into  mysql.com:/home/matthias/Arbeit/mysql-4.1/src-1

into  mysql.com:/home/stewart/Documents/MySQL/4.1/merge


ndb/src/kernel/blocks/ndbcntr/NdbcntrInit.cpp:
  Auto merged

into  mysql.com:/home/stewart/Documents/MySQL/4.1/merge

into moonbone.local:/work/14169-bug-4.1-mysql

into  mysql.com:/usr/home/bar/mysql-4.1.b18691

MySQL 4.1
  and Bug#16920 rpl_deadlock_innodb fails in show slave status (reported for MySQL 5.1)
  - backport of several fixes done in MySQL 5.0 to 4.1
  - fix for new discovered instability (see comment on Bug#12429 + Bug#16920)
  - reenabling of testcases


mysql-test/r/rpl_deadlock.result:
  Updated results
mysql-test/r/rpl_relayrotate.result:
  Updated results
mysql-test/t/disabled.def:
  Reenabling of tests
mysql-test/t/rpl_deadlock.test:
  - replace sleep with real_sleep (backport fix for Bug#15624 MySQL 5.0)
  - egalized value for Slave_IO_Running 
  - line 105 (backport fix for Bug#12429 MySQL 5.0)
  - line 85 (see comment in Bug#12429 
             + Bug#16920 rpl_deadlock_innodb fails in show slave status)
  - improve readability of show slave status output (--vertical_results)
mysql-test/t/rpl_relayrotate.test:
  - Replace select ... with select max(a)
  - add sync_with_master (backport fix done by Kristian in MySQL 5.0 because of timing
    problems similar to Bug#15624)
mysql-test/t/rpl_until.test:
  Add wait_for_slave_to_stop like in the current MySQL 5.0 version of this test.
  I assume this makes the test results more predictable.

into  april.(none):/home/svoj/devel/mysql/BUG17917/mysql-4.1

sql/mysqld.cc:
  Fix a typo.

into  april.(none):/home/svoj/devel/mysql/BUG17917/mysql-4.1

Retrieving data from compressed MyISAM table which is bigger than 4G on 32-bit box
with mmap() support results in server crash.

mmap() accepts length of bytes to be mapped in second param, which is 32-bit
size_t. But we pass data_file_length, which is 64-bit my_off_t. As a result only
first data_file_length % 4G were mapped.

This fix adds additional condition for mmap() usage, that is use mmap() for
compressed table which size is no more than 4G on 32-bit platform.


myisam/mi_packrec.c:
  Use mmap() for compressed table which size is no more than 4G on 32-bit platform.

Conversion from int and real numbers to UCS2 didn't work fine: 
CONVERT(100, CHAR(50) UNICODE)
CONVERT(103.9, CHAR(50) UNICODE)

The problem appeared because numbers have binary charset, so,
simple charset recast binary->ucs2 was performed
instead of real conversion.

Fixed to make numbers pretend to be non-binary.


mysql-test/r/ctype_ucs.result:
  Adding test case
mysql-test/t/ctype_ucs.test:
  Adding test case
sql/item_timefunc.cc:
  Adding new member from_cs, to replace my_charset_bin
  to a non-binary charset when converting from numbers to UCS2
sql/item_timefunc.h:
  Adding new member from_cs, to replace my_charset_bin
  to a non-binary charset when converting from numbers to UCS2

used

In a simple queries a result of the GROUP_CONCAT() function was always of 
varchar type.
But if length of GROUP_CONCAT() result is greater than 512 chars and temporary
table is used during select then the result is converted to blob, due to
policy to not to store fields longer than 512 chars in tmp table as varchar
fields.

In order to provide consistent behaviour, result of GROUP_CONCAT() now
will always be converted to blob if it is longer than 512 chars.
Item_func_group_concat::field_type() is modified accordingly.


mysql-test/t/func_gconcat.test:
  Added test case for bug#14169: type of group_concat() result changed to blob if tmp_table was used
mysql-test/r/func_gconcat.result:
  Added test case for bug#14169: type of group_concat() result changed to blob if tmp_table was used
sql/unireg.h:
  Added the CONVERT_IF_BIGGER_TO_BLOB constant
sql/sql_select.cc:
  Fixed bug#14169: type of group_concat() result changed to blob if tmp_table was used
  The unnamed constant 255 in the create_tmp_field() and create_tmp_field_from_item() functions now defined as the CONVERT_IF_BIGGER_TO_BLOB constant.
  The create_tmp_field() function now converts the Item_sum string result to a blob field based on its char length.
sql/item_sum.h:
  Fixed bug#14169: type of group_concat() result changed to blob if tmp_table was used
  To the Item_func_group_concat calls added the member function field_type() which returns the BLOB or VAR_STRING type based on the items length.
sql/item_func.cc:
  Fixed bug#14169: type of group_concat() result changed to blob if tmp_table was used
  In the Item_func::tmp_table_field() function the unnamed constant 255 is changed to the CONVERT_IF_BIGGER_TO_BLOB constant.
  The Item_func::tmp_table_field() function now measures the result length in chars rather than bytes when converting string result to a blob.

into  mysql.com:/home/mydev/mysql-4.1-bug5390

into  mysql.com:/home/mydev/mysql-4.1-bug5390

into  sanja.is.com.ua:/home/bell/mysql/bk/work-4.1


acinclude.m4:
  Auto merged
configure.in:
  Auto merged

into  mysql.com:/usr/home/ram/work/mysql-4.1


mysql-test/r/func_op.result:
  Auto merged
sql/item_func.cc:
  Auto merged
mysql-test/t/func_op.test:
  SCCS merged

into  sanja.is.com.ua:/home/bell/mysql/bk/work-4.0

into  mysql.com:/usr/home/ram/work/mysql-4.0

into  sanja.is.com.ua:/home/bell/mysql/bk/work-4.0

code. (Bug #13621)


configure.in:
  Test whether atomic_add() and atomic_sub() are available in C++
  code, since that is primarily where we will be using them.

into  mysql.com:/usr/local/mysql/mysql-4.1

into  perch.ndb.mysql.com:/home/jonas/src/mysql-4.1

into  mysql.com:/usr/local/mysql/mysql-4.1

acinclude.m4:
  Check tinfo library presence and use it.

into  mysql.com:/opt/local/work/mysql-4.1-16365


sql/mysql_priv.h:
  Auto merged
sql/sql_class.h:
  Auto merged
mysql-test/r/ps.result:
  Manual merge
mysql-test/t/ps.test:
  Manual merge

too many open statements". The patch adds a new global variable
@@max_prepared_stmt_count. This variable limits the total number
of prepared statements in the server. The default value of
@@max_prepared_stmt_count is 16382. 16382 small statements
(a select against 3 tables with GROUP, ORDER and LIMIT) consume 
100MB of RAM. Once this limit has been reached, the server will 
refuse to prepare a new statement and return ER_UNKNOWN_ERROR 
(unfortunately, we can't add new errors to 4.1 without breaking 5.0). The limit is changeable after startup
and can accept any value from 0 to 1 million. In case
the new value of the limit is less than the current
statement count, no new statements can be added, while the old
still can be used. Additionally, the current count of prepared 
statements is now available through a global read-only variable 
@@prepared_stmt_count.


mysql-test/r/ps.result:
  Test results fixed (a test case for Bug#16365)
mysql-test/t/ps.test:
  A test case for Bug#16365 "Prepared Statements: DoS with too many 
  open statements". Also fix statement leaks in other tests.
sql/mysql_priv.h:
  Add declarations for new global variables.
sql/mysqld.cc:
  Add definitions of max_prepared_stmt_count, prepared_stmt_count.
sql/set_var.cc:
  Implement support for @@prepared_stmt_count and 
  @@max_prepared_stmt_count. Currently these variables are queried
  without acquiring LOCK_prepared_stmt_count due to limitations of
  the set_var/sys_var class design. Updates are, however, protected 
  with a lock.
sql/set_var.h:
  New declarations to add support for @@max_prepared_stmt_count.
  Implement a new class, where the lock to be used when updating
  a variable is a parameter.
sql/sql_class.cc:
  Add accounting of the total number of prepared statements in the
  server to the methods of Statement_map.
sql/sql_class.h:
  Add accounting of the total number of prepared statements in the
  server to the methods of Statement_map.
sql/sql_prepare.cc:
  Statement_map::insert will now send a message in case of an
  error.

into mysql.com:/M41/mtr-4.1

gives wrong results". Implement previously missing 
Item_row::cleanup. The bug is not repeatable in 5.0, probably 
due to a coincidence: the problem is present in 5.0 as well.


mysql-test/r/ps.result:
  Update the result file (Bug#16248)
mysql-test/t/ps.test:
  Add a test case for Bug#16248 "WHERE (col1,col2) IN ((?,?)) gives 
  wrong results"
sql/item_row.cc:
  Implement Item_row::cleanup(): we should reset used_tables_cache
  before reexecution of a prepared statement. In case ROW
  arguments contain a placeholder, used_tables_cache has PARAM_TABLE
  bit set in statement prepare. As a result, when executing a statement,
  the condition push down algorithm (make_cond_for_table) would think
  that the WHERE clause belongs to the non-existent PARAM_TABLE and
  wouldn't attach the WHERE clause to any of the real tables, 
  effectively optimizing the clause away.
sql/item_row.h:
  Remove a never used member 'array_holder'. Add declaration for
  Item_row::cleanup.

mysql-test/mysql-test-run.sh:
  Provide info about the options used for this run to any evaluation tool.

mysql-test/mysql-test-run.pl:
  Add option "with-ndbcluster-only" (ignored) for compatibility with newer "Do-compile".

mysql-test/lib/mtr_process.pl:
  Change from "mtr_error()" to "mtr_warning()" on some problems,
  because "error" makes the whole suite abort which then makes "Do-compile" terminate,
  so none of the following steps (including other etst suites) will be done.

mysql-test/mysql-test-run.sh:
  Manual merge from 4.0 (which was a 5.1 backport):
  "--with-ndbcluster" is already present,
  "--with-ndbcluster-only" is really usable here.

into  perch.ndb.mysql.com:/home/jonas/src/41-work

mysql-test/mysql-test-run.sh:
  Make "mysql-test-run.sh" accept (and ignore) the options "--with-ndbcluster" 
  and "--with-ndbcluster-only".
  This is necessary because newer build tools will issue them, and the test 
  script should tolerate that.
  Backport from 5.1 (Tomas Ulin, 2006-01-17)

  1) make sure that check_multi_node_shutdown does not proceed (in stop case)
  2) Fix printout


ndb/src/kernel/blocks/qmgr/Qmgr.hpp:
  make sure that check_multi_node_shutdown does not proceed (in stop case)
ndb/src/kernel/blocks/qmgr/QmgrMain.cpp:
  make sure that check_multi_node_shutdown does not proceed (in stop case)

ndb/src/kernel/SimBlockList.cpp:
  NEW_BLOCK allocates the elements with new, we should free them with delete
  but only if we're not building with VM_TRACE

ndb/src/kernel/blocks/ndbcntr/NdbcntrInit.cpp:
  Also init a few internals before start phase 1 as they can be accessed before that