Duplicating lines removed from the debian script.

Case-sensitive compare to detect column name case change in inplace
alter rename.

Debian scripts fixed.

In commit 7cffb5f6 we changed the
interface of buf_page_create() so that the free_block is allocated
by the caller. Both calls to buf_LRU_block_free_non_file_page()
should have been removed.

This caused an assertion failure 'block->page.state() == BUF_BLOCK_MEMORY'
in buf_LRU_block_free_non_file_page().

The bug only affected ROW_FORMAT=COMPRESSED pages.

After commit abb678b6
(a follow-up fix to MDEV-19514 to prevent potential hangs)
and MDEV-23399, the probability for hitting a dormant bug
that is related to MDEV-19514 was increased.

buf_page_create(): Call ibuf_merge_or_delete_for_page() also
when reusing a previously freed page.

Reviewed by: Thirunarayanan Balathandayuthapani

We forgot to change innodb_autoextend_increment from ULONG to
UINT (always 32-bit) in Mariabackup.

InnoDB stores a 32-bit page number in page headers and in some
data structures, such as FIL_ADDR (consisting of a 32-bit page number
and a 16-bit byte offset within a page). For better compile-time
error detection and to reduce the memory footprint in some data
structures, let us use a uint32_t for the page number, instead
of ulint (size_t) which can be 64 bits.

False positives for buf_page_t::ibuf_exist are acceptable,
because it does not hurt to unnecessarily invoke
ibuf_merge_or_delete_for_page().

Invoking buf_page_get_gen() in a read completion function
is a definite no-no, because it could trigger a page flush
or cause the server to run out of buffer pool.

With some MDEV-23855 changes present, the test innodb.purge_secondary
occasionally failed due to the table having been dropped while
ibuf_page_exists() invoked buf_page_get_gen().

Reviewed by: Thirunarayanan Balathandayuthapani

The buffer pool refactoring in MDEV-15053 and MDEV-22871 shifted
the performance bottleneck to the page flushing.

The configuration parameters will be changed as follows:

innodb_lru_flush_size=32 (new: how many pages to flush on LRU eviction)
innodb_lru_scan_depth=1536 (old: 1024)
innodb_max_dirty_pages_pct=90 (old: 75)
innodb_max_dirty_pages_pct_lwm=75 (old: 0)

Note: The parameter innodb_lru_scan_depth will only affect LRU
eviction of buffer pool pages when a new page is being allocated. The
page cleaner thread will no longer evict any pages. It used to
guarantee that some pages will remain free in the buffer pool. Now, we
perform that eviction 'on demand' in buf_LRU_get_free_block().
The parameter innodb_lru_scan_depth(srv_LRU_scan_depth) is used as follows:
 * When the buffer pool is being shrunk in buf_pool_t::withdraw_blocks()
 * As a buf_pool.free limit in buf_LRU_list_batch() for terminating
   the flushing that is initiated e.g., by buf_LRU_get_free_block()
The parameter also used to serve as an initial limit for unzip_LRU
eviction (evicting uncompressed page frames while retaining
ROW_FORMAT=COMPRESSED pages), but now we will use a hard-coded limit
of 100 or unlimited for invoking buf_LRU_scan_and_free_block().

The status variables will be changed as follows:

innodb_buffer_pool_pages_flushed: This includes also the count of
innodb_buffer_pool_pages_LRU_flushed and should work reliably,
updated one by one in buf_flush_page() to give more real-time
statistics. The function buf_flush_stats(), which we are removing,
was not called in every code path. For both counters, we will use
regular variables that are incremented in a critical section of
buf_pool.mutex. Note that show_innodb_vars() directly links to the
variables, and reads of the counters will *not* be protected by
buf_pool.mutex, so you cannot get a consistent snapshot of both variables.

The following INFORMATION_SCHEMA.INNODB_METRICS counters will be
removed, because the page cleaner no longer deals with writing or
evicting least recently used pages, and because the single-page writes
have been removed:
* buffer_LRU_batch_flush_avg_time_slot
* buffer_LRU_batch_flush_avg_time_thread
* buffer_LRU_batch_flush_avg_time_est
* buffer_LRU_batch_flush_avg_pass
* buffer_LRU_single_flush_scanned
* buffer_LRU_single_flush_num_scan
* buffer_LRU_single_flush_scanned_per_call

When moving to a single buffer pool instance in MDEV-15058, we missed
some opportunity to simplify the buf_flush_page_cleaner thread. It was
unnecessarily using a mutex and some complex data structures, even
though we always have a single page cleaner thread.

Furthermore, the buf_flush_page_cleaner thread had separate 'recovery'
and 'shutdown' modes where it was waiting to be triggered by some
other thread, adding unnecessary latency and potential for hangs in
relatively rarely executed startup or shutdown code.

The page cleaner was also running two kinds of batches in an
interleaved fashion: "LRU flush" (writing out some least recently used
pages and evicting them on write completion) and the normal batches
that aim to increase the MIN(oldest_modification) in the buffer pool,
to help the log checkpoint advance.

The buf_pool.flush_list flushing was being blocked by
buf_block_t::lock for no good reason. Furthermore, if the FIL_PAGE_LSN
of a page is ahead of log_sys.get_flushed_lsn(), that is, what has
been persistently written to the redo log, we would trigger a log
flush and then resume the page flushing. This would unnecessarily
limit the performance of the page cleaner thread and trigger the
infamous messages "InnoDB: page_cleaner: 1000ms intended loop took 4450ms.
The settings might not be optimal" that were suppressed in
commit d1ab8903 unless log_warnings>2.

Our revised algorithm will make log_sys.get_flushed_lsn() advance at
the start of buf_flush_lists(), and then execute a 'best effort' to
write out all pages. The flush batches will skip pages that were modified
since the log was written, or are are currently exclusively locked.
The MDEV-13670 message "page_cleaner: 1000ms intended loop took" message
will be removed, because by design, the buf_flush_page_cleaner() should
not be blocked during a batch for extended periods of time.

We will remove the single-page flushing altogether. Related to this,
the debug parameter innodb_doublewrite_batch_size will be removed,
because all of the doublewrite buffer will be used for flushing
batches. If a page needs to be evicted from the buffer pool and all
100 least recently used pages in the buffer pool have unflushed
changes, buf_LRU_get_free_block() will execute buf_flush_lists() to
write out and evict innodb_lru_flush_size pages. At most one thread
will execute buf_flush_lists() in buf_LRU_get_free_block(); other
threads will wait for that LRU flushing batch to finish.

To improve concurrency, we will replace the InnoDB ib_mutex_t and
os_event_t native mutexes and condition variables in this area of code.
Most notably, this means that the buffer pool mutex (buf_pool.mutex)
is no longer instrumented via any InnoDB interfaces. It will continue
to be instrumented via PERFORMANCE_SCHEMA.

For now, both buf_pool.flush_list_mutex and buf_pool.mutex will be
declared with MY_MUTEX_INIT_FAST (PTHREAD_MUTEX_ADAPTIVE_NP). The critical
sections of buf_pool.flush_list_mutex should be shorter than those for
buf_pool.mutex, because in the worst case, they cover a linear scan of
buf_pool.flush_list, while the worst case of a critical section of
buf_pool.mutex covers a linear scan of the potentially much longer
buf_pool.LRU list.

mysql_mutex_is_owner(), safe_mutex_is_owner(): New predicate, usable
with SAFE_MUTEX. Some InnoDB debug assertions need this predicate
instead of mysql_mutex_assert_owner() or mysql_mutex_assert_not_owner().

buf_pool_t::n_flush_LRU, buf_pool_t::n_flush_list:
Replaces buf_pool_t::init_flush[] and buf_pool_t::n_flush[].
The number of active flush operations.

buf_pool_t::mutex, buf_pool_t::flush_list_mutex: Use mysql_mutex_t
instead of ib_mutex_t, to have native mutexes with PERFORMANCE_SCHEMA
and SAFE_MUTEX instrumentation.

buf_pool_t::done_flush_LRU: Condition variable for !n_flush_LRU.

buf_pool_t::done_flush_list: Condition variable for !n_flush_list.

buf_pool_t::do_flush_list: Condition variable to wake up the
buf_flush_page_cleaner when a log checkpoint needs to be written
or the server is being shut down. Replaces buf_flush_event.
We will keep using timed waits (the page cleaner thread will wake
_at least_ once per second), because the calculations for
innodb_adaptive_flushing depend on fixed time intervals.

buf_dblwr: Allocate statically, and move all code to member functions.
Use a native mutex and condition variable. Remove code to deal with
single-page flushing.

buf_dblwr_check_block(): Make the check debug-only. We were spending
a significant amount of execution time in page_simple_validate_new().

flush_counters_t::unzip_LRU_evicted: Remove.

IORequest: Make more members const. FIXME: m_fil_node should be removed.

buf_flush_sync_lsn: Protect by std::atomic, not page_cleaner.mutex
(which we are removing).

page_cleaner_slot_t, page_cleaner_t: Remove many redundant members.

pc_request_flush_slot(): Replaces pc_request() and pc_flush_slot().

recv_writer_thread: Remove. Recovery works just fine without it, if we
simply invoke buf_flush_sync() at the end of each batch in
recv_sys_t::apply().

recv_recovery_from_checkpoint_finish(): Remove. We can simply call
recv_sys.debug_free() directly.

srv_started_redo: Replaces srv_start_state.

SRV_SHUTDOWN_FLUSH_PHASE: Remove. logs_empty_and_mark_files_at_shutdown()
can communicate with the normal page cleaner loop via the new function
flush_buffer_pool().

buf_flush_remove(): Assert that the calling thread is holding
buf_pool.flush_list_mutex. This removes unnecessary mutex operations
from buf_flush_remove_pages() and buf_flush_dirty_pages(),
which replace buf_LRU_flush_or_remove_pages().

buf_flush_lists(): Renamed from buf_flush_batch(), with simplified
interface. Return the number of flushed pages. Clarified comments and
renamed min_n to max_n. Identify LRU batch by lsn=0. Merge all the functions
buf_flush_start(), buf_flush_batch(), buf_flush_end() directly to this
function, which was their only caller, and remove 2 unnecessary
buf_pool.mutex release/re-acquisition that we used to perform around
the buf_flush_batch() call. At the start, if not all log has been
durably written, wait for a background task to do it, or start a new
task to do it. This allows the log write to run concurrently with our
page flushing batch. Any pages that were skipped due to too recent
FIL_PAGE_LSN or due to them being latched by a writer should be flushed
during the next batch, unless there are further modifications to those
pages. It is possible that a page that we must flush due to small
oldest_modification also carries a recent FIL_PAGE_LSN or is being
constantly modified. In the worst case, all writers would then end up
waiting in log_free_check() to allow the flushing and the checkpoint
to complete.

buf_do_flush_list_batch(): Clarify comments, and rename min_n to max_n.
Cache the last looked up tablespace. If neighbor flushing is not applicable,
invoke buf_flush_page() directly, avoiding a page lookup in between.

buf_flush_space(): Auxiliary function to look up a tablespace for
page flushing.

buf_flush_page(): Defer the computation of space->full_crc32(). Never
call log_write_up_to(), but instead skip persistent pages whose latest
modification (FIL_PAGE_LSN) is newer than the redo log. Also skip
pages on which we cannot acquire a shared latch without waiting.

buf_flush_try_neighbors(): Do not bother checking buf_fix_count
because buf_flush_page() will no longer wait for the page latch.
Take the tablespace as a parameter, and only execute this function
when innodb_flush_neighbors>0. Avoid repeated calls of page_id_t::fold().

buf_flush_relocate_on_flush_list(): Declare as cold, and push down
a condition from the callers.

buf_flush_check_neighbor(): Take id.fold() as a parameter.

buf_flush_sync(): Ensure that the buf_pool.flush_list is empty,
because the flushing batch will skip pages whose modifications have
not yet been written to the log or were latched for modification.

buf_free_from_unzip_LRU_list_batch(): Remove redundant local variables.

buf_flush_LRU_list_batch(): Let the caller buf_do_LRU_batch() initialize
the counters, and report n->evicted.
Cache the last looked up tablespace. If neighbor flushing is not applicable,
invoke buf_flush_page() directly, avoiding a page lookup in between.

buf_do_LRU_batch(): Return the number of pages flushed.

buf_LRU_free_page(): Only release and re-acquire buf_pool.mutex if
adaptive hash index entries are pointing to the block.

buf_LRU_get_free_block(): Do not wake up the page cleaner, because it
will no longer perform any useful work for us, and we do not want it
to compete for I/O while buf_flush_lists(innodb_lru_flush_size, 0)
writes out and evicts at most innodb_lru_flush_size pages. (The
function buf_do_LRU_batch() may complete after writing fewer pages if
more than innodb_lru_scan_depth pages end up in buf_pool.free list.)
Eliminate some mutex release-acquire cycles, and wait for the LRU
flush batch to complete before rescanning.

buf_LRU_check_size_of_non_data_objects(): Simplify the code.

buf_page_write_complete(): Remove the parameter evict, and always
evict pages that were part of an LRU flush.

buf_page_create(): Take a pre-allocated page as a parameter.

buf_pool_t::free_block(): Free a pre-allocated block.

recv_sys_t::recover_low(), recv_sys_t::apply(): Preallocate the block
while not holding recv_sys.mutex. During page allocation, we may
initiate a page flush, which in turn may initiate a log flush, which
would require acquiring log_sys.mutex, which should always be acquired
before recv_sys.mutex in order to avoid deadlocks. Therefore, we must
not be holding recv_sys.mutex while allocating a buffer pool block.

BtrBulk::logFreeCheck(): Skip a redundant condition.

row_undo_step(): Do not invoke srv_inc_activity_count() for every row
that is being rolled back. It should suffice to invoke the function in
trx_flush_log_if_needed() during trx_t::commit_in_memory() when the
rollback completes.

sync_check_enable(): Remove. We will enable innodb_sync_debug from the
very beginning.

Reviewed by: Vladislav Vaintroub

Normally, buf_pool.flush_list must be sorted by
buf_page_t::oldest_modification, so that log_checkpoint()
can choose MIN(oldest_modification) as the checkpoint LSN.

During recovery, buf_pool.flush_rbt used to guarantee the
ordering. However, we can allow the buf_pool.flush_list to
be in an arbitrary order during recovery, and simply ensure
that it is in the correct order by the time a log checkpoint
needs to be executed.

recv_sys_t::apply(): To keep it simple, we will always flush the
buffer pool at the end of each batch.

Note that log_checkpoint() will invoke recv_sys_t::apply() in case
a checkpoint is initiated during the last batch of recovery,
when we already allow writes to data pages and the redo log.

Reviewed by: Vladislav Vaintroub

Recovery works just fine without a separate thread whose only
task is to tell the page cleaner thread to do its job.

recv_sys_t::apply(): Flush the buffer pool at the end of each batch.

Reviewed by: Vladislav Vaintroub

The debug data structure may have been useful during the development of
ROW_FORMAT=COMPRESSED page frames. Let us simplify code by removing it.

The merge commit 4d4865de
introduced fil_space_t::max_page_number_of_io() with no callers.

Simplify Travis-CI file and extend inline comments.

Upgrade to using Ubuntu 20.04 (Focal) as the baseline distro version
now that Travis-CI has made it available. Drop Xenial and all the
excess repositories Xenial needed. Now we only Focal and one Bionic
build to keep things simple and streamlined.

Keep GCC-7/Clang-7 as the older compiler, and start using GCC-10
and Clang-10 as the newer compiler. Assume that if both of them
build OK, than the intermediate versions would be OK as well.

Print 'apt-cache policy' to make it transparent in build logs what
repositories was used for build dependencies.

Remove temporary workaround from homebrew install step as Travis-CI has
fixed the original issue.

Revert ignoring results form build that previously failed on the test
main.thread_pool_info as MDEV-20372 is not fixed.

Keep arm64 failures ignored due to MDEV-23955.

Allow failures for the test main.column_compression 'innodb' due
to MDEV-23954.

innodb_preshutdown(): On innodb_fast_shutdown=0, only wait for
transactions to exit if the transaction system had been initialized.

Reviewed by: Vladislav Vaintroub

In MDEV-15053 (commit b1ab211d)
we inadvertently removed a check whether innodb_flush_neighbors is 0,
and thus started treating only the value 1 in a special way.

buf_flush_check_neighbors(): Add the parameter contiguous,
which can be set to skip the check for non-contiguous page number ranges.

Reviewed by: Thirunarayanan Balathandayuthapani

This was missed in commit 5155a300.

This was missed not only in
commit 5e62b6a5 but also in
commit a9550c47.

test_sql_service plugin added and employed in test_sql_service.test.

Remove stale references to srv_sys.sys_threads and srv_sys.mutex
that were removed in
commit 5e62b6a5.

We can simply use C++11 std::atomic for avoiding undefined behaviour
related to concurrent stores to a shared variable. On most if not all
ISAs, std::memory_order_relaxed loads and stores will not really
differ from non-atomic loads or stores.

In fts_optimize_remove_table(), InnoDB tries to access the
fts_optimize_wq after shutting down the fts optimize thread.
This issue caused by the commit a41d4297.
Fix should check for fts optimize thread shutdown state
before checking fts_optimize_wq.

LATCH_ID_OS_AIO_READ_MUTEX,
LATCH_ID_OS_AIO_WRITE_MUTEX,
LATCH_ID_OS_AIO_LOG_MUTEX,
LATCH_ID_OS_AIO_IBUF_MUTEX,
LATCH_ID_OS_AIO_SYNC_MUTEX: Remove. The tpool is not instrumented.

lock_set_timeout_event(): Remove.

srv_sys_mutex_key, srv_sys_t::mutex, SYNC_THREADS: Remove.

srv_slot_t::suspended: Remove. We only ever assigned this data member
true, so it is redundant.

ib_wqueue_wait(), ib_wqueue_timedwait(): Remove.

os_thread_join(): Remove.

os_thread_create(), os_thread_exit(): Remove redundant parameters.

These were missed in commit 5e62b6a5.