Commit cdde2332 authored by Yuanxiang PAN's avatar Yuanxiang PAN Committed by Thomas Gambier

Regerate OrsTypeC v4.5 based on TypeA after Accton production modification

parent 0849cee2
Protel Design System Design Rule Check
PCB File : V:\Work\Projets\RapidSpaceLocal\orsPanHardware\hardOrsTypeC\OrsTypeC.PcbDoc
Date : 04/05/2023
Time : 11:33:00
Processing Rule : Clearance Constraint (Gap=0.35mm) (InNetClass('HighIsolation')),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.21mm) (InPolygon),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.2mm) (InNamedPolygon('TOP-GND') OR InNamedPolygon('GND-BOTTOM_PWR1')),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.12mm) (All),(IsVia)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.2mm) (InNamedPolygon('L4-+12V-2')OR InNamedPolygon('L4-+12V')OR InNamedPolygon('BOTTOM+12V')OR InNamedPolygon('BOTTOM+12V-1')OR InNamedPolygon('L6_NoNet2') OR InNamedPolygon('L6_NoNet')),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.5mm) (InNetClass('50OhmsL8tol4')),(InPolygon)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.5mm) (InNamedPolygon('L5_NoNet') OR InNamedPolygon('L6_NoNet') OR InNamedPolygon('L4_NoNet') OR InNamedPolygon('L7_NoNet')OR InNamedPolygon('L3_NoNet')),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.1mm) (InNetClass('DiffPairNetClass')),(All)
Rule Violations :0
Processing Rule : Short-Circuit Constraint (Allowed=No) (All),(All)
Rule Violations :0
Processing Rule : Un-Routed Net Constraint ( (All) )
Rule Violations :0
Processing Rule : Power Plane Connect Rule(Direct Connect )(Expansion=0.508mm) (Conductor Width=0.254mm) (Air Gap=0.254mm) (Entries=4) (All)
Rule Violations :0
Processing Rule : Width Constraint (Min=0.1mm) (Max=10mm) (Preferred=0.254mm) (All)
Rule Violations :0
Processing Rule : Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All)
Rule Violations :0
Processing Rule : Hole Size Constraint (Min=0.02mm) (Max=3.5mm) (All)
Rule Violations :0
Processing Rule : Hole To Hole Clearance (Gap=0.25mm) (All),(All)
Rule Violations :0
Processing Rule : Minimum Solder Mask Sliver (Gap=0.05mm) (All),(All)
Rule Violations :0
Processing Rule : Silk To Solder Mask (Clearance=0.2mm) (Disabled)(IsPad),(All)
Rule Violations :0
Processing Rule : Silk to Silk (Clearance=0.2mm) (Disabled)(All),(All)
Rule Violations :0
Processing Rule : Net Antennae (Tolerance=0mm) (Disabled)(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.6mm) (InNetClass('50OhmsL1toL2')),(InPolygon)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.1mm) (All),(All)
Rule Violations :0
Processing Rule : Matched Net Lengths(Tolerance=0.5mm) (InNetClass('POENetClass2'))
Rule Violations :0
Processing Rule : Matched Net Lengths(Tolerance=0.3mm) (InNetClass('POENetClass1'))
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.21mm) (InNetClass('50OhmsL8toL5')),(InPolygon)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.12mm) (InNetClass('DiffPairNetClass100Ohms_1_2')),(InPolygon)
Rule Violations :0
Violations Detected : 0
Time Elapsed : 00:02:18
\ No newline at end of file
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Protel Design System Design Rule Check
PCB File : V:\Work\Projets\RapidSpaceLocal\orsPanHardware\hardOrsTypeC\OrsTypeC.PcbDoc
Date : 04/05/2023
Time : 11:40:04
Processing Rule : Clearance Constraint (Gap=0.35mm) (InNetClass('HighIsolation')),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.21mm) (InPolygon),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.2mm) (InNamedPolygon('TOP-GND') OR InNamedPolygon('GND-BOTTOM_PWR1')),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.12mm) (All),(IsVia)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.2mm) (InNamedPolygon('L4-+12V-2')OR InNamedPolygon('L4-+12V')OR InNamedPolygon('BOTTOM+12V')OR InNamedPolygon('BOTTOM+12V-1')OR InNamedPolygon('L6_NoNet2') OR InNamedPolygon('L6_NoNet')),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.5mm) (InNetClass('50OhmsL8tol4')),(InPolygon)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.5mm) (InNamedPolygon('L5_NoNet') OR InNamedPolygon('L6_NoNet') OR InNamedPolygon('L4_NoNet') OR InNamedPolygon('L7_NoNet')OR InNamedPolygon('L3_NoNet')),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.1mm) (InNetClass('DiffPairNetClass')),(All)
Rule Violations :0
Processing Rule : Short-Circuit Constraint (Allowed=No) (All),(All)
Rule Violations :0
Processing Rule : Un-Routed Net Constraint ( (All) )
Rule Violations :0
Processing Rule : Power Plane Connect Rule(Direct Connect )(Expansion=0.508mm) (Conductor Width=0.254mm) (Air Gap=0.254mm) (Entries=4) (All)
Rule Violations :0
Processing Rule : Width Constraint (Min=0.1mm) (Max=10mm) (Preferred=0.254mm) (All)
Rule Violations :0
Processing Rule : Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All)
Rule Violations :0
Processing Rule : Hole Size Constraint (Min=0.02mm) (Max=3.5mm) (All)
Rule Violations :0
Processing Rule : Hole To Hole Clearance (Gap=0.25mm) (All),(All)
Rule Violations :0
Processing Rule : Minimum Solder Mask Sliver (Gap=0.05mm) (All),(All)
Rule Violations :0
Processing Rule : Silk To Solder Mask (Clearance=0.2mm) (Disabled)(IsPad),(All)
Rule Violations :0
Processing Rule : Silk to Silk (Clearance=0.2mm) (Disabled)(All),(All)
Rule Violations :0
Processing Rule : Net Antennae (Tolerance=0mm) (Disabled)(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.6mm) (InNetClass('50OhmsL1toL2')),(InPolygon)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.1mm) (All),(All)
Rule Violations :0
Processing Rule : Matched Net Lengths(Tolerance=0.5mm) (InNetClass('POENetClass2'))
Rule Violations :0
Processing Rule : Matched Net Lengths(Tolerance=0.3mm) (InNetClass('POENetClass1'))
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.21mm) (InNetClass('50OhmsL8toL5')),(InPolygon)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.12mm) (InNetClass('DiffPairNetClass100Ohms_1_2')),(InPolygon)
Rule Violations :0
Violations Detected : 0
Time Elapsed : 00:02:18
\ No newline at end of file
------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------
Gerber File Extension Report For: Gerber Files.GBR 04/05/2023 11:59:09 Gerber File Extension Report For: Gerber Files.GBR 7/25/2023 4:56:43 PM
------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------
Layer Extension Layer Description Layer Extension Layer Description
------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------
.GTL TOP .GTL TOP
.G1 L2 .G1 L2
.G2 L3 .G2 L3
.G3 L4 .G3 L4
.G4 L5 .G4 L5
.G5 L6 .G5 L6
.G6 L7 .G6 L7
.GBL BOTTOM .GBL BOTTOM
.GTO Top Overlay .GTO Top Overlay
.GTP Top Paste .GTP Top Paste
.GTS Top Solder .GTS Top Solder
.GBS Bottom Solder .GBS Bottom Solder
.GBP Bottom Paste .GBP Bottom Paste
.GBO Bottom Overlay .GBO Bottom Overlay
.GM1 Mechanical 1 .GM1 Mechanical 1
.GM2 Mechanical 2 .GM2 Mechanical 2
.GM3 Mechanical 3 .GM3 Mechanical 3
.GM7 SOLE_EDGE-V4 .GM7 SOLE_EDGE-V4
.GM13 DIMENSION .GM13 DIMENSION
------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------
DRC Rules Export File for PCB: V:\Work\Projets\RapidSpaceLocal\orsPanHardware\hardOrsTypeC\OrsTypeC.PcbDoc DRC Rules Export File for PCB: Z:\hardOrsTypeC\OrsTypeC.PcbDoc
RuleKind=Clearance|RuleName=HighIsolation|Scope=Board|Minimum=13.78 RuleKind=Clearance|RuleName=100OhmsL8toL1_2|Scope=Board|Minimum=3.94
RuleKind=Clearance|RuleName=PolyGon Clearance_ALL|Scope=Board|Minimum=8.27 RuleKind=Clearance|RuleName=50OhmsL8toL5|Scope=Board|Minimum=8.27
RuleKind=Clearance|RuleName=PolyGon Clearance_GND|Scope=Board|Minimum=7.87 RuleKind=Clearance|RuleName=Clearance|Scope=Board|Minimum=3.94
RuleKind=Clearance|RuleName=Clearance-Via_1|Scope=Board|Minimum=4.72 RuleKind=Clearance|RuleName=50OhmsL1toL2|Scope=Board|Minimum=23.62
RuleKind=Clearance|RuleName=PolyGon Pour Clearance_12V|Scope=Board|Minimum=7.87 RuleKind=SolderMaskExpansion|RuleName=SolderMaskExpansion|Scope=Board|Minimum=1.97
RuleKind=Clearance|RuleName=50OhmsL8toL4|Scope=Board|Minimum=19.69 RuleKind=Width|RuleName=Width|Scope=Board|Minimum=3.94
RuleKind=Clearance|RuleName=PolyGon PourClearance_NoNet|Scope=Board|Minimum=19.69 RuleKind=ShortCircuit|RuleName=ShortCircuit|Scope=Board|Allowed=0
RuleKind=Clearance|RuleName=DiffPairNetClass|Scope=Board|Minimum=3.94 RuleKind=Clearance|RuleName=DiffPairNetClass|Scope=Board|Minimum=3.94
RuleKind=ShortCircuit|RuleName=ShortCircuit|Scope=Board|Allowed=0 RuleKind=Clearance|RuleName=PolyGon PourClearance_NoNet|Scope=Board|Minimum=19.69
RuleKind=Width|RuleName=Width|Scope=Board|Minimum=3.94 RuleKind=Clearance|RuleName=50OhmsL8toL4|Scope=Board|Minimum=19.69
RuleKind=SolderMaskExpansion|RuleName=SolderMaskExpansion|Scope=Board|Minimum=1.97 RuleKind=Clearance|RuleName=PolyGon Pour Clearance_12V|Scope=Board|Minimum=7.87
RuleKind=Clearance|RuleName=50OhmsL1toL2|Scope=Board|Minimum=23.62 RuleKind=Clearance|RuleName=Clearance-Via_1|Scope=Board|Minimum=4.72
RuleKind=Clearance|RuleName=Clearance|Scope=Board|Minimum=3.94 RuleKind=Clearance|RuleName=PolyGon Clearance_GND|Scope=Board|Minimum=7.87
RuleKind=Clearance|RuleName=50OhmsL8toL5|Scope=Board|Minimum=8.27 RuleKind=Clearance|RuleName=PolyGon Clearance_ALL|Scope=Board|Minimum=8.27
RuleKind=Clearance|RuleName=100OhmsL8toL1_2|Scope=Board|Minimum=4.72 RuleKind=Clearance|RuleName=HighIsolation|Scope=Board|Minimum=13.78
M48 M48
;Layer_Color=9474304 ;Layer_Color=9474304
;FILE_FORMAT=4:3 ;FILE_FORMAT=4:3
METRIC,TZ METRIC,TZ
;TYPE=NON_PLATED ;TYPE=NON_PLATED
T7F00S00C1.000 T7F00S00C1.000
% %
T07 T07
X325250Y204650 X325250Y204650
Y209350 Y209350
X242150Y269900 X242150Y269900
X325255Y255805 X325255Y255805
Y251105 Y251105
X325250Y243850 X325250Y243850
Y239150 Y239150
X242150Y279900 X242150Y279900
M30 M30
--------------------------------------------------------------------------- ---------------------------------------------------------------------------
NCDrill File Report For: OrsTypeC.PcbDoc 04/05/2023 11:59:23 NCDrill File Report For: OrsTypeC.PcbDoc 7/25/2023 4:56:55 PM
--------------------------------------------------------------------------- ---------------------------------------------------------------------------
Layer Pair : TOP to BOTTOM Layer Pair : TOP to BOTTOM
ASCII Plated RoundHoles File : NC Drill Files-Plated.TXT ASCII Plated RoundHoles File : NC Drill Files-Plated.TXT
ASCII Non-Plated RoundHoles File : NC Drill Files-NonPlated.TXT ASCII Non-Plated RoundHoles File : NC Drill Files-NonPlated.TXT
Tool Hole Size Hole Type Hole Count Plated Tool Travel Tool Hole Size Hole Type Hole Count Plated Tool Travel
--------------------------------------------------------------------------- ---------------------------------------------------------------------------
T1 0.2mm (7.874mil) Round 2464 4600.70 mm (181.13 Inch) T1 0.2mm (7.874mil) Round 2477 4624.30 mm (182.06 Inch)
T2 0.25mm (9.842mil) Round 1798 4540.06 mm (178.74 Inch) T2 0.25mm (9.842mil) Round 1796 4581.54 mm (180.38 Inch)
T3 0.3mm (11.811mil) Round 224 929.30 mm (36.59 Inch) T3 0.3mm (11.811mil) Round 224 991.63 mm (39.04 Inch)
T4 0.5mm (19.685mil) Round 34 313.99 mm (12.36 Inch) T4 0.5mm (19.685mil) Round 34 303.82 mm (11.96 Inch)
T5 2.6mm (102.362mil) Round 17 650.39 mm (25.61 Inch) T5 2.6mm (102.362mil) Round 17 650.39 mm (25.61 Inch)
T6 3.25mm (127.953mil) Round 4 35.10 mm (1.38 Inch) T6 3.25mm (127.953mil) Round 4 35.10 mm (1.38 Inch)
T7 1mm (39.37mil) Round 8 NPTH 301.02 mm (11.85 Inch) T7 1mm (39.37mil) Round 8 NPTH 301.02 mm (11.85 Inch)
--------------------------------------------------------------------------- ---------------------------------------------------------------------------
Totals 4549 11370.57 mm (447.66 Inch) Totals 4560 11487.80 mm (452.28 Inch)
Total Processing Time (hh:mm:ss) : 00:00:02 Total Processing Time (hh:mm:ss) : 00:00:01
Layer Pairs Export File for PCB: V:\Work\Projets\RapidSpaceLocal\orsPanHardware\hardOrsTypeC\OrsTypeC.PcbDoc Layer Pairs Export File for PCB: Z:\hardOrsTypeC\OrsTypeC.PcbDoc
LayersSetName=Top_Bot_Plated_Thru_Holes|DrillFile=nc drill files-plated.txt|LayerPairs=gtl,gbl LayersSetName=Top_Bot_Plated_Thru_Holes|DrillFile=nc drill files-plated.txt|LayerPairs=gtl,gbl
LayersSetName=Top_Bot_NonPlated_Thru_Holes|DrillFile=nc drill files-nonplated.txt|LayerPairs=gtl,gbl LayersSetName=Top_Bot_NonPlated_Thru_Holes|DrillFile=nc drill files-nonplated.txt|LayerPairs=gtl,gbl
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment