Converting the number zero to binary and back yielded the number zero,
but with no digits, i.e. zero precision.
This made the multiply algorithm go haywire in various ways.


include/decimal.h:
  Document struct st_decimal_t
mysql-test/r/type_newdecimal.result:
  New test case (valgrind warnings)
mysql-test/t/type_newdecimal.test:
  New test case (valgrind warnings)
sql/my_decimal.h:
  Remove the HAVE_purify enabled/disabled code.
strings/decimal.c:
  Make a proper zero, with non-zero precision.

The fix of Bug#12612184 broke crash recovery. When a record that
contains off-page columns (BLOBs) is updated, we must first write redo
log about the BLOB page writes, and only after that write the redo log
about the B-tree changes. The buggy fix would log the B-tree changes
first, meaning that after recovery, we could end up having a record
that contains a null BLOB pointer.

Because we will be redo logging the writes off the off-page columns
before the B-tree changes, we must make sure that the pages chosen for
the off-page columns are free both before and after the B-tree
changes. In this way, the worst thing that can happen in crash
recovery is that the BLOBs are written to free pages, but the B-tree
changes are not applied. The BLOB pages would correctly remain free in
this case. To achieve this, we must allocate the BLOB pages in the
mini-transaction of the B-tree operation. A further quirk is that BLOB
pages are allocated from the same file segment as leaf pages. Because
of this, we must temporarily "hide" any leaf pages that were freed
during the B-tree operation by "fake allocating" them prior to writing
the BLOBs, and freeing them again before the mtr_commit() of the
B-tree operation, in btr_mark_freed_leaves().

btr_cur_mtr_commit_and_start(): Remove this faulty function that was
introduced in the Bug#12612184 fix. The problem that this function was
trying to address was that when we did mtr_commit() the BLOB writes
before the mtr_commit() of the update, the new BLOB pages could have
overwritten clustered index B-tree leaf pages that were freed during
the update. If recovery applied the redo log of the BLOB writes but
did not see the log of the record update, the index tree would be
corrupted. The correct solution is to make the freed clustered index
pages unavailable to the BLOB allocation. This function is also a
likely culprit of InnoDB hangs that were observed when testing the
Bug#12612184 fix.

btr_mark_freed_leaves(): Mark all freed clustered index leaf pages of
a mini-transaction allocated (nonfree=TRUE) before storing the BLOBs,
or freed (nonfree=FALSE) before committing the mini-transaction.

btr_freed_leaves_validate(): A debug function for checking that all
clustered index leaf pages that have been marked free in the
mini-transaction are consistent (have not been zeroed out).

btr_page_alloc_low(): Refactored from btr_page_alloc(). Return the
number of the allocated page, or FIL_NULL if out of space. Add the
parameter "mtr_t* init_mtr" for specifying the mini-transaction where
the page should be initialized, or if this is a "fake allocation"
(init_mtr=NULL) by btr_mark_freed_leaves(nonfree=TRUE).

btr_page_alloc(): Add the parameter init_mtr, allowing the page to be
initialized and X-latched in a different mini-transaction than the one
that is used for the allocation. Invoke btr_page_alloc_low(). If a
clustered index leaf page was previously freed in mtr, remove it from
the memo of previously freed pages.

btr_page_free(): Assert that the page is a B-tree page and it has been
X-latched by the mini-transaction. If the freed page was a leaf page
of a clustered index, link it by a MTR_MEMO_FREE_CLUST_LEAF marker to
the mini-transaction.

btr_store_big_rec_extern_fields_func(): Add the parameter alloc_mtr,
which is NULL (old behaviour in inserts) and the same as local_mtr in
updates. If alloc_mtr!=NULL, the BLOB pages will be allocated from it
instead of the mini-transaction that is used for writing the BLOBs.

fsp_alloc_from_free_frag(): Refactored from
fsp_alloc_free_page(). Allocate the specified page from a partially
free extent.

fseg_alloc_free_page_low(), fseg_alloc_free_page_general(): Add the
parameter "mtr_t* init_mtr" for specifying the mini-transaction where
the page should be initialized, or NULL if this is a "fake allocation"
that prevents the reuse of a previously freed B-tree page for BLOB
storage. If init_mtr==NULL, try harder to reallocate the specified page
and assert that it succeeded.

fsp_alloc_free_page(): Add the parameter "mtr_t* init_mtr" for
specifying the mini-transaction where the page should be initialized.
Do not allow init_mtr == NULL, because this function is never to be
used for "fake allocations".

mtr_t: Add the operation MTR_MEMO_FREE_CLUST_LEAF and the flag
mtr->freed_clust_leaf for quickly determining if any
MTR_MEMO_FREE_CLUST_LEAF operations have been posted.

row_ins_index_entry_low(): When columns are being made off-page in
insert-by-update, invoke btr_mark_freed_leaves(nonfree=TRUE) and pass
the mini-transaction as the alloc_mtr to
btr_store_big_rec_extern_fields(). Finally, invoke
btr_mark_freed_leaves(nonfree=FALSE) to avoid leaking pages.

row_build(): Correct a comment, and add a debug assertion that a
record that contains NULL BLOB pointers must be a fresh insert.

row_upd_clust_rec(): When columns are being moved off-page, invoke
btr_mark_freed_leaves(nonfree=TRUE) and pass the mini-transaction as
the alloc_mtr to btr_store_big_rec_extern_fields(). Finally, invoke
btr_mark_freed_leaves(nonfree=FALSE) to avoid leaking pages.

buf_reset_check_index_page_at_flush(): Remove. The function
fsp_init_file_page_low() already sets
bpage->check_index_page_at_flush=FALSE.

There is a known issue in tablespace extension. If the request to
allocate a BLOB page leads to the tablespace being extended, crash
recovery could see BLOB writes to pages that are off the tablespace
file bounds. This should trigger an assertion failure in fil_io() at
crash recovery. The safe thing would be to write redo log about the
tablespace extension to the mini-transaction of the BLOB write, not to
the mini-transaction of the record update. However, there is no redo
log record for file extension in the current redo log format.

rb:693 approved by Sunny Bains

Background: Backporting fix for BUG 11752963 to Mysql5.1 branch.
Problem: Fix of bug 11752963 was only available for trunk and 5.5 branch.
Partial fix has been pushed to 5.1 branch as well. 
Fix: backporting the fixes of bug 11752963 to 5.1 branch. 
1. Made all major changes to make 5.1 branch in line with 5.5 and the trunk.
2. skipped the partial patch that was already applied to the 5.1 branch. 

sql/rpl_rli.h:
  Made inited Volatile (find inline comments)
sql/slave.cc:
  backported all changes from the fix of BUG#11752963.

Suppress the known warnings generated by filesort().

The real fix belongs to worklog 1509:
Pack values of non-sorted fields in the sort buffer
(which is basically the same issue, but in an optimization context:
 We are writing the entire sort buffer to disk, 
 including un-used space for varchar columns.)



mysql-test/valgrind.supp:
  Add new Memcheck suppressions for filesort.
sql/filesort.cc:
  Remove the ifdef HAVE_purify/bzero code, use valgrind suppressions instead.

The fix in revision id marko.makela@oracle.com-20110815091143-h3zbvm0pv8ni3qql
introduced a false UNIV_SYNC_DEBUG alarm. Relax the assertion.

On Fedora, certain accesses to "/var/lib/mysql/HOSTNAME.err" were blocked
by SELinux policy, this made the server start fail with the message
    Manager of pid-file quit without updating file
Calling "/sbin/restorecon -R /var/lib/mysql" fixes this.

                      CRASHES SERVER

Flushing of MERGE table or one of its child tables, which was
locked by flushing thread using LOCK TABLES, might have caused
crashes or assertion failures if the thread failed to reopen
child or parent table.
Particularly, this might have happened when another connection
killed this FLUSH TABLE statement/connection.
Also this problem might have occurred when we failed to reopen
MERGE table or one of its children when executing DDL statement
under LOCK TABLES.

The problem was caused by the fact that reopen_tables() might
have failed to reopen child table but still tried to reopen,
reattach children for and re-lock its parent. Vice versa it
might have failed to reopen parent but kept references from
children to parent around. Since reopen_tables() closes table
it has failed to reopen and therefore frees all associated
memory such dangling references led to crashes when followed.

This patch solves this problem by ensuring that we always close
parent table and all its children if we fail to reopen this
table or one of its children. Same happens if we fail to reattach
children to parent.

Affects 5.1 only.

mysql-test/r/merge.result:
  A test case for BUG#11763712.
mysql-test/t/merge.test:
  A test case for BUG#11763712.
sql/sql_base.cc:
  When flushing tables under LOCK TABLES, all locked
  and flushed tables are released and then reopened.
  It may happen that we failed to reopen some tables,
  in this case we reopen as much tables as possible.
  
  If it was not possible to reopen MERGE child, MERGE
  parent is unusable and must be removed from thread
  open tables list.
  
  If it was not possible to reopen MERGE parent, all
  MERGE child table objects are unusable as well, at
  least because their locks are handled by MERGE parent.
  They must also be removed from thread open tables
  list.
  
  In other words if it was impossible to reopen any
  object of a MERGE table or reattach child tables,
  all objects of this MERGE table must be considered
  unusable and closed.

discarded in buf_page_create()

This bug turned out to be a false alarm, a bug in the UNIV_SYNC_DEBUG
diagnostic code. Because of this, the patch was not backported to the
built-in InnoDB in MySQL 5.1. Furthermore, there is no test case for
InnoDB Plugin in MySQL 5.1, because the delete buffering in MySQL 5.5
makes triggering the failure much easier.

When a freed page for which there exist orphaned buffered changes is
allocated and reused for something else, buf_page_create() will discard
the buffered changes by invoking ibuf_merge_or_delete_for_page().
This would violate the InnoDB latching order.

Tweak the latching order as follows. Move SYNC_IBUF_MUTEX below
SYNC_FSP_PAGE, where it logically belongs, and assign new latching
levels for the ibuf->index->lock and the insert buffer B-tree pages:

#define SYNC_IBUF_MUTEX		370	/* ibuf_mutex */
#define SYNC_IBUF_INDEX_TREE	360
#define SYNC_IBUF_TREE_NODE_NEW	359
#define SYNC_IBUF_TREE_NODE	358

btr_block_get(), btr_page_get(): In UNIV_SYNC_DEBUG, add the parameter
"index" for determining the appropriate latching order
(SYNC_IBUF_TREE_NODE or SYNC_TREE_NODE).

btr_page_alloc_for_ibuf(), btr_create(): Use SYNC_IBUF_TREE_NODE_NEW
instead of SYNC_TREE_NODE_NEW for insert buffer pages.

btr_cur_search_to_nth_level(), btr_pcur_restore_position_func(): Use
SYNC_IBUF_TREE_NODE instead of SYNC_TREE_NODE for insert buffer pages.

btr_search_guess_on_hash(): Assert that the index is not an insert buffer tree.

dict_index_add_to_cache(): Use SYNC_IBUF_INDEX_TREE for the insert
buffer tree (ibuf->index->lock).

ibuf0ibuf.c: Use SYNC_IBUF_TREE_NODE or SYNC_IBUF_TREE_NODE_NEW for
all B-tree pages.

ibuf_merge_or_delete_for_page(): Assert that the user page is
BUF_IO_READ fixed. Only in this way it is OK to latch it as
SYNC_IBUF_TREE_NODE instead of the proper SYNC_TREE_NODE (which would
violate the changed latching order).

sync_thread_add_level(): Remove the special tweak for
SYNC_IBUF_MUTEX. Add rules for the added latching levels.

rb:591 approved by Jimmy Yang

row_sel_field_store_in_mysql_format(): Do not pad the unused part of
the buffer reserved for a True VARCHAR column (introduced in 5.0.3).
Add Valgrind instrumentation ensuring that the unused part will be
flagged uninitialized.

row_sel_copy_cached_field_for_mysql(): New function: Copy a field
that is in the MySQL row format, not copying the unused tail of
VARCHAR columns.

row_sel_pop_cached_row_for_mysql(): Invoke
row_sel_copy_cached_field_for_mysql() for copying fields.
When the row is long, copy it field-by-field.

rb:715 approved by Inaam Rana

for compressed InnoDB tables

ha_innodb::info_low(): For calculating data_length or index_length,
use the compressed page size for compressed tables instead of UNIV_PAGE_SIZE.

rb:714 approved by Sunny Bains

There is an optimization of DISTINCT in JOIN::optimize()
which depends on THD::used_tables value. Each SELECT statement
inside SP resets used_tables value(see mysql_select()) and it
leads to wrong result. The fix is to replace THD::used_tables
with LEX::used_tables.


mysql-test/r/sp.result:
  test case
mysql-test/t/sp.test:
  test case
sql/sql_base.cc:
  THD::used_tables is replaced with LEX::used_tables
sql/sql_class.cc:
  THD::used_tables is replaced with LEX::used_tables
sql/sql_class.h:
  THD::used_tables is replaced with LEX::used_tables
sql/sql_insert.cc:
  THD::used_tables is replaced with LEX::used_tables
sql/sql_lex.cc:
  THD::used_tables is replaced with LEX::used_tables
sql/sql_lex.h:
  THD::used_tables is replaced with LEX::used_tables
sql/sql_prepare.cc:
  THD::used_tables is replaced with LEX::used_tables
sql/sql_select.cc:
  THD::used_tables is replaced with LEX::used_tables

The problem is that TIME_FUZZY_DATE is explicitly used for get_arg0_date()
function in Item_date_typecast::get_date method. The fix is to use real
fuzzy_date value.


mysql-test/r/func_time.result:
  test case
mysql-test/t/func_time.test:
  test case
sql/item_timefunc.cc:
  use real fuzzy_date value

TOOLS

Backport a fix for Bug 57094 from 5.5.
The following revision was backported:

# revision-id: alexander.nozdrin@oracle.com-20101006150613-ls60rb2tq5dpyb5c
# parent: bar@mysql.com-20101006121559-am1e05ykeicwnx48
# committer: Alexander Nozdrin <alexander.nozdrin@oracle.com>
# branch nick: mysql-5.5-bugteam-bug57094
# timestamp: Wed 2010-10-06 19:06:13 +0400
# message:
#   Fix for Bug 57094 (Copyright notice incorrect?).
#   
#   The fix is to:
#     - introduce ORACLE_WELCOME_COPYRIGHT_NOTICE define to have a single place
#       to specify copyright notice;
#     - replace custom copyright notices with ORACLE_WELCOME_COPYRIGHT_NOTICE
#       in programs.

The title of the bug is a little confusing. The actual fix is to
reintroduce random readahead inside InnoDB with a dynamic, global
switch innodb_random_read_ahead [default = off].

Approved by: Sunny Bains
rb://696

Original changeset:
revision-id: alexander.nozdrin@oracle.com-20101221122349-6h8ammcro70a4pac
parent: sven.sandberg@oracle.com-20101221121948-hnivuulyohzch1v4
committer: Alexander Nozdrin <alexander.nozdrin@oracle.com>
branch nick: mysql-trunk-bugfixing
timestamp: Tue 2010-12-21 15:23:49 +0300
message:
  A patch for Bug#59060 (Valgrind warning in Protocol_text::store()).
  
  We should not assume to have zero-terminated strings.

HA_ERR was returning 0 (null string) when no error happened 
(error=0). Since HA_ERR is used in DBUG_PRINT, regardless there 
was an error or not, the server could crash in solaris debug
builds.

We fix this by:

  - deploying an assertion that ensures that the function 
    is not called when no error has happened;
  - making sure that HA_ERR is only called when an error 
    happened;
  - making HA_ERR return "No Error", instead of 0, for 
    non-debug builds if it is called when no error happened.

This will make HA_ERR return values to work with DBUG_PRINT on
solaris debug builds.

                  
The server crashes if it processes table map events that are
corrupted, especially if they map different tables to the same
identifier. This could happen, for instance, due to BUG 56226.
                  
We fix this by checking whether the table map has already been
mapped before actually applying the event. If it has been mapped
with different settings an error is raised and the slave SQL
thread stops. If it has been mapped with same settings the event
is skipped. If the table is set to be ignored by the filtering
rules, there is no change in behavior: the event is skipped and
ids are not checked.


mysql-test/suite/rpl/t/rpl_row_corruption.test:
  Added a simple test case that checks both cases:
  - multiple table maps with the same identifier
  - multiple table maps with the same identifier, but only one
    is processed (the others are filtered out)

When CREATE TABLE wasn't given ENGINE=... it would determine
the default ENGINE at parse-time rather than at execution
time, leading to incorrect behaviour (namely, later changes
to the default engine being ignore) when calling CREATE TABLE
from a stored procedure.

We now defer working out the default engine till execution of
CREATE TABLE.


mysql-test/r/sp_trans.result:
  results!
mysql-test/t/sp_trans.test:
  Show that CREATE TABLE (called from store routine) heeds
  any changes after CREATE SP / parse-time. Show that explicitly
  requesting an ENGINE still works.
sql/sql_parse.cc:
  If no ENGINE=... was given at parse-time, determine default
  engine at execution time of CREATE TABLE.
sql/sql_yacc.yy:
  If CREATE TABLE is not given ENGINE=..., don't bother
  figuring out the default engine during parsing; we'll
  do it at execution time instead to be aware of the
  latest updates.

Manually merged from mysql-5.0 into mysql-5.1.

conflicts
=========

include/Makefile.am

Follow-up patch that adds the newly added header file to
Makefile.am noinst_HEADERS.

Manually merged mysql-5.0 into mysql-5.1.

conflicts
=========
client/mysqlibinlog.cc

CLIENT TOOLS
      
The fix is to backport part of revision:
        
  - alexander.nozdrin@oracle.com-20101006150613-ls60rb2tq5dpyb5c
      
from mysql-5.5. In detail, we add the oracle welcome notice
header file proposed in the original patch and include/use it
in client/mysqlbinlog.cc, replacing the existing and obsolete
notice.

innochecksum not built for --with-plugin-innodb_plugin --without-plugin-innobase

In 5.1, we can have the traditional "innobase" code
(built-in) or the new version "innodb" (plugin).
The help tool "innochecksum" is useful for both,
but its generation was coupled to "innobase" only.

Fix this by treating both "innobase" and "innodb"
equivalent in the configure phase,
this affects both "innochecksum" and the InnoDB documentation.

This patch was proposed by Mark Callaghan.

bug.  It added this assert;
    ut_ad(ind_field->prefix_len);
before a section of code that assumes there is a prefix_len.  

The patch replaced code that explicitly avoided this with a check for
prefix_len.  It turns out that the purge thread can get to that assert
without a prefix_len because it does not use a row_ext_t* .
When UNIV_DEBUG is not defined, the affect of this is that the purge thread
sets the dfield->len to zero and then cannot find the entry in the index to
purge.  So secondary index entries remain unpurged.

This patch does not do the assert.  Instead, it uses
    'if (ind_field->prefix_len) {...}'
around the section of code that assumes a prefix_len.  This is the way the
patch I provided to Marko did it.

The test case is simply modified to do a sleep(10) in order to give the
purge thread a chance to run. Without the code change to row0row.c, this
modified testcase will assert if InnoDB was compiled with UNIV_DEBUG.
I tried to sleep(5), but it did not always assert.

Let the creation of the "test" database happen only during a new
installation, not in an RPM upgrade.