Use "#ifdef", not plain "#if".

            view that has Group By
      
When SELECT'ing from a view that mentions another,
materialized, view, access was being denied. The issue was
resolved by lifting a special case which avoided such access
checking in check_single_table_access. In the past, this was
necessary since if such a check were performed, the error
message would be downgraded to a warning in the case of SHOW
CREATE VIEW. The downgrading of errors was meant to handle
only that scenario, but could not distinguish the two as it
read only the error messages.
      
The special case was needed in the fix of bug no 36086.
Before that, views were confused with derived tables.
      
After bug no 35996 was fixed, the manipulation of errors
during SHOW CREATE VIEW execution is not dependent on the
actual error messages in the queue, it rather looks at the
actual cause of the error and takes appropriate
action. Hence the aforementioned special case is now
superfluous and the bug is fixed.


mysql-test/r/view_grant.result:
  Bug#46019: Test result.
mysql-test/t/view_grant.test:
  Bug#46019: Test case.
sql/sql_parse.cc:
  Bug#46019: fix.

Temporary tables may set join->group to 0 even though there is 
grouping. Also need to test if sum_func_count>0 when JOIN::exec() 
decides whether to present results in a grouped manner.

sql/sql_select.cc:
  Temporary tables may set join->group to 0 even though there is 
  grouping. Also need to test if sum_func_count>0 when JOIN::exec() 
  decides whether to present results in a grouped manner.

            columns without where/group
                     
Simple SELECT with implicit grouping used to return many rows if
the query was ordered by the aggregated column in the SELECT
list. This was incorrect because queries with implicit grouping
should only return a single record.
                              
The problem was that when JOIN:exec() decided if execution needed
to handle grouping, it was assumed that sum_func_count==0 meant
that there were no aggregate functions in the query. This
assumption was not correct in JOIN::exec() because the aggregate
functions might have been optimized away during JOIN::optimize().
                  
The reason why queries without ordering behaved correctly was
that sum_func_count is only recalculated if the optimizer chooses
to use temporary tables (which it does in the ordered case).
Hence, non-ordered queries were correctly treated as grouped.
                  
The fix for this bug was to remove the assumption that
sum_func_count==0 means that there is no need for grouping. This
was done by introducing variable "bool implicit_grouping" in the
JOIN object.

mysql-test/r/func_group.result:
  Add test for BUG#47280
mysql-test/t/func_group.test:
  Add test for BUG#47280
sql/opt_sum.cc:
  Improve comment for opt_sum_query()
sql/sql_class.h:
  Add comment for variables in TMP_TABLE_PARAM
sql/sql_select.cc:
  Introduce and use variable implicit_grouping instead of (!group_list && sum_func_count) in places that need to test if grouping is required. Also added comments for: optimization of aggregate fields for implicitly grouped queries  (JOIN::optimize) and choice of end_select method (JOIN::execute)
sql/sql_select.h:
  Add variable implicit_grouping, which will be TRUE for queries that contain aggregate functions but no GROUP BY clause. Also added comment to sort_and_group variable.

      
The BINLOG statement was sharing too much code with the slave SQL thread, introduced with
the patch for Bug#32407. This caused statements to be logged with the wrong server_id, the
id stored inside the events of the BINLOG statement rather than the id of the running 
server.
      
Fix by rearranging code a bit so that only relevant parts of the code are executed by
the BINLOG statement, and the server_id of the server executing the statements will 
not be overrided by the server_id stored in the 'format description BINLOG statement'.

mysql-test/extra/binlog_tests/binlog.test:
  Added test to verify if the server_id stored in the 'format 
  description BINLOG statement' will override the server_id
  of the server executing the statements.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
  Test result for bug#46640
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
  Test result for bug#46640
sql/log_event.cc:
  Moved rows_event_stmt_clean() call from update_pos() to apply_event(). This in any case
  makes more sense, and is needed as update_pos() is no longer called when executing
  BINLOG statements.
  
  Moved setting of rli->relay_log.description_event_for_exec from 
  Format_description_log_event::do_update_pos() to 
  Format_description_log_event::do_apply_event()
sql/log_event_old.cc:
  Moved rows_event_stmt_clean() call from update_pos() to apply_event(). This in any case
  makes more sense, and is needed as update_pos() is no longer called when executing
  BINLOG statements.
sql/slave.cc:
  The skip flag is no longer needed, as the code path for BINLOG statement has been 
  cleaned up.
sql/sql_binlog.cc:
  Don't invoke the update_pos() code path for the BINLOG statement, as it contains code 
  that is redundant and/or harmful (especially setting thd->server_id).

 
The problem was in incorrect handling of predicates involving 
NULL as a constant value by the range optimizer.  
 
For example, when creating a SEL_ARG node from a condition of 
the form "field < const" (which would normally result in the 
"NULL < field < const" SEL_ARG),  the special case when "const" 
is NULL was not taken into account, so "NULL < field < NULL" 
was produced for the "field < NULL" condition. 
 
As a result, SEL_ARG structures of this form could not be 
further optimized which in turn could lead to incorrectly 
constructed SEL_ARG trees. In particular, code assuming SEL_ARG 
structures to always form a sequence of ordered disjoint 
intervals could enter an infinite loop under some 
circumstances. 
 
Fixed by changing get_mm_leaf() so that for any sargable 
predicate except "<=>" involving NULL as a constant, "empty" 
SEL_ARG is returned, since such a predicate is always false. 

mysql-test/r/range.result:
  Added a test case for bug #47123.
mysql-test/t/range.test:
  Added a test case for bug #47123.
sql/opt_range.cc:
  Fixed get_mm_leaf() so that for any sargable 
  predicate except "<=>" involving NULL as a constant, "empty" 
  SEL_ARG is returned, since such a predicate is always false.

- Fix a typo and adjust the CMakeLists.txt
- Remove the README file as it doesn't exist in 
  Innodb plugin 1.0.5

The bug has been closed.

Sync the storage/innodb_plugin/mysql-test directory
with Innodb_plugin-1.0.5/mysql-test directory

Update the README file

1. Undo r6031 btr/btr0btr.c changes

2. apply skipped Plug.in changes and missed revisions

Detailed revision comments:

r5865 | vasil | 2009-09-12 02:26:03 -0500 (Sat, 12 Sep 2009) | 10 lines
branches/zip:

Simplify the compile time checks by splittig them into 5 independent checks:

* Whether GCC atomics are available
* Whether pthread_t can be used by GCC atomics
* Whether Solaris libc atomics are available
* Whether pthread_t can be used by Solaris libs atomics
* Checking the size of pthread_t

r5869 | vasil | 2009-09-12 03:33:11 -0500 (Sat, 12 Sep 2009) | 15 lines
branches/zip:

Include ut0auxconf.h only if none of the macros it would define is defined.
The check when to include this header was outdated from the time when there
was only one macro involved.

Move the atomics checks that are in univ.i outside of
#if windows ... #else ... #endif
This simplifies the code and removes some duplicates like defining
HAVE_ATOMIC_BUILTINS if HAVE_WINDOWS_ATOMICS is defined in both branches.

Do not define the same macro HAVE_ATOMIC_PTHREAD_T for different events.
Instead define HAVE_IB_ATOMIC_PTHREAD_T_GCC and
HAVE_IB_ATOMIC_PTHREAD_T_SOLARIS.

r5871 | vasil | 2009-09-12 04:25:44 -0500 (Sat, 12 Sep 2009) | 6 lines
branches/zip:

Rename HAVE_SOLARIS_ATOMICS to HAVE_IB_SOLARIS_ATOMICS and 
IB_HAVE_PAUSE_INSTRUCTION to HAVE_IB_PAUSE_INSTRUCTION so they
all follow the same HAVE_IB_* convention.

r5888 | vasil | 2009-09-14 03:38:45 -0500 (Mon, 14 Sep 2009) | 40 lines
branches/zip:

Back-merge c5880 and c5881 from branches/embedded-1.0:

  ------------------------------------------------------------------------
  r5880 | vasil | 2009-09-12 17:28:44 +0300 (Sat, 12 Sep 2009) | 18 lines
  Changed paths:
     M /branches/embedded-1.0/configure.in
     M /branches/embedded-1.0/include/os0sync.h
     M /branches/embedded-1.0/srv/srv0start.c
  
  branches/embedded-1.0:
  
  Clean up and simplify the code that surrounds the atomic ops:
  
  * Simplify the code that prints what atomics are used:
  Instead of repeating the same conditions on which each atomics are used
  use just one printf that prints a variable defined by the code which
  chooses what atomics to use.
  
  * In os0sync.h pick up each atomic variant only if it has been selected
  by autoconf (based on IB_ATOMIC_MODE_* macros). Define the startup message
  to be printed.
  
  * In configure.in: check what user has chosen and if he has chosen
  something that is not available, emit an error. If nothing has been chosen
  explicitly by the user, auto select an option according to the described
  logic in configure.in.
  
  ------------------------------------------------------------------------
  r5881 | vasil | 2009-09-12 20:08:27 +0300 (Sat, 12 Sep 2009) | 4 lines
  Changed paths:
     M /branches/embedded-1.0/configure.in
  
  branches/embedded-1.0:
  
  Fix syntax error in test program.
  
  ------------------------------------------------------------------------

r5889 | vasil | 2009-09-14 04:17:18 -0500 (Mon, 14 Sep 2009) | 5 lines
branches/zip:

Add missing return statement in the test program that could have
caused a warning.

r5893 | inaam | 2009-09-14 10:20:48 -0500 (Mon, 14 Sep 2009) | 10 lines
branches/zip  rb://159

In case of pages that are not made young the counter is incremented
only when the page in question is 'old'. In case of pages that are
made young the counter is incremented in case of all pages. For apple
to apple comparison this patch changes the 'young-making' counter to
consider only 'old' blocks.

Approved by: Marko

r5537 | vasil | 2009-07-21 04:31:26 -0500 (Tue, 21 Jul 2009) | 5 lines
branches/zip:

Fixups in ChangeLog: sort filenames alphabetically and wrap to 78 chars per
line.
r5870 | vasil | 2009-09-12 04:13:44 -0500 (Sat, 12 Sep 2009) | 7 lines
branches/zip:

Define HAVE_ATOMIC_BUILTINS and INNODB_RW_LOCKS_USE_ATOMICS in os0sync.h
instead of in univ.i. The code expects os_*() macros to be present if
HAVE_ATOMIC_BUILTINS and INNODB_RW_LOCKS_USE_ATOMICS are defined. So define
them next to defining the os_*() macros.

r5696 | vasil | 2009-08-26 08:15:59 -0500 (Wed, 26 Aug 2009) | 14 lines
branches/zip:

Merge a change from MySQL:

 http://lists.mysql.com/commits/80832

 2968 Jonathan Perkin	2009-08-14
      Build fixes for Windows, AIX, HP/UX and Sun Studio11, from Timothy Smith.
      modified:
        CMakeLists.txt
        cmd-line-utils/readline/util.c
        storage/innodb_plugin/handler/i_s.cc
        storage/innodb_plugin/include/univ.i

r5897 | marko | 2009-09-15 03:29:00 -0500 (Tue, 15 Sep 2009) | 8 lines
branches/zip: Avoid bogus messages about latching order violations when
UNIV_SYNC_DEBUG is defined.

sync_thread_levels_g(): Add the parameter "warn".  Do not print
anything unless it is set.

sync_thread_add_level(): Pass warn=TRUE to sync_thread_levels_g()
when the check is within an assertion; FALSE if it is not.

r5899 | marko | 2009-09-15 06:26:01 -0500 (Tue, 15 Sep 2009) | 4 lines
branches/zip: ut0ut.h: Do not #include "os0sync.h" #ifdef UNIV_HOTBACKUP.
Since r5872, the InnoDB Hot Backup build was broken.
Fix it by not defining any thread synchronization primitives in ut0ut.h.
InnoDB Hot Backup is a single-threaded program.

changing year in copyright header to 2009.

Fixing copyright header in test collation file.

mysql-test/std_data/latin1.xml:
  Bug#46448 trailing spaces are not ignored when user collation maps space != 0x20
  
  Fixing copy right header in test collation file.

In MySQL when the mapping for space is changed to something other than
0x20 by defining a different collation, then space is not ignored when
comparing two strings.

This was happening because the function that performs the comparison
of two strings while ignoring ending spaces, was comparing the collation
value of a space with the ascii value of the ' ' character. This should
be changed to do comparison between the collated values.

mysql-test/r/ctype_ldml.result:
  Bug#46448 trailing spaces are not ignored when user collation maps space != 0x20
  
  Result file for test case.
mysql-test/std_data/Index.xml:
  Bug#46448 trailing spaces are not ignored when user collation maps space != 0x20
  
  Added entry for new test collation in the index file.
mysql-test/std_data/latin1.xml:
  Bug#46448 trailing spaces are not ignored when user collation maps space != 0x20
  
  Added support for new collation for test.
mysql-test/t/ctype_ldml.test:
  Bug#46448 trailing spaces are not ignored when user collation maps space != 0x20
  
  Added test case to ensure trailing spaces are not ignored.
strings/ctype-simple.c:
  Bug#46448 trailing spaces are not ignored when user collation maps space != 0x20
  
  change my_strnncollsp_simple to compare collated values when checking
  for trailing spaces. Currently the comparison happens between a collated
  value and the ascii value.

  A build "--without-server" fails if using "--with-ssl" (YaSSL)

The problem was the lack of directory "extra" in a build
which did not include the server.

configure.in:
  1) Ensure "extra" is in the list of client directories.
  2) Always handle the client directories first, as they will
     be contained in every build (we have client-only, but not
     server-only).