

* restore EXPLAIN output
* remove redundant code

MDEV-12293 Assertion `table->no_keyread || !table->covering_keys.is_set(tab->index) || table->file->keyread == tab->index' failed

sometimes the optimizer starts a keyread on some index
and later (but before any actual index accesses) changes
it to a keyread on a different index

Recompile it for embedded.
Test it for embedded.
Promote it to Gamma

innochecksum uses global variables. great, let's use them all the
way down, instead of passing them as arguments to innodb internals,
conditionally modifying function prototypes with #ifdefs

The bug happened when the specification of a recursive CTE had
no recursive references at the top level of the specification.
In this case the regular processing of derived table references
of the select containing a non-recursive reference to this
recursive CTE misses handling the specification unit.
At the preparation stage any non-recursive reference to a
recursive CTE must be handled after the preparation of the
specification unit for this CTE. So we have to force this
preparation when regular handling of derived tables does not
do it.

This fixes a regression caused by MDEV-12428.
When we introduced a variant of fil_space_acquire() that could
increment space->n_pending_ops after space->stop_new_ops was set,
the logic of fil_check_pending_operations() was broken.

fil_space_t::n_pending_ios: A new field to track read or write
access from the buffer pool routines immediately before a block
write or after a block read in the file system.

fil_space_acquire_for_io(), fil_space_release_for_io(): Similar
to fil_space_acquire_silent() and fil_space_release(), but
modify fil_space_t::n_pending_ios instead of fil_space_t::n_pending_ops.

fil_space_free_low(): Wait for space->n_pending_ios to reach 0,
to avoid accessing freed data in a concurrent thread. Future
calls to fil_space_acquire_for_io() will not find this tablespace,
because it will already have been detached from fil_system.

Adjust a number of places accordingly, and remove some redundant
tablespace lookups.

FIXME: buf_page_check_corrupt() should take a tablespace from
fil_space_acquire_for_io() as a parameter. This will be done
in the 10.1 version of this patch and merged from there.
That depends on MDEV-12253, which has not been merged from 10.1 yet.

Allow setting up binlog_format other then row for session scope for galera/
flashback.

Ref:- Mdev-7322

On several buildbot machines, the test fails like this:

CURRENT_TEST: wsrep.binlog_format
mysqltest: At line 12: query 'SET binlog_format=STATEMENT' failed:
1231: Variable 'binlog_format' can't be set to the value of 'STATEMENT'

ANALYSIS

This is regression caused due to worklog 6742 which
implemented ha_innobase::records() which always
uses clustered index to get the row count. Previously
optimizer chose secondary index which was smaller in
size of clustered index to scan for rows and resulted in
a quicker scan.

FIX

After discussion it was decided to remove this feature in 5.7.

[#rb14040 Approved by Kevin and Oystein ]

- Allow the server to start if innodb force recovery is set to 6
even though change buffer is not empty
Reviewed-by: Jimmy Yang <jimmy.yang@oracle.com>

buf_chunk_not_freed(), logs_empty_and_mark_files_at_shutdown():
Relax debug assertions when innodb_force_recovery=6
implies innodb_read_only.

Problem:
========
 - Drop table assert if innodb_force_recovery is set to 5 or 6.
For innodb_force_recovery 5 and 6, InnoDB doesn't scan the undo log
and it makes the redo rollback segment as NULL. There is no way for
transaction to write any undo log.

 - If innodb_force_recovery is set to 6 then InnoDB does not do the
redo log roll-forward in connection with recovery. In this case,
log_sys will be initalized only and it will not have latest
checkpoint information. Checkpoint is done during shutdown even
innodb_force_recovery is set to 6. So it leads to incorrect
information update in checkpoint header.

Solution:
========
1) Allow drop table only if innodb_force_recovery < 5.
2) Make innodb as read-only if innodb_force_recovery is set to 6.
3) During shutdown, remove the checkpoint if innodb_force_recovery
is set to 6.
Reviewed-by: Jimmy Yang <jimmy.yang@oracle.com>
RB: 15075

Problem:
========
During checkpoint, we are writing all MLOG_FILE_NAME records in one mtr
and parse buffer can't be processed till MLOG_MULTI_REC_END. Eventually parse
buffer exceeds the RECV_PARSING_BUF_SIZE and eventually it overflows.

Fix:
===
1) Break the large mtr if it exceeds LOG_CHECKPOINT_FREE_PER_THREAD into multiple mtr during checkpoint.
2) Move the parsing buffer if we are encountering only MLOG_FILE_NAME
records. So that it will never exceed the RECV_PARSING_BUF_SIZE.
Reviewed-by: Debarun Bannerjee <debarun.bannerjee@oracle.com>
Reviewed-by: Rahul M Malik <rahul.m.malik@oracle.com>
RB: 14743

Description:
===========
Add my_thread_init() and my_thread_exit() for background threads which
initializes and frees the st_my_thread_var structure.

Reviewed-by: Jimmy Yang<jimmy.yang@oracle.com>
RB: 15003

Problem:

During read head, wrong page size is used to calcuate the tablespace size.

Fix:

Use physical page size to calculate tablespace size

Reveiwed-By: Satya Bodapati
RB: 14993

Split the test case so that a server restart is not needed.
Reduce the test cases and use a simpler mechanism for triggering
and waiting for purge.

fil_table_accessible(): Check if a table can be accessed without
enjoying MDL protection.

PROBLEM

When truncating single tablespace tables, we need to scan the entire
buffer pool to remove the pages of the table from the buffer pool.
During this scan and removal dict_sys->mutex is being held ,causing
stalls in other DDL operations.

FIX

Release the dict_sys->mutex during the scan and reacquire it after the
scan. Make sure that purge thread doesn't purge the records of the table
being truncated and background stats collection thread skips the updation
of stats for the table being truncated.

[#rb 14564 Approved by Jimmy and satya ]

srv_sys_t::n_threads_active[]: Protect writes by both the mutex and
by atomic memory access.

srv_active_wake_master_thread_low(): Reliably wake up the master
thread if there is work to do. The trick is to atomically read
srv_sys->n_threads_active[].

srv_wake_purge_thread_if_not_active(): Atomically read
srv_sys->n_threads_active[] (and trx_sys->rseg_history_len),
so that the purge should always be triggered when there is work to do.

trx_commit_in_memory(): Invoke srv_wake_purge_thread_if_not_active()
whenever a transaction is committed. Purge could have been prevented by
the read view of the currently committing transaction, even if it is
a read-only transaction.

trx_purge_add_update_undo_to_history(): Do not wake up the purge.
This is only called by trx_undo_update_cleanup(), as part of
trx_write_serialisation_history(), which in turn is only called by
trx_commit_low() which will always call trx_commit_in_memory().
Thus, the added call in trx_commit_in_memory() will cover also
this use case where a committing read-write transaction added
some update_undo log to the purge queue.

trx_rseg_mem_restore(): Atomically modify trx_sys->rseg_history_len.

Also, remove the unused global variable srv_priority_boost.

Problem:
=======
Concurrent update dml statement doesn't reflect in virtual index during
inplace table rebuild. It results mismatch value in virutal index and
clustered index. Deleting the table content tries to search the mismatch
value in virtual index but it can't find the value. During log update
apply phase, virtual information is being ignored while constructing
the new entry.

Solution:
=========
In row_log_update_apply phase, build the entry with virtual column
information. So that it can reflect in newly constructed virtual index.

Reviewed-by: Jimmy Yang<jimmy.yang@oracle.com>
RB: 14974

Issue:
======
Disabling macros such as UNIV_PFS_MUTEX/UNIV_PFS_RWLOCK/UNIV_PFS_THREAD
which are defined in InnoDB throws errors during compilation.

Fix:
====
Fix all the compilation errors.

RB: 14893
Reviewed-by: Jimmy Yang <Jimmy.Yang@oracle.com>
Reviewed-by: Satya Bodapati <satya.bodapati@oracle.com>

Issue:
======
The issue is that if a fts index is present in a table the space size is
incorrectly calculated in the case of truncate which results in a invalid
read.

Fix:
====
Have a different space size calculation in truncate if fts indexes are
present.

RB:14755
Reviewed-by: Shaohua Wang <shaohua.wang@oracle.com>

Analysis:
========
 There was missing bracket for IF conditon in dict_stats_analyze_index_level()
and it leads to wrong result.

Fix:
====
 Fix the IF condition in dict_stats_analyze_index_level() so that it satisfied
the if condtion only if level is zero.

Reviewed-by : Jimmy Yang <jimmy.yang@oracle.com>

Analysis:
========
Field name comparison happens while filling the virtual columns
affected by foreign constraint. But field name is NULL in virtual
index for the newly added virtual column.

Fix:
===
Ignore the index if it has newly added virtual column. Foreign
key affected virtual column information is filled during
loading operation.
Reviewed-by: Jimmy Yang <jimmy.yang@oracle.com>
RB: 14895

Problem :
---------
Information_Schema.referential_constraints (UNIQUE_CONSTRAINT_NAME)
shows NULL for a foreign key constraint after restarting the server.
If any dml or query (select/insert/update/delete) is done on
referenced table, then the constraint name is correctly shown.

Solution :
----------
UNIQUE_CONSTRAINT_NAME column is the key name of the referenced table.
In innodb, FK reference is stored as a list of columns in referenced
table in INNODB_SYS_FOREIGN and INNODB_SYS_FOREIGN_COLS. The referenced
column must have at least one index/key with the referenced column as
prefix but the key name itself is not included in FK metadata. For this
reason, the UNIQUE_CONSTRAINT_NAME is only filled up when the
referenced table is actually loaded in innodb dictionary cache.

The information_schema view calls handler::get_foreign_key_list() on
foreign key table to read the FK metadata. The UNIQUE_CONSTRAINT_NAME
information shows NULL based on whether the referenced table is
already loaded or not.

One way to fix this issue is to load the referenced table while reading
the FK metadata information, if needed.
Reviewed-by: Sunny Bains <sunny.bains@oracle.com>

RB: 14654

This bug is caused by missing page number field when store btree cursor.

Reviewed-by: Jimmy Yang<jimmy.yang@oracle.com>
RB: 14617

Problem :
---------
This bug is filed from the base replication bug#25040331 where the
slave thread times out while INSERT operation waits on GAP lock taken
during Foreign Key validation.

The primary reason for the lock wait is because the statements are
getting replayed in different order. However, we also observed
two things ...

1. The slave thread could always use "Read Committed" isolation for
row level replication.

2. It is not necessary to have GAP locks in "READ Committed" isolation
level in innodb.

This bug is filed to address point(2) to avoid taking GAP locks during
Foreign Key validation.

Solution :
----------
Innodb is primarily designed for "Repeatable Read" and the GAP lock
behaviour is default. For "Read Committed" isolation, we have special
handling in row_search_mvcc to avoid taking the GAP lock while
scanning records.

While looking for Foreign Key, the code is following the default
behaviour taking GAP locks. The suggested fix is to avoid GAP
locking during FK validation similar to normal search operation
(row_search_mvcc) for "Read Committed" isolation level.
Reviewed-by: Sunny Bains <sunny.bains@oracle.com>

RB: 14526

Problem :
---------
1. delete_all_rows() and rnd_init() are not returning error
after async rollback in 5.7. This results in assert in
innodb in next call.

2. High priority transaction is rolling back prepared transaction.
This is because TRX_FORCE_ROLLBACK_DISABLE is getting set only for
first entry [TrxInInnoDB].

Solution :
----------
1. return DB_FORCED_ABORT error after rollback.
2. check and disable rollback in TrxInInnodb::enter always.
Reviewed-by: Sunny Bains <sunny.bains@oracle.com>

RB: 13777

Problem: Some instantiations of std::map have discrepancies between
the value_type of the map and the value_type of the map's allocator.
On FreeBSD 11 this is detected by Clang, and an error is raised at
compilation time.

Fix: Specify the correct value_type for the allocators.

Also fix an unused variable warning in storage/innobase/os/os0file.cc.