use frm_version, not mysql_version when parsing frm

In particular, virtual columns are stored according to
frm_version. And CHECK TABLE will overwrite mysql_version
to the current server version, so it cannot correctly
describe frm format.

Before MDEV-5800 in MariaDB 10.2.2, InnoDB knew nothing about
virtual columns. But, they would be present in the TABLE_SHARE.

It appears that the MDEV-12936 fix only worked in the special case
when the virtual columns are the last columns in a table definition.

mysql_fields(): Remove.

build_template_needs_field(): Omit virtual columns if the
InnoDB table definition is known to not contain them, based
on the .frm file version.

build_template_field(): Clean up some code.

ha_innobase::build_template(): Remove redundant computations.
Loop over all MariaDB columns. Skip virtual columns if
InnoDB does not know about them.

calc_row_difference(): Skip not-known-to-InnoDB virtual columns.

wsrep_calc_row_hash(): Skip all virtual columns. This would
fix an out-of-bounds access to dict_table_t::cols[]. Also,
remove some redundant computations and variables.

create_table_check_doc_id_col(): Assert that the .frm file
for a newly created table will be in a format where InnoDB
knows about virtual columns.

Write a test case that computes valid crc32 checksums for
an encrypted page, but zeroes out the payload area, so
that the checksum after decryption fails.

xb_fil_cur_read(): Validate the page number before trying
any checksum calculation or decrypting or decompression.
Also, skip zero-filled pages. For page_compressed pages,
ensure that the FIL_PAGE_TYPE was changed. Also, reject
FIL_PAGE_PAGE_COMPRESSED_ENCRYPTED if no decryption was attempted.

While printing a view containing a window function we were printing it as an
Item_field object instead of an Item_window_func object. This is incorrect and this
leads to us throwing an error ER_VIEW_INVALID.
Fixed by adjusting the Item_ref:print function.
Also made UDF function aware if there arguments have window function.

Attempt to fix by retrying srv_sys_space.open_or_create() if it reports
corruption.

The fix was accidentally only applied to InnoDB, and encryption tests
were not adjusted.

Problem:
=======
Mariabackup seems to fail to verify the pages of compressed tables.
The reason is that both fil_space_verify_crypt_checksum() and
buf_page_is_corrupted() will skip the validation for compressed pages.

Fix:
====
Mariabackup should call fil_page_decompress() for compressed and encrypted
compressed page. After that, call buf_page_is_corrupted() to
check the page corruption.

Starting with commit 6b698715
the encrypted page checksum is only computed with crc32.
Encrypted data pages that were written earlier can contain
other checksums, but new ones will only contain crc32.

Because of this, it does not make sense to implement strict
checks of innodb_checksum_algorithm for other than strict_crc32.

fil_space_verify_crypt_checksum(): Treat strict_innodb as innodb
and strict_none as none. That is, allow a match from any of the
algorithms none, innodb, crc32. (This is how it worked before the
second MDEV-12112 fix.)

Thanks to Thirunarayanan Balathandayuthapani for pointing this out.

fil_space_verify_crypt_checksum(): Compute the bug-compatible variant
of the CRC-32C checksum if the correct one does not match.

fil_space_verify_crypt_checksum(): Add a dummy return statement
in case memory is corrupted and innodb_checksum_algorithm has
an invalid value.

The initial fix only covered a part of Mariabackup.
This fix hardens InnoDB and XtraDB in a similar way, in order
to reduce the probability of mistaking a corrupted encrypted page
for a valid unencrypted one.

This is based on work by Thirunarayanan Balathandayuthapani.

fil_space_verify_crypt_checksum(): Assert that key_version!=0.
Let the callers guarantee that. Now that we have this assertion,
we also know that buf_page_is_zeroes() cannot hold.
Also, remove all diagnostic output and related parameters,
and let the relevant callers emit such messages.
Last but not least, validate the post-encryption checksum
according to the innodb_checksum_algorithm (only accepting
one checksum for the strict variants), and no longer
try to validate the page as if it was unencrypted.

buf_page_is_zeroes(): Move to the compilation unit of the only callers,
and declare static.

xb_fil_cur_read(), buf_page_check_corrupt(): Add a condition before
calling fil_space_verify_crypt_checksum(). This is a non-functional
change.

buf_dblwr_process(): Validate the page only as encrypted or unencrypted,
but not both.

A static analysis tool suggested that in the function
row_merge_read_clustered_index(), ut_free(nonnull) could
be invoked twice for nonnull!=NULL. While a manual review
of the code disproved this, it should not hurt to clean up
the code so that the static analysis tool will not complain.

index_tuple_info_t::insert(), row_mtuple_cmp(): Remove the
parameter mtr_committed, which duplicated !mtr->is_active().

row_merge_read_clustered_index(): Initialize row_heap = NULL.
Remove a duplicated call mem_heap_empty(row_heap) that was
inadvertently added in commit cb1e76e4.

Replace a "goto func_exit" with "break", to get consistent error
handling for both failures to create or write a temporary file.

end_of_index: Assign row_heap=NULL and nonnull=NULL to prevent
double freeing.

func_exit: Check for row_heap!=NULL before invoking mem_heap_free().

Closes #959

Remove provider defaults check from 'galera_defaults' MTR test

Problem is that if you use bundled yassl AES_CTR is not supported. There is a way to detect that but as we really want to keep this test enabled did not add
skip for missing support. Changed method to AES_CBC as there is no need to
use AES_CTR.

Add check that file key management plugin is found.

While calculating distinct with the function remove_dup_with_compare, we don't have rnd_end calls
when we have completed the scan over the temporary table.
Added ha_rnd_end calls when we are done with the scan of the table.

galera_prepared_statement test fixed.

connect.xml2 test result fixed.

The error message modified.
Then the TABLE_SHARE::error_table_name() implementation taken from 10.3,
          to be used as a name of the table in this message.

ported privilege checking from xtrabackup.
Now, mariabackup would terminate early if either RELOAD or PROCESS privilege
is not held, not at the very end of backup

The behavior can be disabled with nre setting --check-privileges=0.
Also , --no-lock does not need all of these privileges, since it skips
FTWRL and SHOW ENGINE STATUS INNODB.

From time to time Galera adds new parameters or changes defaults to
existing ones. Every time this happens galera_defaults test needs a
fix (and a commit) because it insists on checking these defaults.
This is making life hard because any Galera update may require a fix
to MariaDB code even though it is totally unrelated and defeats the
whole idea of a provider living its own life.
This commit removes checking for provider defaults to avoid false
positive failures on MariaDB side.

Internal transactions may not have trx->mysql_thd.
But at the same time, trx->duplicates should only hold if
REPLACE or INSERT...ON DUPLICATE KEY UPDATE was executed from SQL.

The flag feels misplaced. A more appropriate place for it would
be row_prebuilt_t or similar.

After validating the post-encryption checksum on an encrypted page,
Mariabackup should decrypt the page and validate the pre-encryption
checksum as well. This should reduce the probability of accepting
invalid pages as valid ones.

This is a backport and refactoring of a patch that was
originally written by Thirunarayanan Balathandayuthapani
for the 10.2 branch.

Innochecksum was being built as if WITH_INNODB_BUG_ENDIAN_CRC32:BOOL=OFF
had been specified.

Also, clean up tests:

innodb.innochecksum: Useless; superceded by innodb_zip.innochecksum.
innodb.innodb_zip_innochecksum: Remove; duplicated innodb_zip.innochecksum.
innodb.innodb_zip_innochecksum2: Remove; duplicated innodb_zip.innochecksum_2.
innodb.innodb_zip_innochecksum3: Remove; duplicated innodb_zip.innochecksum_3.

No test case was added. I tested manually by adding debug instrumentation
to both innochecksum and buf_page_is_checksum_valid_crc32() to make
innochecksum write the buggy crc32, and to get warnings for falling back
to the buggy checksum. Automating this would require that tests be
adjusted depending on the build options.

Allow array binding for DELETE, test it.

With innodb_default_row_format=redundant, InnoDB would crash when
using table options that are incompatible with ROW_FORMAT=REDUNDANT.

create_table_info_t::m_default_row_format: Cache the value of
innodb_default_row_format.

create_table_info_t::check_table_options(): Validate ROW_TYPE_DEFAULT
with m_default_row_format.

create_table_info_t::innobase_table_flags(): Use the
cached m_default_row_format.

create_table_info_t: Never read m_form->s->row_type.
Use m_create_info->row_type instead.

dict_tf_set(): Never set invalid flags for ROW_FORMAT=REDUNDANT.

ha_innobase::truncate(): Set info.row_type based on the ROW_FORMAT
of the current table.

In MySQL 5.7, it was noticed that files are not portable between
big-endian and little-endian processor architectures
(such as SPARC and x86), because the original implementation of
innodb_checksum_algorithm=crc32 was not byte order agnostic.

A byte order agnostic implementation of innodb_checksum_algorithm=crc32
was only added to MySQL 5.7, not backported to 5.6. Consequently,
MariaDB Server versions 10.0 and 10.1 only contain the CRC-32C
implementation that works incorrectly on big-endian architectures,
and MariaDB Server 10.2.2 got the byte-order agnostic CRC-32C
implementation from MySQL 5.7.

MySQL 5.7 introduced a "legacy crc32" variant that is functionally
equivalent to the big-endian version of the original crc32 implementation.
Thanks to this variant, old data files can be transferred from big-endian
systems to newer versions.

Introducing new variants of checksum algorithms (without introducing
new names for them, or something on the pages themselves to identify
the algorithm) generally is a bad idea, because each checksum algorithm
is like a lottery ticket. The more algorithms you try, the more likely
it will be for the checksum to match on a corrupted page.

So, essentially MySQL 5.7 weakened innodb_checksum_algorithm=crc32,
and MariaDB 10.2.2 inherited this weakening.

We introduce a build option that together with MDEV-17957
makes innodb_checksum_algorithm=strict_crc32 strict again
by only allowing one variant of the checksum to match.

WITH_INNODB_BUG_ENDIAN_CRC32: A new cmake option for enabling the
bug-compatible "legacy crc32" checksum. This is only enabled on
big-endian systems by default, to facilitate an upgrade from
MariaDB 10.0 or 10.1. Checked by #ifdef INNODB_BUG_ENDIAN_CRC32.

ut_crc32_byte_by_byte: Remove (unused function).

legacy_big_endian_checksum: Remove. This variable seems to have
unnecessarily complicated the logic. When the weakening is enabled,
we must always fall back to the buggy checksum.

buf_page_check_crc32(): A helper function to compute one or
two CRC-32C variants.

Also, apply the MDEV-17957 changes to encrypted page checksums,
and remove error message output from the checksum function,
because these messages would be useless noise when mariabackup
is retrying reads of corrupted-looking pages, and not that
useful during normal server operation either.

The error messages in fil_space_verify_crypt_checksum()
should be refactored separately.

This is a backport of a part of
commit 18455ec3
from 10.1.