Correction of backport patch:
* Fixed signature of check_access_table() for embedded build
* Fixed typo for last argument in a check_access() call from UINT_MAX to 0.

------------------------------------------------------------
revno: 3624
revision-id: jon.hauglid@sun.com-20090928163426-2lg1gofzz44xzzxf
parent: alik@sun.com-20090928050057-r0a62x9czr01q7oe
committer: Jon Olav Hauglid <jon.hauglid@sun.com>
branch nick: mysql-6.0-codebase-bugfixing-bug47304
timestamp: Mon 2009-09-28 18:34:26 +0200
message:
  Bug #47304 Test main.mdl_sync fails on embedded server

  The problem was that SHOW PROCESSLIST was trying to access
  a thread that was not properly running and therefore had an 
  uninitialized mutex.

  This patch explicitly resets thd->mysys_var after each embedded
  server command to prevent the mutex from being accessed in an
  illegal state.

  The patch also re-enables lock_multi.test and mdl_sync.test for 
  embedded server as they had been disabled because of this bug.

------------------------------------------------------------
revno: 2617.31.21
revision-id: davi.arnaut@sun.com-20090402193933-2zbhg15kd0z3xh8r
parent: alik@sun.com-20090402081500-78l1hpkx03twe4bf
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 41971-6.0
timestamp: Thu 2009-04-02 16:39:33 -0300
message:
  Bug#41971: Thread state on embedded server is always "Writing to net"
 
  The problem is that the state of a thread on a embedded server is
  always displayed as "Writing to net", which is wrong as there is
  no "network" in the embedded server.

  The solution is only exclude, on a embedded server, the thread
  state conditions that are related to network operations. Other
  thread states related to waiting on conditions or other operations
  are preserved.

sql/sql_show.cc:
  Unroll conditionals into a function. Skip check for network
  operations on the embedded library. Change use of thread_info::
  command to retrieve the command directly from the thread
  handle -- they have the same value.

SIGWINCH is not defined in termios.h on HP/UX.

  
Added this option, named as "--dump-slave". The purpose of this option is to be
able to produce a dump from a slave used for making backups of the master. Originally,
dumping from the main master was fine, but as more data accumulated, the dump process
would take over 30 minutes, locking up the master database hence website for 30 minutes.
A slave dedicated to producing backups was the answer, but I needed a dump that could be

used to restore a slave instantly and in order to do that, it has to have three things 
contained in the dump:
  
  1. "STOP SLAVE;" at the beginning
  2. "CHANGE MASTER TO ...<the master - info from 'show slave status'>"
  3. "START SLAVE;" at the end
  
These options in this changeset contain this.
  
  --stop-slave adds "STOP SLAVE" to the beginning of the dump and "STOP SLAVE" 
  to the end of the dump.
  
  --include-host gives the user the option to have the host explicitely added
  to the "CHANGE MASTER TO ..." line.
  
  --dump-slave adds the "CHANGE MASTER ..." to the dump representing not the slave's
  master binlog info, but the slave's master's info from "SHOW SLAVE STATUS" 


client/client_priv.h:
  Added OPT_SLAVE_DATA to client_priv.h
client/mysqldump.c:
  * Added --dump-slave option (name per Brian)
  * Added --stop-slave to print "STOP SLAVE;" into the dump
  * Added --include-host option to include "MASTER_HOST=..." and "MASTER_PORT=..."
    to the dump since unlike --master-data, the host can't be assumed to be
    the local host
  * Added do_start_slave and do_stop_slave to stop the slave sql thread upon
    start of the dump process, and to start the slave sql upon finish of dump process -
    to keep the log information frozen during this time.
  * Added do_show_slave_status for obtaining slave information needed to compose 
    "CHANGE MASTER ..." output to the master of this slave.
  * Added necessary long options and defines required for new options

  
Feature from Eric Bergen, CLA signed 2007-06-27.
  
Adds new mysql client option "--auto-vertical-output", which causes
the client to test whether a result table is too wide for the current
window (where available) and emit vertical results in that case.
Otherwise, it sends normal tabular results.


client/client_priv.h:
  Add another enum value to client options, for automatic vertical output.
client/mysql.cc:
  Add another command-line option, "auto-vertical-output".
      
  Add functions to get the terminal width and functions to get the widths of fields.
      
  Use them together to emit vertical output when some output table is too wide to
  fit in the terminal.  If the terminal doesn't support reading its width, then assume
  80-positions wide.
mysql-test/r/mysql.result:
  Show that various select statements do work as expected.  Wide tables become vertical
  and narrow ones do not.
mysql-test/t/mysql.test:
  Show that various select statements do work as expected.
      
  These should be suitable for a wide range of window capabilities and sizes.  Under
  extreme circumstances, the results could be arbitrary.

           deadlocks

Backport of revno: 2617.68.35

The problem was that if one connection is running a multi-statement 
transaction which involves a single partitioned table, and another 
connection attempts to alter the table to drop a non-existing partition,
(which of course will fail), the first connection still gets 
ER_LOCK_DEADLOCK and cannot proceed anymore.

This bug is no longer reproducable. This has also been tested with the
patch for Bug#46654 "False deadlock on concurrent DML/DDL with partitions, 
inconsistent behavior" which concerned a similar problem but where the 
ALTER TABLE is semantically correct.

Test case added in partition_sync.test.

      
Another code-path dropped sign of TIME, presuming all time is positive.
      
Minds sign now. Patch depends on ChangeSet for 42661.


mysql-test/r/type_time.result:
  Show we now no longer ignore sign of TIME-type
  in this code-path.
mysql-test/t/type_time.test:
  Show we now no longer ignore sign of TIME-type
  in this code-path.
sql/item_cmpfunc.cc:
  TIME_to_ulonglong() (somewhat obviously) loses sign
  of its argument, so we put it back in where needed.

Bug#42662: maketime() and signedness
      
Item_time_typecast::val_int() dropped sign from
MYSQL_TIME gotten using from get_time().
      
Propagates sign now.


Backported to 5.5.0  (6.0-codebase revid: 1810.3897.1)

      
When less than six places are given for microseconds, we zerofill from
the right (leftmost place is always 1/10s). We only did this when all
announced date/time fields were given; now we also format fractional
seconds when more significant fields are left out.


mysql-test/r/func_time.result:
  show that we treat fractions of seconds correctly (zerofill from
  right to six places) even if we left out fields on the left
mysql-test/t/func_time.test:
  show that we treat fractions of seconds correctly (zerofill from
  right to six places) even if we left out fields on the left
sql/item_timefunc.cc:
  format fractions of seconds even if announced
  more significant fields were left out

  
The presence of "--skip" parameters is obscure, when it should be
obvious from the text.
  
Now, for boolean options, when they're default to ON and the --skip
is more useful parameter, then tell the user of its existence.

Backported from 6.0-codebase, revid  2572.14.1

```---------------------------------------------------------
revno: 2599.178.12
revision-id: alik@mysql.com-20080812161845-we7cx9f22yrghob1
committer: Alexander Nozdrin <alik@mysql.com>
branch nick: 6.0-rt-build
timestamp: Tue 2008-08-12 20:18:45 +0400
message:
  Fix memory leak.
```

---------------------------------------------------------

Backport for 5.5

In non debug builds, the statements:
- SHOW PROCEDURE CODE
- SHOW FUNCTION CODE
used to fail with a "syntax error", which is misleading.

These statements have been changed to return the following error for non
debug builds:
ERROR HY000: The 'SHOW PROCEDURE|FUNCTION CODE' feature is disabled; you
need MySQL built with '--with-debug' to have it working

For debug builds (./configure --with-debug), nothing is changed.

Backport for 5.5

Backport to 5.5

      
When the query cache is disabled, the server shouldn't attempt to take the 
query cache mutex.
                             
By using the command line option --query_cache_type=0, the user can disable
   
(backport from mysql-pe)


mysql-test/t/query_cache_disabled-master.opt:
  * added test case for bug38551
mysql-test/t/query_cache_disabled.test:
  * added test case for bug38551
sql/set_var.cc:
  * Added before-trigger to verify that query_cache_type wasn't turned off or on during
  runtime.
sql/set_var.h:
  * Changed order on how the enumeration is processed. By first projecting the
  character representation of the variable to a temporary integer we can have
  one function instead of two to check if the value is valid.
sql/share/errmsg-utf8.txt:
  * Added error message for query cache disabled state
sql/sql_cache.cc:
  * If the query cache is disabled at start up, shorten the execution path and avoid
  grabbing the query cache mutex each time the invalidate interface methods are called.
sql/sql_cache.h:
  * Added new methods to set the query cache into a disabled state.

per-file comments:
  mysql-test/r/mysql_upgrade.result
     result updated
  mysql-test/t/mysql_upgrade.test
     --skip-verbose option added to the call

Item_sum::set_aggregator() may be called multiple times during query preparation.
On subsequent calls: verify that the aggregator type is the same,
and re-use the existing Aggregator.


sql/item_sum.cc:
  In Item_sum::set_aggregator(): re-use existing Aggregator if already set.
  
  Remove some friend declarations, add some accessor functions.
  Cleanup some DBUG_ENTER and DBUG_RETURN code.
sql/item_sum.h:
  Make some member fields private, add accessors instead.
  Remove some un-necessary friend declarations.
  Remove some default arguments from constructors.
sql/opt_sum.cc:
  Use accessor functions in Item_sum.
sql/sql_select.cc:
  Fix mis-spelled DBUG_ENTER text.
  Use accessor functions in Item_sum.
sql/sql_yacc.yy:
  Use explicit true/false rather than default arguments when constructing
  Item_sum_xxx objects.

   (backport)
   mysql_upgrade script accepts --upgrade-system-tables option,
   fixing only system tables in this case.

per-file comments:
  client/mysql_upgrade.c
WL#4991 mysql_upgrade --fix-privilege-tables
    --upgrade-system-tables option added.
   if it is set, the tool won't look for the mysqlcheck then
   run_mysqlcheck_fixnames() and run_mysqlcheck_upgrade won't be called.
  mysql-test/r/mysql_upgrade.result
WL#4991 mysql_upgrade --fix-privilege-tables
    test result added
  mysql-test/t/mysql_upgrade.test
WL#4991 mysql_upgrade --fix-privilege-tables
    test case added

Disabled execution of this test for embedded server until fix for
bug 41971 'Thread state on embedded server is always "Writing to net"'
is back-ported to this tree.

clean up message list).