a minor improvement to the test to ease merging.

mysql-test/suite/rpl/r/rpl_server_id2.result:
  results changed.
mysql-test/suite/rpl/t/rpl_server_id2.test:
  masking out the until_pos which value is out of interest but
  it presence hurts merging between trees.

Bug#38540 rpl_server_id2 uses show slave status unnecessarily
            
Slave did not perform any event recorded into the relay log from some
different master when it was started with --replicate-same-server-id.
The reason appeared to be a consequence of BUG#38734 which stopped the
sql thread at its startup time.
      
The real fixes for the current bug are in the patch for BUG#38734.
This changeset carries only a regression test for the bugs.  Bug#38540
gets fixed too by means of eliminating an extra show slave status.


mysql-test/suite/rpl/r/rpl_server_id2.result:
  Bug#38934 Bug#38540 changed results.
mysql-test/suite/rpl/t/disabled.def:
  rpl_server_id2 is re-enabled.
mysql-test/suite/rpl/t/rpl_server_id2.test:
  regression test for BUG#38734 is added.
  Bug#38540 requirement to get rid of show slave status is implemented.

mysql-test/include/wait_until_disconnected.inc:
  Allow 2013 as an expected error code

Note that this result set is different from that in 6.0/6.0-rpl.

mysql-test/lib/My/File/Path.pm:
  Extend 'copytree' to take an optional "umask" parameter that will be used while copying the files
mysql-test/mysql-test-run.pl:
  Pass umask 0022 to copytree so that the copied files will be created world readable and the mysqld
  can LOAD DATA INFILE them

Adding --loose-skip-falcon option to the mysqld options provided by MTR (v2) during mysqld bootstrap in order to avoid plugin (in this case Falcon) initialization of static variables etc. Options --loose-skip-innodb and --loose-skip-ndbcluster were already included.

This will fix Bug#41014 (falcon_bug_39708 fails in pushbuild in 6.0-rpl: "succeeded - should have failed")
in the case of MTR v2 (which currently is available in -rpl branches only). 
MTR v1 (e.g. in main 6.0 branch) does not have this problem.

It would be more ideal to remove the --loose-skip-* options and provide a single option disabling all plugin initialization instead, or have bootstrap do this by default. Server modifications are (most likely) needed to be able to do that.


mysql-test/mysql-test-run.pl:
  Reintroduced the --loose-skip-falcon bootstrap option used by the previous version of this test runner.

      
The test reacted on the way how mtr orders arguments for the server
that are gathered from different source. It appeared that the opt-file
options were parsed before those that supplied to mtr via its command
line. In effect, the opt-file preferences got overriden by the command
line and some tests, like no-threads, were caught by surprise: a test
expects an option value that had been "hardcoded" into its opt-file
but gets another one.
This server options ordering problem exists on in the new rpl trees
mtr.  In option of the author of this patch, the opt-file shall be
considered as having the highest preference weight. The opt-file is
merely a part of the header of a test, namely a part that can not be
technically deployed along the test file.
It's unnatural for the test writer to provide both the opt file value
and a guard that guarantees the value will be set on in the run time.
It's logical to provide either one: the option and its value or the
guard.

Fixed with relocating parse of the opt file to be the last among
sources of the sever's options.

A side effect: fixing a small problem of resetting the suite options
at time the opt file starts parsing.

A side effect: main.log_bin_trust_function_creators_func is disabled to
be re-enabled with the fixes for bug#41003 will be merged from the main trees.


mysql-test/lib/mtr_cases.pm:
  Relocating parse of the opt file to be the last. This ensure the opt file is the last
  provider for the server options so that the opt-file options have the highest preference;
  fixing a separate issue of incorrect resetting the suite options for the server;
mysql-test/t/disabled.def:
  log_bin_trust_function_creators_func is disabled. Todo: to-reable when fixes for bug#41003
  will be merged from the main trees.

exact number of error. The patch does following:
1) Add new parameter $slave_sql_errno for wait_for_slave_sql_error.inc
2) Add waiting error 1062 (Duplicate PK) for slave SQL thread in test case.

where timeout can happen:
1. Added waiting start/stop slave to make sure that slave works properly.
2. Added cleanup for slave.
3. Updated related result files.

sync_with_master command. The patch add waiting of proper state of slave 
before sync with master.

mysql-test/include/wait_until_disconnected.inc:
  Change the default value for $mysql_errno so that the loops is run at least once

mysql-test/include/mtr_warnings.sql:
  Slice the time the takes to load the servers error log into error_log table
  by using a declared variable instead of user variable.
  Also change the while loop to only do one LOCATE per loop.
  Drop the temporary tables created by sp

                  
The problem here is that embedded server starts handle_thread manager 
thread  on mysql_library_init() does not stop it on mysql_library_end().
At shutdown, my_thread_global_end() waits for thread count to become 0,
but since we did not stop the thread it will give up after 5 seconds.
             
Solution is to move shutdown for handle_manager thread from kill_server()
(mysqld specific) to clean_up() that is used by both embedded and mysqld.
            
This patch also contains some refactorings - to avoid duplicate code,
start_handle_manager() and stop_handle_manager() functions are introduced.
Unused variables are eliminated. handle_manager does not rely on global
variable abort_loop anymore to stop (abort_loop is not set for embedded).
            
Note: Specifically on Windows and when using DBUG version of libmysqld, 
the complete solution requires removing obsolete code my_thread_init() 
from my_thread_var(). This has a side effect that a DBUG statement 
after my_thread_end() can cause thread counter to be incremented, and 
embedded will hang for some seconds. Or worse, my_thread_init() will 
crash if critical sections have been deleted by the global cleanup 
routine that runs in a different thread. 

This patch also fixes and revert prior changes for Bug#38293 
"Libmysqld crash in mysql_library_init if language file missing".

Root cause of the crash observed in Bug#38293  was bug in my_thread_init() 
described above




client/mysql.cc:
  sql_protocol_typelib is not exported from libmysqld
  (does not make sense either)
  thus excluded from embedded client
dbug/dbug.c:
  revert changes for Bug#38293
include/my_dbug.h:
  revert changes for Bug#38293
libmysql/libmysql.c:
  Removed DBUG_POP call, because when called after my_end(), will access
  THR_key_mysys that is already deleted. The result of pthread_get_specific
  is not predictable in this case and hence DBUG_POP can crash.
libmysqld/examples/CMakeLists.txt:
  Revert changes for Bug#38293.
libmysqld/lib_sql.cc:
  code to start handle manager is factored out into 
  start_handle_manager() function
libmysqld/libmysqld.def:
  Revert changes for Bug #38293
  Remove excessive exports from libmysqld, export what API documents.
mysys/my_thr_init.c:
  Remove windows-DLL-specific workaround for something (old code, no documentation for
  what specifically). The problem is that even after my_thread_end() is finished, 
  DBUG statement can initiate my_thread_init(). This does not happen anywhere else and 
  should not happen on  Windows either.
sql/mysql_priv.h:
  - new functions start_handle_manager() and stop_handle_manager()
  - move manager_thread_in_use  variable to sql_manager.cc and made
  it static
  - remove manager_status, as it is unused
sql/mysqld.cc:
  Code to start/stop handle_manager thread is factored out into start_handle_manager()

Added text "Test ended at <time>" after failure reports

BUG#39382: innodb_max_dirty_pages_pct_func failed with timeout on pushbuild
Disabled innodb_max_dirty_pages_pct_func.
Please re-enable if the test gets fixed.


mysql-test/t/disabled.def:
  Disabled innodb_max_dirty_pages_pct_func.

There was a missing initialization.

sql/set_var.h:
  Added an initialization missing during the merge of 37339.

with non-RSA-requesting client if server uses RSA key

matchSuite() may not find a match. 
It will return error in this case.
Added a error checking code that will prevent using uninitialized 
memory in the code based on the assumption 
that matchSuite() has found a match.

extra/yassl/src/yassl_imp.cpp:
  Bug #39178: Correct error checking added