Changes following up nexedi/slapos!985

It seems the logo is a bit bigger, or at least a bit different

See merge request nexedi/erp5!1424

When running OCR, we sometimes have issues because processing is "too heavy":
 - [x] use 2 or 3 Go of disk space for a one page PDF created by erp5_document_scanner, because we convert pdf -> png -> tiff before sending to tesseract. Modern Ghostscript supports running tesseract directly, so we use it if it's available.
 - [x] use 300% of CPU. Fixed by setting `OMP_THREAD_LIMIT` when running tesseract. This will only apply when OCR from Images. OCR embedded in Ghostscript does not seem to need this.
 - [x] ... and often crash, so is restarted. This is fixed by updated tesseract.

Updates of ghostscript and tesseract are part of nexedi/slapos!985

See merge request nexedi/erp5!1420

By relying on PIL after our monkey-patched OFS.Image.getImageInfo.

We keep this monkey-patch for now, because it adds supports to svg

See merge request nexedi/erp5!1426

Since 7f32f8cd (erp5_dms: Add PDF Reader using the pdf.js, 2016-06-24)
we have a PDF preview with a javascript PDF view, which is much better way
of viewing PDF.

This commit made the Thumbnail preview obsolete, also it does not really
work on ERP5JS, so remove the thumbnail preview.

See commit ec3c9cbc.

For historical reasons, PDF to text involved conversion first of the PDF to
png, then this png to tiff and the tiff was sent to tesseract. This works, but
it consumes a lot of resources with large PDFs, especially because the
intermediate png/tiff are created with a resolution of 300 DPI, which easily
needs serveral Go of RAM and temporary disk space.
This was obsorved with the PDF created by erp5_document_scanner, which are
usually high quality (1 or 2Mo per page) and even a one page PDF sometimes
took more than one minute to OCR.

Since 9.53 ghostscript integrates tesseract engine directly, we don't need to
prepare a tiff beforehand, we can directly send the PDF data to ghostscript.

These change use ghostscript if available and otherwise fallback to the same
pipeline as before. This will allow the transition until all ERP5 instances
are running a recent enough SlapOS with ghostscript 9.54. Fortunately, before
SlapOS include ghostscript 9.54, ERP5 software release did not have ghostscript
in $PATH, so we don't have to check ghostscript version, we assume that if gs
is in $PATH, it means we have a recent enough SlapOS.

This new approach was less tolerant regarding broken/password-protected PDFs
so we perform a new check that the PDF is valid and not encrypted before
trying to use OCR.

See merge request nexedi/erp5!1429

Wendelin.core is now integral part of ERP5 (see [1,2]), but nothing
inside ERP5 currently uses it. And even though wendelin.core has its own
testsuite, integration problems are always possible.

-> Add test to erp5_core_test that minimally makes sure that basic
wendelin.core operations work.

This test currently passes with wendelin.core 1, which is the default.
It also passes as live test with wendelin.core 2.
However with wendelin.core 2 it currently fails on testnodes like e.g.

    ValueError: ZODB.MappingStorage.MappingStorage is in-RAM storage
	in-RAM storages are not supported:
	a zurl pointing to in-RAM storage in one process would lead to
	another in-RAM storage in WCFS process.

and

    RuntimeError: wcfs: join file:///srv/slapgrid/slappart8/srv/testnode/djk/test_suite/unit_test.2/var/Data.fs: server not started
    (https://nexedijs.erp5.net/#/test_result_module/20210530-92EF3124/102)

because we need to amend ERP5 test driver

1) to run tests on a real storage instead of in-RAM Mapping Storage(*), and
2) to spawn WCFS server for each such storage.

I will try to address those points in a later patch.

In the meantime there should be no reason not to merge this, because we
do not use wendelin.core 2 yet, and solving "1" and "2" first are
preconditions to begin such a usage.

/cc @rafael, @tomo, @seb, @jerome, @romain, @vpelletier, @Tyagov, @klaus, @jp

(*) Combining Zope and WCFS working together requires data to be on a real
    storage, not on in-RAM MappingStorage inside Zope's Python process.

[1] nexedi/slapos@7f877621
[2] nexedi/slapos!874 (comment 122339)

We don't want to show the ID which has a prefix, but the reference

See merge request nexedi/erp5!1427

By default, tesseract runs on 4 CPU and this can be controlled by
OMP_THREAD_LIMIT=1 to run on only one CPU (as documented on
https://tesseract-ocr.github.io/tessdoc/FAQ.html)

In ERP5, we tend to use one zope node per CPU, so we don't want each
of these zope nodes to spawn a process which will run on 4 CPU.

In a quick benchmark it's not slower, even a bit faster to disable threads:

    ## a big image in france (a picture of an invoice)
    $ time ./bin/tesseract /tmp/input.tiff /tmp/out.txt
    Tesseract Open Source OCR Engine v4.1.1 with Leptonica
    Page 1
    Error in pixClipBoxToForeground: box not within image
    Error in pixClipBoxToForeground: box not within image

    ________________________________________________________
    Executed in   14.41 secs   fish           external
      usr time   27.88 secs  1002.00 micros   27.88 secs
      sys time    0.74 secs    0.00 micros    0.74 secs

    $ time OMP_THREAD_LIMIT=1 ./bin/tesseract /tmp/input.tiff /tmp/out.txt
    Tesseract Open Source OCR Engine v4.1.1 with Leptonica
    Page 1
    Error in pixClipBoxToForeground: box not within image
    Error in pixClipBoxToForeground: box not within image

    ________________________________________________________
    Executed in   12.58 secs   fish           external
      usr time   11.84 secs  955.00 micros   11.84 secs
      sys time    0.52 secs  503.00 micros    0.52 secs

    ## a small japanese image

    $ time ./tesseract -l jpn+eng /tmp/inputjp.tiff /tmp/out.txt
    Tesseract Open Source OCR Engine v4.1.1 with Leptonica
    Page 1

    ________________________________________________________
    Executed in    2.16 secs   fish           external
      usr time    3.77 secs  590.00 micros    3.77 secs
      sys time    0.27 secs  209.00 micros    0.27 secs

    $ time OMP_THREAD_LIMIT=1 ./tesseract -l jpn+eng /tmp/inputjp.tiff /tmp/out.txt
    Tesseract Open Source OCR Engine v4.1.1 with Leptonica
    Page 1

    ________________________________________________________
    Executed in    2.02 secs   fish           external
      usr time  1766.07 millis  1437.00 micros  1764.63 millis
      sys time  214.06 millis  522.00 micros  213.54 millis

because DMS extends image portal types with interaction workflows etc,
it's better to also cover the case where DMS is installed.

This fixes problem that some formats such as tiff were not supported.

testSQLCachedWorklist is now part of a dedicated erp5_worklist_sql_test
business template.

We had two mimetypes entries, which caused inconsistencies depending on
wether the lookup was done by mimetype, by glob or by extension.

We had:

- name:
   "Windows BMP image"
- mimetypes:
    image/bmp
    image/x-bmp
    image/x-MS-bmp
- extensions:
- globs:
    *.bmp

and

- name:
   "image/x-ms-bmp"
- mimetypes:
    image/x-ms-bmp
- extensions:
    bmp
- globs:

With this commit they are merged into one:

- name:
   "Windows BMP image"
- mimetypes:
    image/x-ms-bmp
    image/bmp
    image/x-bmp
    image/x-MS-bmp
- extensions:
    bmp
- globs:
    *.bmp

This way we only have one consistent mimetype.

For compatibility with extension lookups (that are done in
Document_guessMimeType interaction workflow from DMS), image/x-ms-bmp is
kept as default. This might not be the best choice, according to
https://www.iana.org/assignments/media-types/media-types.xhtml

This script creates Web Message, not Mail Message

See merge request !1411

When updating ghostscript, the rendering of images seems slightly different, as we can observe on the logos.

Fixes [#20210517-960A47](https://erp5js.nexedi.net/#/bug_module/20210517-960A47)

The most important changes are:
 - coding style is enabled again for workflow scripts and starts to be enabled for ERP5 Python scripts
 - monaco editor support for workflow scripts, SQL methods and .less
 - small fixes for python/workflow scripts forms and ZMI

See merge request nexedi/erp5!1422

Changing state directly in Base_contribute was only functional for the case
where metadata was discovered asynchronously. In the case of synchronous
discovery, the state was first changed state, and Document_convertToBaseFormatAndDiscoverMetadata
was executed - but this this was causing Unauthorized like this:

      Module script, line 10, in Document_convertToBaseFormatAndDiscoverMetadata
      - <PythonScript at /erp5/Document_convertToBaseFormatAndDiscoverMetadata used for /erp5/document_module/163>
      - Line 10
        return context.discoverMetadata(filename=filename,
    Unauthorized: You are not allowed to access 'discoverMetadata' in this context

because once we have already changed state, regular user no longer have
permission to access discoverMetadata, because that method needs ModifyPortalContent
permission.

Instead, of handling publication_state only in Base_contribute, treat it
like others user input parameter and change state during discovery.

Tests were also re-organised to move Base_contribute related test in testIngestion
and also to run Base_contribute tests as a non-manager user.

This was never supported, we support only [state in $workflow_id]

See also:

  https://erp5js.nexedi.net/#/bug_module/1740

  b6dcbc19 (l10n_fr,l10n_jp: Fix translation of "Open", 2021-04-30)

Generated from this script:

    #!/srv/slapgrid/slappart3/srv/runner/software/cc0326f0dcb093f56c01291c300c8481/parts/erp5/venv/bin/python

    import polib
    import sys
    import re

    pofile = polib.pofile(sys.argv[1])

    msgs = dict()
    for entry in pofile:
      msgs[entry.msgid] = entry.msgstr

    transition_re = re.compile(r'(.*) \[transition in .*\]')

    fixed_messages = dict()
    for entry in pofile:
      match = transition_re.match(entry.msgid)
      if match:
        # in erp5_l10n_de some msgstr also have the [transition in ...], we drop them
        if transition_re.match(entry.msgstr):
          continue
        short = match.groups()[0]
        if short.endswith('Action'):
          continue
        if short not in msgs:
          print(f"🤔  {short} not translated ( from {entry.msgid} )")
          fixed_messages[short] = entry.msgstr
      else:
        fixed_messages[entry.msgid] = entry.msgstr

    pofile.clear()
    for k, v in fixed_messages.items():
      pofile.append(polib.POEntry(msgid=k, msgstr=v))

    pofile.save(sys.argv[1])

    import subprocess
    subprocess.check_output(
      [
        '/opt/slapos-shared/gettext/4df93a547efd86e0eb70495b88a5d3b1/bin/msgattrib',
        sys.argv[1],
        "--no-fuzzy",
        "--translated",
        "-s",
        "--no-wrap",
        "-o",
        sys.argv[1]

      ]
    )

using:

    msgattrib translation.po --no-fuzzy --translated -s --no-wrap -o translation.po

translated_title is used in listbox search columns, so it's very confusing
for users if they can not use the usual % character for partial matches.

This changes the behaviour of translated_title to autodetect the presence of
% and use LIKE comparison operator in such case.

these ERP5 Python Scripts were not covered by coding style tests

This ERP5 Python script was not checked until now, and add wrong indentation

The ID is calculated from reference, showing reference is enough.
There is no "callable_type" property on workflow script

Don't hardcode a few roles, use the API to get all roles

Only zope Python Scripts were checked

the convention is to use a my_ or your_ prefix

This is only supported in monaco editor

use syntax highlighting for SQL language, not really correct because of
dtml, but probably better than plain text

 - fix order of ZMI tabs to make `Edit` the default
 - enable ZMI code editor
 - add an icon
 - fix links to python scripts in BusinessTemplate_getPythonSourceCodeMessageList

this field did not use a (my_ / your_) prefix