"description": "Select the CPRI line bit rate in terms of multiple of option 1 (614.4 Mbps). E.g set 4 for option 3, 8 for option 5 and 16 for option 7.",
"type": "number",
"default": 16,
...
...
@@ -113,19 +119,19 @@
"title": "CPRI RX Delay",
"description": "Delays between TX and RX position in CPRI frame. This should be set to the value of (T2a + T3a - Toffset) provided by the RRH specification.",
"type": "number",
"default": 0
"default": 25.11
},
"cpri_tx_delay": {
"title": "CPRI TX Delay",
"description": "Advances Start of Frame relative to PPS to compensate for delays in transmit line and RRH. This should be set to T12 + T2a.",
"type": "number",
"default": 0
"default": 14.71
},
"cpri_tx_dbm": {
"title": "CPRI TX dBm",
"description": "Optional floating points value in dBm (default 0). Needed by ENB/GNB to have a notion of actual output power. Computed from maximum power output of the RRH for a 0dBFS input signal (full scale). ",
"type": "number",
"default": 0
"default": 63
},
"cpri_port_number": {
"title": "CPRI Port Number",
...
...
@@ -204,41 +210,35 @@
"INACTIVE"
]
},
"txa0cc00_center_frequency_earfcn": {
"title": "Lopcomm ORAN Center Frequency EARFCN (TXA0CC00)",
"description": "Lopcomm ORAN Center Frequency EARFCN (TXA0CC00)",
"type": "number",
"default": 300
},
"txa0cc00_center_frequency": {
"title": "Lopcomm ORAN Center Frequency in Hz (TXA0CC00)",
"description": "Lopcomm ORAN Center Frequency in Hz (TXA0CC00)",
"type": "number",
"default": 2140000000
},
"txa0cc00_bandwidth": {
"title": "Lopcomm ORAN bandwidth in Hz (TXA0CC00)",
"description": "Lopcomm ORAN bandwidth in Hz (TXA0CC00)",
"title": "Lopcomm ORAN DL Center Frequency in MHz (TXA0CC00)",
"description": "Lopcomm ORAN Center Frequency in MHz (TXA0CC00)",
"type": "number",
"default": 20000000
"default": 2140
},
"rxa0cc00_center_frequency_earfcn": {
"title": "Lopcomm ORAN Center Frequency EARFCN (RXA0CC00)",
"title": "Lopcomm ORAN UL Center Frequency EARFCN (RXA0CC00)",
"description": "Lopcomm ORAN Center Frequency EARFCN (RXA0CC00)",
"type": "number",
"default": 18300
},
"rxa0cc00_center_frequency": {
"title": "Lopcomm ORAN Center Frequency in Hz (RXA0CC00)",
"description": "Lopcomm ORAN Center Frequency in Hz (RXA0CC00)",
"title": "Lopcomm ORAN UL Center Frequency in MHz (RXA0CC00)",
"description": "Lopcomm ORAN Center Frequency in MHz (RXA0CC00)",
"type": "number",
"default": 1950000000
"default": 1950
},
"rxa0cc00_bandwidth": {
"title": "Lopcomm ORAN bandwidth in Hz (RXA0CC00)",
"description": "Lopcomm ORAN bandwidth in Hz (RXA0CC00)",
"txa0cc00_gain": {
"title": "ORAN Gain",
"description": "Lopcomm ORAN Gain (TXA0CC00)",
"type": "number",
"default": 20000000
"default": -20
},
"user-authorized-key": {
"title": "User Authorized Key",
"description": "SSH public key in order to connect to the SSH server of this instance.",
"textarea": true,
"type": "string"
},
{%- endif %}
"enb_id": {
...
...
@@ -247,6 +247,12 @@
"type": "string",
"default": "0x1A2D0"
},
"gtp_addr": {
"title": "GTP Address",
"description": "String. Set the IP address (and optional port) on which the GTP-U packets are received. The default port is 2152. It is normally the IP address of the network interface connected to the core network.",
"type": "string",
"default": "127.0.1.1"
},
"mme_list": {
"title": "MME list",
"description": "Optionnal. List of MME to which the gNodeB is connected",
"description":"String. Set the IP address (and optional port) on which the GTP-U packets are received. The default port is 2152. It is normally the IP address of the network interface connected to the core network.",
"type":"string",
"default":"127.0.1.1"
},
"mme_list":{
"title":"MME list",
"description":"Optionnal. List of MME to which the gNodeB is connected",
"description":"Select the CPRI line bit rate in terms of multiple of option 1 (614.4 Mbps). E.g set 4 for option 3, 8 for option 5 and 16 for option 7.",
"type":"number",
"default":16,
...
...
@@ -57,19 +63,19 @@
"title":"CPRI RX Delay",
"description":"Delays between TX and RX position in CPRI frame. This should be set to the value of (T2a + T3a - Toffset) provided by the RRH specification.",
"type":"number",
"default":0
"default":25.11
},
"cpri_tx_delay":{
"title":"CPRI TX Delay",
"description":"Advances Start of Frame relative to PPS to compensate for delays in transmit line and RRH. This should be set to T12 + T2a.",
"type":"number",
"default":0
"default":14.71
},
"cpri_tx_dbm":{
"title":"CPRI TX dBm",
"description":"Optional floating points value in dBm (default 0). Needed by ENB/GNB to have a notion of actual output power. Computed from maximum power output of the RRH for a 0dBFS input signal (full scale). ",
"type":"number",
"default":0
"default":63
},
"cpri_port_number":{
"title":"CPRI Port Number",
...
...
@@ -131,41 +137,35 @@
"INACTIVE"
]
},
"txa0cc00_center_frequency_earfcn":{
"title":"Lopcomm ORAN Center Frequency EARFCN (TXA0CC00)",
"description":"Lopcomm ORAN Center Frequency EARFCN (TXA0CC00)",
"type":"number",
"default":300
},
"txa0cc00_center_frequency":{
"title":"Lopcomm ORAN Center Frequency in Hz (TXA0CC00)",
"description":"Lopcomm ORAN Center Frequency in Hz (TXA0CC00)",
"type":"number",
"default":2140000000
},
"txa0cc00_bandwidth":{
"title":"Lopcomm ORAN bandwidth in Hz (TXA0CC00)",
"description":"Lopcomm ORAN bandwidth in Hz (TXA0CC00)",
"title":"Lopcomm ORAN DL Center Frequency in MHz (TXA0CC00)",
"description":"Lopcomm ORAN Center Frequency in MHz (TXA0CC00)",
"type":"number",
"default":20000000
"default":2140
},
"rxa0cc00_center_frequency_earfcn":{
"title":"Lopcomm ORAN Center Frequency EARFCN (RXA0CC00)",
"title":"Lopcomm ORAN UL Center Frequency EARFCN (RXA0CC00)",
"description":"Lopcomm ORAN Center Frequency EARFCN (RXA0CC00)",
"type":"number",
"default":18300
},
"rxa0cc00_center_frequency":{
"title":"Lopcomm ORAN Center Frequency in Hz (RXA0CC00)",
"description":"Lopcomm ORAN Center Frequency in Hz (RXA0CC00)",
"title":"Lopcomm ORAN UL Center Frequency in MHz (RXA0CC00)",
"description":"Lopcomm ORAN Center Frequency in MHz (RXA0CC00)",
"type":"number",
"default":1950000000
"default":1950
},
"rxa0cc00_bandwidth":{
"title":"Lopcomm ORAN bandwidth in Hz (RXA0CC00)",
"description":"Lopcomm ORAN bandwidth in Hz (RXA0CC00)",
"txa0cc00_gain":{
"title":"ORAN Gain",
"description":"Lopcomm ORAN Gain (TXA0CC00)",
"type":"number",
"default":20000000
"default":-20
},
"user-authorized-key":{
"title":"User Authorized Key",
"description":"SSH public key in order to connect to the SSH server of this instance.",
"textarea":true,
"type":"string"
},
"enb_id":{
"title":"eNB ID",
...
...
@@ -173,6 +173,12 @@
"type":"string",
"default":"0x1A2D0"
},
"gtp_addr":{
"title":"GTP Address",
"description":"String. Set the IP address (and optional port) on which the GTP-U packets are received. The default port is 2152. It is normally the IP address of the network interface connected to the core network.",
"type":"string",
"default":"127.0.1.1"
},
"mme_list":{
"title":"MME list",
"description":"Optionnal. List of MME to which the gNodeB is connected",
"description":"String. Set the IP address (and optional port) on which the GTP-U packets are received. The default port is 2152. It is normally the IP address of the network interface connected to the core network.",
"type":"string",
"default":"127.0.1.1"
},
"mme_list":{
"title":"MME list",
"description":"Optionnal. List of MME to which the gNodeB is connected",
"description":"String. Set the IP address (and optional port) on which the GTP-U packets are received. The default port is 2152. It is normally the IP address of the network interface connected to the core network.",
"type":"string",
"default":"127.0.1.1"
},
"mme_list":{
"title":"MME list",
"description":"Optionnal. List of MME to which the gNodeB is connected",
"description":"Select the CPRI line bit rate in terms of multiple of option 1 (614.4 Mbps). E.g set 4 for option 3, 8 for option 5 and 16 for option 7.",
"type":"number",
"default":16,
...
...
@@ -67,19 +73,19 @@
"title":"CPRI RX Delay",
"description":"Delays between TX and RX position in CPRI frame. This should be set to the value of (T2a + T3a - Toffset) provided by the RRH specification.",
"type":"number",
"default":0
"default":25.11
},
"cpri_tx_delay":{
"title":"CPRI TX Delay",
"description":"Advances Start of Frame relative to PPS to compensate for delays in transmit line and RRH. This should be set to T12 + T2a.",
"type":"number",
"default":0
"default":14.71
},
"cpri_tx_dbm":{
"title":"CPRI TX dBm",
"description":"Optional floating points value in dBm (default 0). Needed by ENB/GNB to have a notion of actual output power. Computed from maximum power output of the RRH for a 0dBFS input signal (full scale). ",
"type":"number",
"default":0
"default":63
},
"cpri_port_number":{
"title":"CPRI Port Number",
...
...
@@ -127,6 +133,12 @@
"type":"string",
"default":"0x1A2D0"
},
"gtp_addr":{
"title":"GTP Address",
"description":"String. Set the IP address (and optional port) on which the GTP-U packets are received. The default port is 2152. It is normally the IP address of the network interface connected to the core network.",
"type":"string",
"default":"127.0.1.1"
},
"mme_list":{
"title":"MME list",
"description":"Optionnal. List of MME to which the gNodeB is connected",
"description":"String. Set the IP address (and optional port) on which the GTP-U packets are received. The default port is 2152. It is normally the IP address of the network interface connected to the core network.",
"type":"string",
"default":"127.0.1.1"
},
"mme_list":{
"title":"MME list",
"description":"Optionnal. List of MME to which the gNodeB is connected",
