Skip to content

slapos
slapos
Commit 6513d4d7 authored by Lu Xu's avatar Lu Xu 👀
Browse files
Options

software/ors-amarisoft: add FDD support

parent 0ad64e49
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1306 additions and 1592 deletions
software/ors-amarisoft/config/enb-fdd.jinja2.cfg deleted 100644 → 0
View file @ 0ad64e49
This diff is collapsed.
software/ors-amarisoft/config/gnb-fdd.jinja2.cfg deleted 100644 → 0
View file @ 0ad64e49
This diff is collapsed.
software/ors-amarisoft/instance-fdd-enb-input-schema.json 0 → 100644
View file @ 6513d4d7
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rrh": {
"title": "RRH",
"description": "RRH",
"type": "string",
"default": "SDR",
"enum": [
"SDR",
"Lopcomm ORAN"
]
},
"cpri_mult": {
"title": "cpri_mult",
"description": "Select the CPRI line bit rate in terms of multiple of option 1 (614.4 Mbps). E.g set 4 for option 3, 8 for option 5 and 16 for option 7.",
"type": "number",
"default": 16
},
"cpri_rx_delay": {
"title": "cpri_rx_delay",
"description": "Delay between TX and RX position in CPRI frame. This should be set to the value of (T2a + T3a - Toffset) provided by the RRH specification.",
"type": "number",
"default": 0
},
"cpri_tx_delay": {
"title": "cpri_tx_delay",
"description": "Advance Start of Frame relative to PPS to compensate for delays in transmit line and RRH. This should be set to T12 + T2a.",
"type": "number",
"default": 0
},
"cpri_tx_dbm": {
"title": "cpri_tx_dbm",
"description": "Optional floating point value in dBm (default 0). Needed by ENB/GNB to have a notion of actual output power. Computed from maximum power output of the RRH for a 0dBFS input signal (full scale). ",
"type": "number",
"default": 0
},
"dnsmasq": {
"default": false,
"title": "dnsmasq",
"description": "dnsmasq",
"type": "boolean"
},
"rrh_mac_addr": {
"default": "00:0a:00:00:10:20",
"title": "RRH MAC address",
"description": "RRH MAC address used for DNSMASQ",
"type": "string"
},
"txa0cc00_active": {
"title": "Lopcomm ORAN TX array carriers (TXA0CC00)",
"description": "Activate or inactivate Lopcomm ORAN TX array carriers (TXA0CC00)",
"type": "string",
"default": "INACTIVE",
"enum": [
"ACTIVE",
"INACTIVE"
]
},
"rxa0cc00_active": {
"title": "Lopcomm ORAN RX array carriers (RXA0CC00)",
"description": "Activate or inactivate Lopcomm ORAN RX array carriers (RXA0CC00)",
"type": "string",
"default": "INACTIVE",
"enum": [
"ACTIVE",
"INACTIVE"
]
},
"txa0cc00_center_frequency_earfcn": {
"title": "Lopcomm ORAN Center Frequency EARFCN (TXA0CC00)",
"description": "Lopcomm ORAN Center Frequency EARFCN (TXA0CC00)",
"type": "number",
"default": 300
},
"txa0cc00_center_frequency": {
"title": "Lopcomm ORAN Center Frequency in Hz (TXA0CC00)",
"description": "Lopcomm ORAN Center Frequency in Hz (TXA0CC00)",
"type": "number",
"default": 2140000000
},
"txa0cc00_bandwidth": {
"title": "Lopcomm ORAN bandwidth in Hz (TXA0CC00)",
"description": "Lopcomm ORAN bandwidth in Hz (TXA0CC00)",
"type": "number",
"default": 20000000
},
"rxa0cc00_center_frequency_earfcn": {
"title": "Lopcomm ORAN Center Frequency EARFCN (RXA0CC00)",
"description": "Lopcomm ORAN Center Frequency EARFCN (RXA0CC00)",
"type": "number",
"default": 18300
},
"rxa0cc00_center_frequency": {
"title": "Lopcomm ORAN Center Frequency in Hz (RXA0CC00)",
"description": "Lopcomm ORAN Center Frequency in Hz (RXA0CC00)",
"type": "number",
"default": 1950000000
},
"rxa0cc00_bandwidth": {
"title": "Lopcomm ORAN bandwidth in Hz (RXA0CC00)",
"description": "Lopcomm ORAN bandwidth in Hz (RXA0CC00)",
"type": "number",
"default": 20000000
},
"log_phy_debug": {
"title": "Physical layer log debug",
"description": "Enable debug mode for physical layer logs",
"type": "boolean",
"default": false
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number",
"default": 60
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number",
"default": 45
},
"gps_sync": {
"default": false,
"title": "GPS synchronisation",
"description": "True if GPS should be used for synchronisation",
"type": "boolean"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type": "number",
"default": 0
},
"n_rb_dl": {
"title": "DL RB",
"description": "number of DL resource blocks",
"type": "number",
"default": 100
},
"mme_list": {
"title": "MME list",
"description": "Optionnal. List of MME to which the gNodeB is connected",
"patternProperties": {
".*": {
"properties": {
"mme_addr": {
"title": "MME Address",
"description": "IP address (and optional port) of S1AP SCTP connection to the MME. The default port is 36412.",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"enb_id": {
"title": "eNB ID",
"description": "eNB ID",
"type": "string",
"default": "0x1A2D0"
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID",
"type": "number",
"default": 1
},
"plmn_list": {
"title": "PLMN list",
"description": "List of PLMNs broadcasted by the eNodeB, at most 6 (default: 00101)",
"patternProperties": {
".*": {
"properties": {
"plmn": {
"default": "00101",
"title": "Public Land Mobile Network",
"description": "Public Land Mobile Network",
"type": "string"
},
"attach_without_pdn": {
"default": false,
"title": "Attach Without PDN",
"description": "Optional boolean. Indicates if PLMN supports attach without PDN connectivity.",
"type": "boolean"
},
"reserved": {
"default": false,
"title": "Reserved",
"description": "True if the cell is reserved for operator use.",
"type": "boolean"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"inactivity_timer": {
"title": "Inactivity Timer",
"description": "Send RRC connection release after this time (in ms) of network inactivity.",
"type": "number",
"default": 10000
},
"use_ipv4": {
"default": false,
"title": "Use IPv4",
"description": "Set to true to use IPv4 for AMF / MME addresses",
"type": "boolean"
},
"enb_stats_fetch_period": {
"title": "eNB statistics fetch period (seconds)",
"description": "Describes how often a call to Amarisoft remote API is made to get eNB statistics",
"type": "number",
"default": 60
},
"enb_drb_stats_enabled": {
"title": "Enable eNB drb statistics",
"description": "Enable eNB drb statistics through 100Hz polling, needed for E-UTRAN IP Throughput KPI",
"type": "boolean",
"default": true
},
"max_rx_sample_db": {
"title": "Maximum RX sample value (dB)",
"description": "Maximum RX sample threshold above which RX saturated promise will fail",
"type": "number",
"default": 0
},
"min_txrx_delay": {
"title": "Minimum available time for radio front end processing (ms)",
"description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (higher than this value)",
"type": "number",
"default": 5
},
"avg_txrx_delay": {
"title": "Average available time for radio front end processing (ms)",
"description": "Baseband latency promise will fail if average TX/RX diff reaches threshold (higher than this value)",
"type": "number",
"default": 7
}
}
}
software/ors-amarisoft/instance-fdd-gnb-input-schema.json 0 → 100644
View file @ 6513d4d7
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"log_phy_debug": {
"title": "Physical layer log debug",
"description": "Enable debug mode for physical layer logs",
"type": "boolean",
"default": false
},
"nr_handover_a3_offset": {
"title": "A3 offset for NR handover",
"description": "RSRP gain offset between gNBs which will trigger handover",
"type": "number",
"default": 6
},
"nr_handover_time_to_trigger": {
"title": "Time to Trigger for NR handover",
"description": "Time to triger after which NR handover will be triggerd if A3 offset is reached",
"type": "number",
"enum": [
0,
40,
64,
80,
100,
128,
160,
256,
320,
480,
512,
640,
1024,
1280,
2560,
5120
],
"default": 100
},
"tdd_ul_dl_config": {
"title": "TDD",
"description": "TDD",
"type": "string",
"enum": [
"5ms 2UL 7DL 4/6 (default)",
"2.5ms 1UL 3DL 2/10"
],
"default": "5ms 2UL 7DL 4/6 (default)"
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number",
"default": 60
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number",
"default": 45
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"gps_sync": {
"default": false,
"title": "GPS synchronisation",
"description": "True if GPS should be used for synchronisation",
"type": "boolean"
},
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "number",
"default": 0
},
"nr_band": {
"title": "NR band",
"description": "NR band number",
"type": "number",
"default": 0
},
"nr_bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number",
"default": 40
},
"amf_list": {
"title": "AMF list",
"description": "Optionnal. List of AMF to which the gNodeB is connected",
"patternProperties": {
".*": {
"properties": {
"amf_addr": {
"title": "AMF Address",
"description": "IP address (and optional port) of NGAP SCTP connection to the AMF. The default port is 38412.",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"ncell_list": {
"title": "Neighbour Cell Info",
"description": "Neighbour Cell Info",
"patternProperties": {
".*": {
"properties": {
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the neighbour cell",
"type": "number"
},
"ssb_nr_arfcn": {
"title": "SSB NR ARFCN",
"description": "SSB NR Absolute Radio Frequency Channel Number of the neighbour cell",
"type": "number"
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID of the neighbour cell",
"type": "number"
},
"nr_cell_id": {
"title": "NR Cell ID",
"description": "Concatenation of gnb_id and cell_id of the neighbour cell",
"type": "string"
},
"gnb_id_bits": {
"title": "gNB ID bits",
"description": "Number of bits for the gNodeB global identifier. (range 22 to 32)",
"type": "number"
},
"nr_band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"tac": {
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"xn_peers": {
"title": "XN Peers",
"description": "XN Peers",
"patternProperties": {
".*": {
"properties": {
"xn_addr": {
"title": "XN Address",
"description": "XN Address of the neighbour cell (gNB Address)",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"gnb_id": {
"title": "gNB ID",
"description": "gNB ID",
"type": "string",
"default": "0x12345"
},
"gnb_id_bits": {
"title": "gNB ID bits",
"description": "Number of bits for the gNodeB global identifier. (range 22 to 32)",
"type": "number",
"default": 28
},
"cell_id": {
"title": "Cell ID",
"description": "Cell ID",
"type": "string",
"default": "0x01"
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID",
"type": "number",
"default": 500
},
"ssb_pos_bitmap": {
"title": "SSB Position Bitmap",
"description": "SSB position bitmap in bits (4, 8 or 64 bits depending on the DL frequency).",
"type": "string",
"default": 10000000
},
"plmn_list": {
"title": "PLMN list",
"description": "List of PLMNs broadcasted by the gNodeB, at most 12 (default: 00101)",
"patternProperties": {
".*": {
"properties": {
"plmn": {
"default": "00101",
"title": "Public Land Mobile Network",
"description": "Public Land Mobile Network",
"type": "string"
},
"tac": {
"default": 100,
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
},
"ranac": {
"title": "Optional integer (range 0 to 255)",
"description": "RAN Area Code",
"type": "number"
},
"reserved": {
"default": false,
"title": "Reserved",
"description": "True if the cell is reserved for operator use.",
"type": "boolean"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"nssai": {
"title": "AMF slices configuration",
"description": "AMF slices configuration.",
"patternProperties": {
".*": {
"properties": {
"sst": {
"default": 1,
"title": "Slice Service Type",
"description": "Integer (range 1 to 255).",
"type": "number"
},
"sd": {
"default": 50,
"title": "Slice Differentiator",
"description": "Optional integer (range 0 to 0xFFFFFE)",
"type": "number"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"inactivity_timer": {
"title": "Inactivity Timer",
"description": "Send RRC connection release after this time (in ms) of network inactivity.",
"type": "number",
"default": 10000
},
"use_ipv4": {
"default": false,
"title": "Use IPv4",
"description": "Set to true to use IPv4 for AMF / MME addresses",
"type": "boolean"
},
"gnb_stats_fetch_period": {
"title": "gNB statistics fetch period (seconds)",
"description": "Describes how often a call to Amarisoft remote API is made to get gNB statistics",
"type": "number",
"default": 60
},
"gnb_drb_stats_enabled": {
"title": "Enable gNB drb statistics",
"description": "Enable gNB drb statistics through 100Hz polling, needed for E-UTRAN IP Throughput KPI",
"type": "boolean",
"default": true
},
"max_rx_sample_db": {
"title": "Maximum RX sample value (dB)",
"description": "Maximum RX sample threshold above which RX saturated promise will fail",
"type": "number",
"default": 0
},
"min_txrx_delay": {
"title": "Minimum available time for radio front end processing (ms)",
"description": "Minimum TX/RX diff threshold above which baseband latency promise will fail",
"type": "number",
"default": 5
},
"avg_txrx_delay": {
"title": "Average available time for radio front end processing (ms)",
"description": "Average TX/RX diff threshold above which baseband latency promise will fail",
"type": "number",
"default": 7
}
}
}
software/ors-amarisoft/instance-fdd-ue-lte-input-schema.json 0 → 100644
View file @ 6513d4d7
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number",
"default": 60
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number",
"default": 45
},
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type": "number",
"default": 0
},
"n_rb_dl": {
"title": "DL RB",
"description": "number of DL resource blocks",
"type": "number",
"default": 100
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
software/ors-amarisoft/instance-fdd-ue-nr-input-schema.json 0 → 100644
View file @ 6513d4d7
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number",
"default": 60
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number",
"default": 45
},
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "number",
"default": 0
},
"nr_band": {
"title": "NR band",
"description": "NR band number",
"type": "number",
"default": 0
},
"nr_bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number",
"default": 40
},
"ssb_nr_arfcn": {
"title": "SSB NR ARFCN",
"description": "SSB NR ARFCN, you can retrieve from ENB/GNB side",
"type": "number",
"default": 0
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
software/ors-amarisoft/software-fdd.cfg 0 → 100644
View file @ 6513d4d7
# This file was generated using a jinja2 template and the render-templates script, don't modify directly.
[buildout]
extends =
software-base.cfg
[default-params]
default-dl-earfcn = 0
default-lte-dl-freq = 0.0
default-lte-band = 0
default-lte-n-rb-dl = 100
default-lte-tx-gain = 60
default-lte-rx-gain = 45
default-lte-inactivity-timer = 10000
default-lte-imsi = 001010123456789
default-lte-k = 00112233445566778899aabbccddeeff
default-dl-nr-arfcn = 0
default-nr-band = 0
default-nr-dl-freq = 0.0
default-nr-bandwidth = 40
default-nr-tx-gain = 60
default-nr-rx-gain = 45
default-nr-ssb-pos-bitmap = 10000000
default-ssb-nr-arfcn = 0
default-nr-inactivity-timer = 10000
default-nr-imsi = 001010123456789
default-nr-k = 00112233445566778899aabbccddeeff
min-frequency = 0
max-frequency = 0
default-n-antenna-dl =2
default-n-antenna-ul =2
[rf-mode]
rf-mode = fdd
software/ors-amarisoft/software-fdd.cfg.json 0 → 100644
View file @ 6513d4d7
{
"name": "ORS Amarisoft",
"description": "4G and 5G amarisoft stack for ORS",
"serialisation": "json-in-xml",
"software-type": {
"enb": {
"title": "eNB",
"software-type": "enb",
"description": "eNodeB Configuration",
"request": "instance-fdd-enb-input-schema.json",
"response": "instance-fdd-enb-schema.json",
"index": 0
},
"gnb": {
"title": "gNB",
"software-type": "gnb",
"description": "gNodeB Configuration",
"request": "instance-fdd-gnb-input-schema.json",
"response": "instance-fdd-gnb-schema.json",
"index": 1
},
"core-network": {
"title": "Core Network",
"software-type": "core-network",
"description": "Core Network Configuration",
"request": "instance-core-network-input-schema.json",
"response": "instance-core-network-schema.json",
"index": 2
},
"core-network-slave": {
"title": "Core Network Sim Card",
"description": "Core Network Sim Card Configuration",
"software-type": "core-network",
"request": "instance-core-network-slave-input-schema.json",
"response": "instance-core-network-slave-schema.json",
"shared": true,
"index": 3
}
}
}
software/ors-amarisoft/test/testFDD.py 0 → 100644
View file @ 6513d4d7
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7