Do not use nested AC_CHECK_FUNC() because they result in:

./configure: line 52688: syntax error: unexpected end of file

(which happens only on some platforms and does not happen on others,
I have no idea what is the reason for this)

AC_CHECK_FUNCS(f1 f2 f3, ACTION_IF_PRESENT)
ACTION_IF_PRESENT is executed if any of f1, f2 or f3 is present.
Fix this misusage, we want the action to be executed if all of the
functions are present.

that aren't strings

rb://560 approved by Sunny Bains

old URL: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html
new URL: http://dev.mysql.com/doc/refman/5.1/en/forcing-innodb-recovery.html

Notice that there is a redirect from the old URL to the new URL, so visiting
the old URL does not give "page not found" error.

old URL: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html
new URL: http://dev.mysql.com/doc/refman/5.1/en/forcing-innodb-recovery.html

Notice that there is a redirect from the old URL to the new URL, so visiting
the old URL does not give "page not found" error.

Modifications in mysql-5.1 engines test suite.

constraint creation

rb://557 Approved by Sunny Bains

This is 5.1 built-in specific as the dict_table_t strcture is allocated
with mem_heap_zalloc since 5.1 plugin.

Approved by Sunny Bains

Avoid handler::info() call for three Information Schema tables;
TABLE_CONSTRAINTS, KEY_COLUMN_USAGE, & REFERENTIAL_CONTRAINTS

This assert could be triggered if -1 was inserted into
an auto increment column by a statement writing more than
one row.

Unless explicitly given, an interval of auto increment values
is generated when a statement first needs an auto increment
value. The triggered assert checks that the auto increment
counter is equal to or higher than the lower bound of this
interval.

Generally, the auto increment counter starts at 1 and is
incremented by 1 each time it is used. However, inserting an
explicit value into the auto increment column, sets the auto
increment counter to this value + 1 if this value is higher
than the current value of the auto increment counter.

This bug was triggered if the explicit value was -1. Since the
value was converted to unsigned before any comparisons were made,
it was found to be higher than the current vale of the auto
increment counter and the counter was set to -1 + 1. This value
was below the reserved interval and caused the assert to be
triggered the next time the statement tried to write a row.

With the patch for Bug#39828, this bug is no longer repeatable.
Now, -1 + 1 is detected as an "overflow" which causes the auto
increment counter to be set to ULONGLONG_MAX. This avoids hitting
the assert for the next insert and causes a new interval of
auto increment values to be generated. This resolves the issue.

This patch therefore only contains a regression test and no code
changes. Test case added to auto_increment.test.

so will be run only weekly; this closes BUG#50595.

mysqlbinlog only prints "use $database" statements to its output stream
when the active default database changes between events. This will cause
"No Database Selected" error when dropping and recreating that database.

To fix the problem, we clear print_event_info->db when printing an event
of CREATE/DROP/ALTER database statements, so that the Query_log_event
after such statements will be printed with the use 'db' anyway except
transaction keywords.

- Removed files specific to compiling on OS/2
- Removed files specific to SCO Unix packaging
- Removed "libmysqld/copyright", text is included in documentation
- Removed LaTeX headers for NDB Doxygen documentation
- Removed obsolete NDB files
- Removed "mkisofs" binaries
- Removed the "cvs2cl.pl" script
- Changed a few GPL texts to use "program" instead of "library"

marko.makela@oracle.com-20101221112722-1yxxzzgqtem8bcm7

The fix was suggested by Jimmy.

ASSERT happens due to improper calculation of the max_length
in Item_func_div object, if dividend has max_length == 0 then
Item_func_div::max_length is set to 0 under some circumstances.
The fix:
If decimals == NOT_FIXED_DEC then set
Item_func_div::max_length to max possible
DOUBLE length value.

Problem: master executed a statement that would fail on slave
(namely, DROP USER 'create_rout_db'@'localhost').
Then the test did:
  --let $rpl_only_running_threads= 1
  --source include/rpl_reset.inc
rpl_reset.inc calls rpl_sync.inc, which first checks which of
the threads are running and then syncs those threads that are
running. If the SQL thread fails after the check, the sync will
fail. So there was a race in the test and it failed on some
slow hosts.
Fix: Don't replicate the failing statement.

Item_sum_max/Item_sum_min incorrectly set null_value flag and
attempt to get result in parent functions leads to crash.
This happens due to double evaluation of the function argumet.
First evaluation happens in the comparator and second one
happens in Item_cache::cache_value().
The fix is to introduce new Item_cache object which
holds result of the argument and use this cached value
as an argument of the comparator.

This bug fix requires that Bug #58912 be fixed as well (bzr revision id
marko.makela@oracle.com-20101221093919-mcmmgd4zpse9567d). Otherwise,
another double BLOB free could occur when InnoDB would try to perform
an update-in-place as delete-and-insert-by-update-in-place.

row_upd_clust_rec_by_insert(): Do not disown the externally stored
columns from the old record (btr_cur_mark_extern_inherited_fields())
until after checking the foreign key constraints and successfully
inserting the updated record. If a lock wait timeout occurs between
the delete-marking of the old record and the insertion of the updated
record, mark the columns inherited before retrying the insert.
Distinguish the state UPD_NODE_INSERT_BLOB from
UPD_NODE_INSERT_CLUSTERED.

btr_cur_del_mark_set_clust_rec(): Replace the cursor with
block,rec,index,offsets so that the offsets need not be recalculated.
Assert that rec is on a clustered index leaf page.

btr_cur_disown_inherited_fields(): Renamed from
btr_cur_mark_extern_inherited_fields(). Use
upd_get_field_by_field_no(). Assert that there are externally stored
columns. Assert that a mini-transaction is passed. Remove the return
status. (The only caller, row_upd_clust_rec_by_insert(), will have
determined that some fields have changed ownership.)

btr_cur_mark_dtuple_inherited_extern(): Rename to
row_upd_clust_rec_by_insert_inherit_func() and declare as static. Add
the debug parameters rec, offsets. When rec is given, assert that the
off-page columns match those in the inesrt tuple and that the off-page
columns are owned by the record. Assert that the non-updated off-page
columns in the insert tuple are owned, and mark them inherited.

row_upd_clust_rec_by_insert_inherit(): A wrapper macro for
row_upd_clust_rec_by_insert_inherit_func().

row_undo_mod_upd_exist_sec(): Adjust a comment about
row_upd_clust_rec_by_insert().

rb:508 approved by Jimmy Yang

row_upd_changes_ord_field_binary(): Do not return TRUE if the update
vector changes a column that is covered by a prefix index, but does
not change the column prefix. Add the row_ext_t parameter for
determining whether the prefixes of externally stored columns match.

dfield_datas_are_binary_equal(): Add the parameter len, for comparing
column prefixes when len > 0.

innodb.test: Add a test case where the patch of Bug #55284 failed
without this fix.

rb:537 approved by Jimmy Yang

Normally, auto_increment value is generated for the column by
inserting either NULL or 0 into it. NO_AUTO_VALUE_ON_ZERO
suppresses this behavior for 0 so that only NULL generates
the auto_increment value. This behavior is also followed by
a slave, specifically by the SQL Thread, when applying events
in the statement format from a master. However, when applying
events in the row format, the flag was ignored thus causing
an assertion failure:
"Assertion failed: next_insert_id == 0, file .\handler.cc"

In fact, we never need to generate a auto_increment value for
the column when applying events in row format on slave. So we
don't allow it to happen by using 'MODE_NO_AUTO_VALUE_ON_ZERO'.

Refactoring: Get rid of all the sql_mode checks to rows_log_event
when applying it for avoiding problems caused by the inconsistency
of the sql_mode on slave and master as the sql_mode is not set for
Rows_log_event.

Problem: Warnings for truncated data were generated on hosts with
long host names because @@hostname was inserted into a CHAR(40) column.
Fix: Change CHAR(40) to TEXT.

Major replication test framework cleanup. This does the following:
 - Ensure that all tests clean up the replication state when they
   finish, by making check-testcase check the output of SHOW SLAVE STATUS.
   This implies:
    - Slave must not be running after test finished. This is good
      because it removes the risk for sporadic errors in subsequent
      tests when a test forgets to sync correctly.
    - Slave SQL and IO errors must be cleared when test ends. This is
      good because we will notice if a test gets an unexpected error in
      the slave threads near the end.
    - We no longer have to clean up before a test starts.
 - Ensure that all tests that wait for an error in one of the slave
   threads waits for a specific error. It is no longer possible to
   source wait_for_slave_[sql|io]_to_stop.inc when there is an error
   in one of the slave threads. This is good because:
    - If a test expects an error but there is a bug that causes
      another error to happen, or if it stops the slave thread without
      an error, then we will notice.
    - When developing tests, wait_for_*_to_[start|stop].inc will fail
      immediately if there is an error in the relevant slave thread.
      Before this patch, we had to wait for the timeout.
 - Remove duplicated and repeated code for setting up unusual replication
   topologies. Now, there is a single file that is capable of setting
   up arbitrary topologies (include/rpl_init.inc, but
   include/master-slave.inc is still available for the most common
   topology). Tests can now end with include/rpl_end.inc, which will clean
   up correctly no matter what topology is used. The topology can be
   changed with include/rpl_change_topology.inc.
 - Improved debug information when tests fail. This includes:
    - debug info is printed on all servers configured by include/rpl_init.inc
    - User can set $rpl_debug=1, which makes auxiliary replication files
      print relevant debug info.
 - Improved documentation for all auxiliary replication files. Now they
   describe purpose, usage, parameters, and side effects.
 - Many small code cleanups:
    - Made have_innodb.inc output a sensible error message.
    - Moved contents of rpl000017-slave.sh into rpl000017.test
    - Added mysqltest variables that expose the current state of
      disable_warnings/enable_warnings and friends.
    - Too many to list here: see per-file comments for details.

Post-push fixes:

  - fixed platform dependent result files
  - appeasing valgrind warnings:
   
    Fault injection was also uncovering a previously existing 
    potential mem leaks. For BUG#46166 testing purposes, fixed 
    by forcing handling the leak when injecting faults.

Merging to latest mysql-5.1-bugteam.