It stopped to be used after 49ce8ef5 (software/ors-amarisoft: Provide dedicated
TAP interface for each Radio Unit).

/cc @lu.xu, @tomo, @xavier_thompson, @Daetalus
/reviewed-by @jhuge
/reviewed-on nexedi/slapos!1512

Because

1) those services are needed and used only by ru/ promises like check_cpri_lock
   and check_rx_saturated.
2) in general we will need to initialize and setup radio units not only in eNB -
   for example UEsim will use the same code library to initialize radio units.
   Thus the proper place to keep everything required for RU to be operational have to
   be located inside ru/ and activated by that radio-units library.

Push corresponding code from instance-enb to ru/ and do only minor adjustments
to instance-gnb trying not to break it, since gnb does not currently use rulib,
and because in the future gnb will be replaced by enb which will be serving
both lte and nr cells in the same service.

/cc @lu.xu, @tomo, @xavier_thompson, @Daetalus
/reviewed-by @jhuge
/reviewed-on nexedi/slapos!1511

Because:

- ssh server is needed for and used by ru/lopcomm/ only
- in general we will need to initialize and setup radio units not only in eNB -
  for example UEsim will use the same code library to initialize radio units.
  Thus the proper place to keep everything required for RU to be operational have to
  be located inside ru/ and activated by that radio-units library.

/cc @lu.xu, @tomo, @xavier_thompson, @Daetalus
/reviewed-by @jhuge
/reviewed-on nexedi/slapos!1510

Dnsmasq insists on dhcp-range's prefixlen to be at most 64, which
triggers the following error if original slaptap is wider than that:

    dnsmasq: prefix length must be at least 64 at line 5 of /srv/slapgrid/slappart6/etc/dnsmasq.cfg

-> Fix it by capping provided range to /64

/cc @tomo, @xavier_thompson, @Daetalus
/reported-by @lu.xu
/reviewed-by @jhuge
/reviewed-on nexedi/slapos!1509

our new nexedi.org currently no longer serve static pages with links,
using absolute links should allow us to have test passing until this is
fixed.

These partition references should be kept short, they are a mechanism
to use a short path for unix sockets, because unix socket paths can not
exceed 108 characters.

When running the test in theia, this was causing errors:

   # [ALERT]    (100453) : config : parsing [/srv/slapgrid/slappart15/srv/runner/instance/slappart7/tmp/inst/with-max-rlimit-nofile6/etc/haproxy.cfg:37] : log : socket path '/srv/slapgrid/slappart15/srv/runner/instance/slappart7/tmp/inst/with-max-rlimit-nofile6/var/run/log.sock' too long (max 97

Currently, due to ensure_ascii=True default of json.dumps, we are
insisting on our JSON schemas to be ascii-only and all other characters
to be represented by \uxxxx escapes. So far this was not problematic as
all our schemas contains only ASCII characters, but upcoming
ors-amarisoft changes want to use e.g. "→" symbol:

    https://lab.nexedi.com/kirr/slapos/blob/b51f5523/software/ors-amarisoft/software.cfg.json#L15

which currently results in failure of json-schema test:

    FAIL: test_ors-amarisoft_software_cfg_json_format (slapos.test.test_json_schema.TestJSONSchemaValidation)
    ...

    First differing element 14:
    '      "title": "\\u2192  eNB/gNB | Radio Unit",'
    '      "title": "→  eNB/gNB | Radio Unit",'

And in general, in 2023 I think there is no reason to insist on our schemas to
be ASCII-only: say if one wants to describe something about "α" parameter. It
would be good to use that α character directly and seeing it in the editor,
instead of using escapes all the time.

As indicated by below stackoverflow answer "JSON spec requires UTF-8 support by
decoders": https://stackoverflow.com/a/594881/9456786 , and indeed checking
JSON specification also confirms that by default JSON decoders shall use UTF-8:

    https://datatracker.ietf.org/doc/html/rfc7159#section-8.1

This way, I think, we can switch to UTF-8 safely.

/reviewed-by @jerome, @lu.xu
/reviewed-on nexedi/slapos!1498

See merge request nexedi/slapos!1499

/reviewed-by @kirr and @jerome
/reviewed-on nexedi/slapos!1494

wendelin.core 2.0.alpha3.post9 supports golang 1.21: with this new
version we can set golang 1.21 as the new default.

/reviewed-by @kirr and @jerome
/reviewed-on nexedi/slapos!1494

Go1.21 already has the fifth minor revision (released 2023-12-05) and
should therefore already be sufficiently stable. Furthermore we need it
to fix a bug in a NEO/go dependency [1].

Please find all details in the official release note:

    https://go.dev/doc/go1.21

It was released on 2023-08-08 [2]. Due to the go promise of compatibility
most software should still compile without any problems.

In golang < 1.21 we needed to patch golang to fix
https://github.com/golang/go/issues/42525. In golang 1.21 we still need
to apply a fix, but can't apply the old patch because the code changed.
In golang > 1.21 this problem is already fixed with https://go-review.googlesource.com/c/go/+/520055.

Because of https://github.com/golang/go/commit/092671423cd95eaa6df93eb29442fef41504d097
'TestUnshareMountNameSpace' fails on golang 1.21 [3]. In golang 1.20 this test
was skipped [4]. To fix this failure the additional patch
'skip-unshare-mount-test.patch' has been added.

---

[1] nexedi/wendelin.core!22 (comment 195769)]
[2] https://go.dev/doc/devel/release
[3] --- FAIL: TestUnshareMountNameSpace (0.18s)
    exec_linux_test.go:243: unshare failed: exit status 2
        unshare: mount /tmp/TestUnshareMountNameSpace2210137852/001 failed: 0x1
[4] === RUN TestUnshareMountNameSpace exec_linux_test.go:333: kernel prohibits unshare in unprivileged process, unless using user namespace — SKIP: TestUnshareMountNameSpace (0.00s)

/reviewed-by @kirr and @jerome
/reviewed-on nexedi/slapos!1494

This version is compatible with gcc 12

using https://github.com/ilevkivskyi/com2ann

drop versions not running on debian 12 and add new versions

This was disabled to "keep compatibility with current font selection
problems", but I don't think we need to care about compatibility for
this. This was anyway causing a problem that system fontconfig will be
used if it's available, so it's better to define things explictly to
prevent falling back to system configuration.

This caused cloudooo to select different fonts, because LibreOffice-bin
comes with some Noto fonts and fontconfig now prefers Noto font

Testing conversion of HTML with font-family:"FontFamily FontVariant"
CSS rule does not really make sense. Remove a few cases for which the
behavior is not stable.

Using RegExp to validate hostnames is a bad practice, and has a lot of reasons to be wrong.
On top of that, the JSON Schema specification allows, since draft 7, to validate hostnames
against an IDN hostname, by using the `idn-hostname` format.

With these changes, IDN are now supported (.рф and .中國 for instance), and long TLD
should not be a problem anymore.

With backported fixes so that old software supports debian 12

In 9636d79c (Nextcloud Upgrade fixes, 2023-12-13) parameter changed:
 - instance.trusted-domain-* parameters are replaced by instance.trusted-domain-list
 - the frontend is part of trusted domain, so with "bypassed" frontends
from slapos proxy the backend appears twice (because the backend URL is
returned as frontend URL)

This actually updates firefox from version 68 to version 115

So that we can see when something changes.

See merge request nexedi/slapos!1486

Use runTestSuite interface to launch tests that request instances
on actual SlapOS cloud.

As described in https://github.com/msgpack/msgpack-python#major-breaking-changes-in-msgpack-10
raw is False by default for unpacker so we receive strings, not bytes

See merge request nexedi/slapos!1490