- During shutdown, InnoDB fts fails to update synced doc id
when there is only one doc id about to sync. While starting
the server, InnoDB fetches the already synced doc id from
config table. In the subsequent sync operation, InnoDB fails
with DB_DUPLICATE_KEY error.

The replication unsafe warning's pattern gets corrected in the
punctuation part.

MDEV-28530: Revoking privileges from a non-existing user on a master breaks replication on the slave in the presence of replication filters

Problem:
========
Replication can break while applying a query log event if its
respective command errors on the primary, but is ignored by the
replication filter within Grant_tables on the replica. The bug
reported by MDEV-28530 shows this with REVOKE ALL PRIVILEGES using a
non-existent user. The primary will binlog the REVOKE command with
an error code, and the replica will think the command executed with
success because the replication filter will ignore the command while
accessing the Grant_tables classes. When the replica performs an
error check, it sees the difference between the error codes, and
replication breaks.

Solution:
========
If the replication filter check done by Grant_tables logic ignores
the tables, reset thd->slave_expected_error to 0 so that
Query_log_event::do_apply_event() can be made aware that the
underlying query was ignored when it compares errors.

Note that this bug also effects DROP USER if not all users exist
in the provided list, and the patch fixes and tests this case.

Reviewed By:
============
andrei.elkin@mariadb.com

Spider converts HA_READ_KEY_EXACT to the equality (=) in the
function spider_db_append_key_where_internal() but the conversion
is not necessarily correct for tables with prefix indices.

We fix the bug by converting HA_READ_KEY_EXACT to 'LIKE "foo%"' when
a target key is a prefix key. The fix is partly inspired by FEDERATED.
See ha_federated::create_where_from_key() for more details.

Making changes to wsrep_mysqld.h causes large parts of server code to
be recompiled. The reason is that wsrep_mysqld.h is included by
sql_class.h, even tough very little of wsrep_mysqld.h is needed in
sql_class.h. This commit introduces a new header file, wsrep_on.h,
which is meant to be included from sql_class.h, and contains only
macros and variable declarations used to determine whether wsrep is
enabled.
Also, header wsrep.h should only contain definitions that are also
used outside of sql/. Therefore, move WSREP_TO_ISOLATION* and
WSREP_SYNC_WAIT macros to wsrep_mysqld.h.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>

Thanks to references from Brad Smith, BSDs use getmntinfo as
a system call for mounted filesystems.

Most BSDs return statfs structures, (and we use OSX's statfs64),
but NetBSD uses a statvfs structure.

Simplify Linux getmntent_r to just use getmntent.

AIX uses getmntent.

An attempt at writing Solaris compatibility with
a small bit of HPUX compatibility was made based on man page
entries only. Fixes welcome.

statvfs structures now use f_bsize for consistency with statfs

Test case adjusted as PATH_MAX is OS defined (e.g. 1023 on AIX)

Fixes: 0ee5cf83

also fixes:

MDEV-27818: Disk plugin does not show zpool mounted devices

This is because zpool mounted point don't begin with /.

Due to the proliferation of multiple filesystem types since this
was written, we restrict the entries listed in the disks plugin
to excude:
* read only mount points (no point monitoring, and
  includes squash, snaps, sysfs, procfs, cgroups...)
* mount points that aren't directories (excludes /etc/hostname and
  similar mounts in containers). (getmntent (Linux/AIX) only)
* exclude systems where there is no capacity listed (excludes various
  virtual filesystem types).

Reviewer: Sergei Golubchik

Add ORDER BY to make the test deterministic.

Add FLUSH TABLES to avoid crash recovery warnings about the table
mysql.plugin. This tends to occur on Valgrind, where the server
shutdown could presumably time out, resulting in a forced kill.

dict_table_rename_in_cache(), dict_table_get_highest_foreign_id():
Reserve sufficient space for the fkid[] buffer, and ensure that the
fkid[] will be NUL-terminated.

The fkid[] must accommodate both the database name (which is already
encoded in my_charset_filename) and the constraint name
(which must be converted to my_charset_filename) so that we can check
if it is in the format databasename/tablename_ibfk_1 (all encoded in
my_charset_filename).

trx_undo_page_report_rename(): Use the correct maximum length of
a table name. Both the database name and the table name can be up to
NAME_CHAR_LEN (64 characters) times 5 bytes per character in the
my_charset_filename encoding. They are not encoded in UTF-8!

fil_op_write_log(): Reserve the correct amount of log buffer for
a rename operation. The file name will be appended by
mlog_catenate_string().

rename_file_ext(): Reserve a large enough buffer for the file names.

take into account C/C specific CR_ERR_NET_WRITE error

MDEV-18873 Server crashes in Compare_identifiers::operator or in my_strcasecmp_utf8 upon ADD PERIOD IF NOT EXISTS with empty name

empty identifier specified as `` ends up with a NULL LEX_CSTRING::str in lexer.
This is not considered correct in upper layers, for example in Compare_identifiers::operator().
Empty column name is usually avoided by a check_column_name() call while parsing,
and period name matches the column name completely.
Hence, this fix uses the mentioned call for verification, too.

This bug affected some queries with an IN/ALL/ANY predicand or an EXISTS
predicate whose subquery contained a GROUP BY clause that could be
eliminated. If this clause used a IN/ALL/ANY predicand whose left operand
was a single-value subquery then execution of the query caused a crash of
the server after invokation of remove_redundant_subquery_clauses().
The crash was caused by an attempt to exclude the unit for the single-value
subquery from the query tree for the second time by the function
Item_subselect::eliminate_subselect_processor().

This bug had been masked by the bug MDEV-28617 until a fix for the latter
that properly excluded units was pushed into 10.3.

Approved by Oleksandr Byelkin <sanja@mariadb.com>

buf_defer_drop_ahi(): Remove. Ever since
commit c7f8cfc9 (MDEV-27700)
it is safe to invoke btr_search_drop_page_hash_index(block, true)
to remove an orphan adaptive hash index.

Any attempt to upgrade page latches is prone to deadlocks. Recently,
we observed a few hangs that involved nothing more than a small table
consisting of one clustered index page, one secondary index page and
some undo pages.

followup for "remove invalid options from warning messages"

MDEV-29319 Assertion failure size_in_header >= space.free_limit in fsp_get_available_space_in_free_extents()

- Don't remove the constant parameter in fsp_get_available_space_in_free_extents()

- InnoDB fts table initially added to LRU table cache
while creating the table. Later, table was marked
as non-evicted when we add the table to fts optimizer
list. Before marking the table as non-evicted, master
thread can try to evict the fts table.

MDEV-29319 Assertion failure size_in_header >= space.free_limit in fsp_get_available_space_in_free_extents()

- Race condition between fsp_get_available_space_in_free_extents()
and fsp_try_extend_data_file() while accessing space.free_limit.
Before calling fsp_get_available_space_in_free_extents(), take
shared lock on space->latch.

Many Spider tests were broken by the merge commit, 36d173e5.

Problem:
========
When replicating SET DEFAULT ROLE, the pre-update check (i.e. that
in set_var_default_role::check()) tries to validate the existence of
the given rules/user even when the targeted tables are ignored. When
previously issued CREATE USER/ROLE commands are ignored by the
replica because of the replication filtering rules, this results in
an error because the targeted data does not exist.

Solution:
========
Before checking that the given roles/user exist of a SET DEFAULT
ROLE command, first ensure that the mysql.user and
mysql.roles_mapping tables are not excluded by replication filters.

Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>
Sergei Golubchik <serg@mariadb.com>

Reason:
=======
Race condition between btr_search_drop_hash_index() and
btr_search_lazy_free(). One thread does resizing of buffer pool
and clears the ahi on all pages in the buffer pool, frees the
index and table while removing the last reference. At the same time,
other thread access index->heap in btr_search_drop_hash_index().

Solution:
=========
Acquire the respective ahi latch before checking index->freed()

btr_search_drop_page_hash_index(): Added new parameter to indicate
that drop ahi entries only if the index is marked as freed

btr_search_check_marked_free_index(): Acquire all ahi latches and
return true if the index was freed

TIMESTAMP columns were compared as strings in ALL/ANY comparison,
which did not work well near DST time change.

Changing ALL/ANY comparison to use "Native" representation to compare
TIMESTAMP columns, like simple comparison does.

Ever since commit 09177ead
the test innodb.row_format_redundant cannot work when the
data file was created with innodb_checksum_algorithm=full_crc32.

Backport of 10.5 commit a9d0bb12

Even though commit b817afaa passed
the test mariabackup.compress_qpress, that test turned out to be
too small to reveal one more problem that had previously been prevented
by the existence of ctrl_mutex. I did not realize that there can be
multiple concurrent callers to compress_write(). One of them is the
log copying thread; further callers are data file copying threads
(default: --parallel=1).

By default, there is only one compression worker thread
(--compress-threads=1).

compress_write(): Fix a race condition between threads that would
use the same worker thread object. Make thd->data_avail contain the
thread identifier of the submitter, and add thd->avail_cond to
notify other compress_write() threads that are waiting for a slot.

   - While creating a new InnoDB segment, allocates the extent
before allocating the inode or page allocation even though
the pages are present in fragment segment. This patch does
reserve the extent when InnoDB ran out of fragment pages
in the tablespace.

ha_spider::field_exchange() returns NULL and that results in a crash
or a assertion failure in spider_db_open_item_ident().

In the first place, there seems to be no need to call field_exchange()
for printing an identity (column name with alias). Thus, we simply
remove the call.

Analysis: JSON_VALUE() returns "null" string instead of NULL pointer.
Fix: When the type is JSON_VALUE_NULL (which is also a scalar) set
null_value to true and return 0 instead of returning string.