- Problem is that failure of inplace DDL tries to access the
uninitialized column. This is caused by MDEV-19606 (commit 0274ab1d).
Fix is that InnoDB should use column while freeing the index when index
is completely initialized.

In 10.3 and earlier, some lines in the result file were
terminated by CR and LF, but in 10.4, all files are expected
to be terminated by LF only.

Also, my build of 10.4 apparently failed without me noticing
it, and the MDEV-22545 fix was not present. The %T should
not have been replaced with %s at all.

- During column reorder table rebuild, rollback of insert fails.
Reason is that InnoDB tries to fetch the column position from
new clustered index and it exceeds default column value tuple fields.
So InnoDB should use the table column position while searching for
defaults column value.

There was a race condition where the connection of the
victim of a KILL statement is disconnected while the
KILL statement is executing.

As a side effect of this fix, we will make XA PREPARE
transactions immune to KILL statements.

Starting with MariaDB 10.2, we have a pool of trx_t objects.
trx_free() would only free memory to the pool. We poison the
contents of freed objects in the pool in order to catch misuse.

trx_free(): Unpoison also trx->mysql_thd and trx->state.
This is to counter the poisoning of *trx in trx_pools->mem_free().
Unpoison only on AddressSanitizer or Valgrind, but not on MemorySanitizer.

Pool: Unpoison allocated objects only on AddressSanitizer or
Valgrind, but not on MemorySanitizer.

innobase_kill_query(): Properly protect trx, acquiring also
trx_sys_t::mutex and checking trx_t::mysql_thd and trx_t::state.

commit cf52dd17 failed to
adjust the result of the test main.mysqldump.

A temporary table is needed for window function computation but if only a NAMED WINDOW SPEC
is used and there is no window function, then there is no need to create a temporary
table as there is no stage to compute WINDOW FUNCTION

Added parameter %T for string which should be visibly truncated.

MDEV-21398 Deadlock (server hang) or assertion failure in
Diagnostics_area::set_error_status upon ALTER under lock

This failure could only happen if one locked the same table
multiple times and then did an ALTER TABLE on the table.

Major change is to change all instances of
table->m_needs_reopen= true;
to
table->mark_table_for_reopen();

The main fix for the problem was to ensure that we mark all
instances of the table in the locked_table_list and when we
reopen the tables, we first close all tables before reopening
and locking them.

Other things:
- Don't call thd->locked_tables_list.reopen_tables if there
  are no tables marked for reopen. (performance)

Item_null_result did not override type_handler() because of a wrong merge
of d8a9b524 (MDEV-14221) from 10.1.

Overriding type_handler().

Removing the old style field_type() method. It's not relevant any more.

MDEV-22002 Assertion `!is_set() || (m_status == DA_OK_BULK &&
is_bulk_op())' failed upon CREATE TEMPORARY SEQUENCE under XA

MDEV-22111 ERROR 1064 & 1033 and SIGSEGV on CREATE TABLE w/ various charsets on 10.4/5 optimized builds | Assertion `(uint) (table_check_constraints - share->check_constraints) == (uint) (share->table_check_constraints - share->field_check_constraints)' failed

Additional 10.2 specific tests (with JSON)

MDEV-22111 ERROR 1064 & 1033 and SIGSEGV on CREATE TABLE w/ various charsets on 10.4/5 optimized builds | Assertion `(uint) (table_check_constraints - share->check_constraints) == (uint) (share->table_check_constraints - share->field_check_constraints)' failed

The code incorrectly assumed in multiple places that TYPELIB
values cannot have 0x00 bytes inside. In fact they can:

  CREATE TABLE t1 (a ENUM(0x61, 0x0062) CHARACTER SET BINARY);

Note, the TYPELIB value encoding used in FRM is ambiguous about 0x00.

So this fix is partial.

It fixes 0x00 bytes in many (but not all) places:

- In the middle or in the end of a value:
    CREATE TABLE t1 (a ENUM(0x6100) ...);
    CREATE TABLE t1 (a ENUM(0x610062) ...);

- In the beginning of the first value:
    CREATE TABLE t1 (a ENUM(0x0061));
    CREATE TABLE t1 (a ENUM(0x0061), b ENUM('b'));

- In the beginning of the second (and following) value of the *last* ENUM/SET
  in the table:

    CREATE TABLE t1 (a ENUM('a',0x0061));
    CREATE TABLE t1 (a ENUM('a'), b ENUM('b',0x0061));

However, it does not fix 0x00 when:

- 0x00 byte is in the beginning of a value of a non-last ENUM/SET
  causes an error:

   CREATE TABLE t1 (a ENUM('a',0x0061), b ENUM('b'));
   ERROR 1033 (HY000): Incorrect information in file: './test/t1.frm'

  This is an ambuguous case and will be fixed separately.
  We need a new TYPELIB encoding to fix this.

Details:

- unireg.cc

  The function pack_header() incorrectly used strlen() to detect
  a TYPELIB value length. Adding a new function typelib_values_packed_length()
  which uses TYPELIB::type_lengths[n] to detect the n-th value length,
  and reusing the new function in pack_header() and packed_fields_length()

- table.cc
  fix_type_pointers() assumed in multiple places that values cannot have
  0x00 inside and used strlen(TYPELIB::type_names[n]) to set
  the corresponding TYPELIB::type_lengths[n].

  Also, fix_type_pointers() did not check the encoded data for consistency.

  Rewriting fix_type_pointers() code to populate TYPELIB::type_names[n] and
  TYPELIB::type_lengths[n] at the same time, so no additional loop
  with strlen() is needed any more.

  Adding many data consistency tests.

  Fixing the main loop in fix_type_pointers() to use memchr() instead of
  strchr() to handle 0x00 properly.

  Fixing create_key_infos() to return the result in a LEX_STRING rather
  that in a char*.

Executing CHECK TABLE  with streaming replication enabled reports
error "Streaming replication not supported with
binlog_format=STATEMENT".
Administrative commands such as CHECK TABLE, are not replicated and
temporarily set binlog format to statement.
To avoid the problem, report the error only for active transactions
for which streaming replication is enabled.

MDEV-22451: SIGSEGV in __memmove_avx_unaligned_erms/memcpy from _my_b_write on CREATE after RESET MASTER

Merge branch '10.3' into 10.4

MDEV-22451: SIGSEGV in __memmove_avx_unaligned_erms/memcpy from _my_b_write on CREATE after RESET MASTER

Merge branch '10.2' into 10.3

MDEV-22451: SIGSEGV in __memmove_avx_unaligned_erms/memcpy from _my_b_write on CREATE after RESET MASTER

Merge branch '10.1' into 10.2

ins_node_create_entry_list(): Create dummy empty tuples for
corrupted or incomplete indexes, to avoid dereferencing a NULL
dict_field_t::col pointer in row_build_index_entry_low().

This issue was found by a crash in the test gcol.innodb_virtual_basic
when merging the fix to 10.5.

MDEV-22451: SIGSEGV in __memmove_avx_unaligned_erms/memcpy from _my_b_write on CREATE after RESET MASTER

Analysis:
========
RESET MASTER TO # command deletes all binary log files listed in the index
file, resets the binary log index file to be empty, and creates a new binary
log with number #. When the user provided binary log number is greater than
the max allowed value '2147483647' server fails to generate a new binary log.
The RESET MASTER statement marks the binlog closure status as
'LOG_CLOSE_TO_BE_OPENED' and exits. Statements which follow RESET MASTER
try to write to binary log they find the log_state != LOG_CLOSED and
proceed to write to binary log cache and it results in crash.

Fix:
===
During MYSQL_BIN_LOG open, if generation of new binary log name fails then the
"log_state" needs to be marked as "LOG_CLOSED". With this further statements
will find binary log as closed and they will skip writing to the binary log.

prepare_inplace_alter_table_dict(): In the error handling, relax
a debug assertion for the case that we did not execute
dict_stats_wait_bg_to_stop_using_table() yet.

Problem:
When handling a query like this:
  VALUES ('') UNION SELECT _utf16 0x0020 COLLATE utf16_bin;
Type_handler_string_result::Item_hybrid_func_fix_attributes()
tried to apply character set conversion Item_type_holder,
which causes a crash on DBUG_ASSERT(0) inside Item_type_holder::val_str().

Fix:
Overriding Item_type_holder's methods to avoid this, as follows:

  bool const_item() const { return false; }
  bool is_expensive() { return true; }

For no good reason, innodb_encryption_threads was limited to
4,294,967,295. Expectedly, the server would crash if such an
insane value was specified. Let us limit the maximum to 255.

The encryption threads are not doing much useful work.
They are basically only dirtying pages by performing
dummy writes via the redo log. The encryption key rotation
or the in-place addition or removal of encryption
will take place in the page cleaner.

In a quick test on a 20-core CPU (40 threads in total),
the sweet spot on an otherwise idle server seemed to be
innodb_encryption_threads=16 for the test
encryption.encrypt_and_grep. The new limit 255 should be
more than enough for even bigger servers.

fts_indexes field in fts_update_t never used. So replace fts_update_t
with doc_id_t in the code

MDEV-18838 : galera.galera_toi_truncate: Test failure: mysqltest: query 'reap' succeeded - should have failed with errno 1213

Test cleanup.

This is a new test from upstream that did not expect the correct value
of the command slot of the Dump thread when the latter gets killed.

The test is made to expect "Killed" string as the command
in show-processlist as it is supposed to when a thread gets killed.