Commit f32db64f authored by Kirill Smelkov's avatar Kirill Smelkov

software/ors-amarisoft: Switch *.json.log to emit `data` field via JSON

ORS software-release emits many *.json.log files with information about current
state of eNB and radio units. Those files are used by code in slapos.toolbox to
implement corresponding promises. The files, it seems, try to match JSON Lines
format(*) with every line containing a JSON object describing timestamp, log
level and log payload of corresponding log entry.

So far all is good. One peculiarity, however, is that, contrary to everything
else, the content of the `data` field in the logs is not emitted via
JSON-encoding. Initially, starting from 4968d55c (ors-amarisoft: get eNB stats
and add promises), that `data` payload was being emitted via %s py formatting,
which is similar to what JSON-encoding would produce, but is not it exactly.
For example if log payload is {'abc': 123} then %s and JSON would quote `abc`
differently:

    {'abc': 123}  # %s
    {"abc": 123}  # JSON

That would not be a big deal if what %s produces would be still valid JSON
accepted by JSON-decoder, but unfortunately it is not so: JSONDecodeError is
raised when {'abc': 123} is tried to be decoded.

The code in slapos.toolbox, so far, is handling this situation by feeding to
JSON-decoder original input with ' characters replaced by "

    json.loads(line.decode().replace("'", '"'))     (+)

which more or less works in basic cases, but breaks when log payload contains '
character itself. For example for {"a'bc": 123} replacing gives {"a"bc": 123},
which, being invalid JSON, raises

    JSONDecodeError: Expecting ':' delimiter: line 1 column 5 (char 4)

when fed to json.loads() .

I've actually hit this problem for real with amarisoft-rf-info.json.log where
the data part contains output of `rf_info` looking e.g. as

    TX underflows=0 RX overflows=0
    TRX SDR driver 2023-09-07, API v15/18
    PCIe CPRI /dev/sdr0@0:
      Hardware ID: 0x4b12
      DNA: [0x0048248a334a7054]
      Serial: ''
      FPGA revision: 2023-06-23  10:05:24
      FPGA vccint: 0.98 V
      FPGA vccaux: 1.76 V
      FPGA vccbram: 0.98 V
      FPGA temperature: 71.9 °C
      Clock tune: 0.0 ppm
      NUMA: 0
      CPRI_option: '5' (x8) lock=no
      DMA0: TX fifo: 66.67us  Usage=16/32768 (0%)
      DMA0: RX fifo: 66.67us  Usage=16/32768 (0%)
      DMA0 Underflows: 0
      DMA0 Overflows: 0
    PCIe CPRI /dev/sdr0@1:
      Hardware ID: 0x4b12
      DNA: [0x0048248a334a7054]
      Serial: ''
      FPGA revision: 2023-06-23  10:05:24
      FPGA vccint: 0.98 V
      FPGA vccaux: 1.77 V
      FPGA vccbram: 0.98 V
      FPGA temperature: 71.7 °C
      Clock tune: 0.0 ppm
      NUMA: 0
      CPRI_option: '5' (x8) lock=HW+SW rx/tx=46.606us
        Port #0: T14=46.606us
      DMA0: TX fifo: 66.67us  Usage=16/32768 (0%)
      DMA0: RX fifo: 66.67us  Usage=16/32768 (0%)
      DMA0 Underflows: 0
      DMA0 Overflows: 0

which lead to breakage when trying to load that log due to ' symbols.

The fix is simple: change the code, that emits *.json.log to emit data payload
via json.dumps instead of %s. We can do that without breaking anything because,
contrary to enb.xlog, those *.json.log are not uploaded to any separate system
and currently are only used to implement promises without preserving log files
in any storage for any non-small amount of time. In other words, currently
those *.json.log are temporary files whose format can be adjusted without
strongly caring about backward compatibility.

b32b4a8e (software/ors-amarisoft: general improvement for RU (logs/promises/input parameters))
already changed %s to json.dumps for amarisoft-stats.json.log , but left all other logs at %s.

-> Fix this for everything by replacing %s to json.dumps in all generated logs.
-> Corresponding slapos.toolbox adjustments are in nexedi/slapos.toolbox!120.

/reviewed-on nexedi/slapos!1447
/reviewed-by @jhuge, @jerome, @tomo
/cc @lu.xu, @xavier_thompson, @Daetalus

(*) https://jsonlines.org/
(+) see e.g. https://lab.nexedi.com/nexedi/slapos.toolbox/blob/453dce5f/slapos/promise/plugin/util.py#L50
parent 2921d965
......@@ -49,7 +49,7 @@ class enbWebSocket:
"rf_info": True
})
r = self.recv('rf')
self.logger.info('RF info', extra={'data': r})
self.logger.info('RF info', extra={'data': json.dumps(r)})
if __name__ == '__main__':
ws = enbWebSocket()
......
......@@ -24,11 +24,11 @@ md5sum = c4d5e9fcf460d88bc2b4bcfbdfe554f7
[amarisoft-rf-info.jinja2.py]
_update_hash_filename_ = amarisoft-rf-info.jinja2.py
md5sum = c930c28365c685a6066f382c9b5d8893
md5sum = ab666fdfadbfc7d8a16ace38d295c883
[ncclient_common]
_update_hash_filename_ = ncclient_common.py
md5sum = f34a196e947fa58b141431a00cc744df
md5sum = 63316f6a8a6a480e10db7e78cca72f3b
[lopcomm-rrh-stats.jinja2.py]
_update_hash_filename_ = lopcomm-rrh-stats.jinja2.py
......@@ -40,11 +40,11 @@ md5sum = f2f550b68c8ab243ce1a4bb73a9abc1c
[lopcomm-rrh-software.jinja2.py]
_update_hash_filename_ = lopcomm-rrh-software.jinja2.py
md5sum = 860fa5e5bab65f414535c7e25f622a6c
md5sum = 2cd8515253b75e2ab13cc77399762851
[lopcomm-rrh-supervision.jinja2.py]
_update_hash_filename_ = lopcomm-rrh-supervision.jinja2.py
md5sum = a2ba0343ddb7f9cf2904a4c5c751f68a
md5sum = 243d9fbf640b8dc8bf63d69b07b8afed
[template-enb]
_update_hash_filename_ = instance-enb.jinja2.cfg
......
#!{{ python_path }}
import time
import json
import xmltodict
import sys
import re
......@@ -60,7 +61,7 @@ if __name__ == '__main__':
if download_reply_xml:
nc.logger.info("Download proceed.")
download_data = xmltodict.parse(download_reply_xml)
nc.software_reply_json_logger.info('', extra={'data': download_data})
nc.software_reply_json_logger.info('', extra={'data': json.dumps(download_data)})
install_rpc_xml = f"""
<software-install xmlns="urn:o-ran:software-management:1.0">
......@@ -74,7 +75,7 @@ if __name__ == '__main__':
if install_reply_xml:
nc.logger.info("Installation proceed.")
install_data = xmltodict.parse(install_reply_xml)
nc.software_reply_json_logger.info('', extra={'data': install_data})
nc.software_reply_json_logger.info('', extra={'data': json.dumps(install_data)})
if nonrunning_slot_name_build_version in "{{firmware_name}}":
activate_rpc_xml = f"""
......@@ -88,7 +89,7 @@ if __name__ == '__main__':
if activate_reply_xml:
nc.logger.info("Activation proceed.")
activate_data = xmltodict.parse(activate_reply_xml)
nc.software_reply_json_logger.info('', extra={'data': activate_data})
nc.software_reply_json_logger.info('', extra={'data': json.dumps(activate_data)})
nc.get_inventory()
if nonrunning_slot_name_build_version in "{{firmware_name}}" and active_nonrunning_slot_name:
......
#!{{ python_path }}
import time
import json
import xmltodict
import sys
import re
......@@ -27,7 +28,7 @@ if __name__ == '__main__':
if supervision_subscription_reply_xml:
nc.logger.info("Subscription created")
supervision_subscription_data = xmltodict.parse(supervision_subscription_reply_xml)
nc.supervision_reply_json_logger.info('', extra={'data': supervision_subscription_data})
nc.supervision_reply_json_logger.info('', extra={'data': json.dumps(supervision_subscription_data)})
while True:
supervision_watchdog_rpc_xml = """
<supervision-watchdog-reset xmlns="urn:o-ran:supervision:1.0">
......@@ -43,7 +44,7 @@ if __name__ == '__main__':
nc.logger.info("NETCONF server replied")
supervision_watchdog_data = xmltodict.parse(supervision_watchdog_reply_xml)
nc.supervision_reply_json_logger.info('', extra={'data': supervision_watchdog_data})
nc.supervision_reply_json_logger.info('', extra={'data': json.dumps(supervision_watchdog_data)})
# It must be the same interval as <supervision-notification-interval>
time.sleep(60)
else:
......
import time
import logging
import json
import xmltodict
from logging.handlers import RotatingFileHandler
from ncclient import manager
......@@ -111,15 +112,15 @@ class LopcommNetconfClient:
result_in_xml = result._raw
data_dict = xmltodict.parse(result_in_xml)
if 'alarm-notif' in data_dict['notification']:
self.json_logger.info('', extra={'data': data_dict})
self.json_logger.info('', extra={'data': json.dumps(data_dict)})
elif 'supervision-notification' in data_dict['notification']:
self.supervision_json_logger.info('', extra={'data': data_dict})
self.supervision_json_logger.info('', extra={'data': json.dumps(data_dict)})
elif 'netconf-session-start' in data_dict['notification'] or 'netconf-session-end' in data_dict['notification']:
self.ncsession_json_logger.info('', extra={'data': data_dict})
self.ncsession_json_logger.info('', extra={'data': json.dumps(data_dict)})
elif any(event in data_dict['notification'] for event in ['install-event', 'activation-event', 'download-event']):
self.software_json_logger.info('', extra={'data': data_dict})
self.software_json_logger.info('', extra={'data': json.dumps(data_dict)})
else:
self.cfg_json_logger.info('', extra={'data': data_dict})
self.cfg_json_logger.info('', extra={'data': json.dumps(data_dict)})
def edit_config(self, config_files):
for config_file in config_files:
with open(config_file) as f:
......@@ -152,7 +153,7 @@ class LopcommNetconfClient:
reset_reply_xml = self.custom_rpc_request(reset_rpc_xml)
if reset_reply_xml:
reset_data = xmltodict.parse(reset_reply_xml)
self.software_reply_json_logger.info('', extra={'data': reset_data})
self.software_reply_json_logger.info('', extra={'data': json.dumps(reset_data)})
self.logger.info('Wait 60 second then reboot!')
time.sleep(60)
......@@ -169,7 +170,7 @@ class LopcommNetconfClient:
if inventory_reply_xml:
self.logger.info('Finish fetching software inventory.')
inventory_data = xmltodict.parse(inventory_reply_xml)
self.software_reply_json_logger.info('', extra={'data': inventory_data})
self.software_reply_json_logger.info('', extra={'data': json.dumps(inventory_data)})
nonrunning_slot_name = None
running_slot_name = None
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment