We already have point-to-multipoint flow control within a group. But
we even need the opposite; -a scheme which can handle that potentially
hundreds of sources may try to send messages to the same destination
simultaneously without causing buffer overflow at the recipient. This
commit adds such a mechanism.

The algorithm works as follows:

- When a member detects a new, joining member, it initially set its
  state to JOINED and advertises a minimum window to the new member.
  This window is chosen so that the new member can send exactly one
  maximum sized message, or several smaller ones, to the recipient
  before it must stop and wait for an additional advertisement. This
  minimum window ADV_IDLE is set to 65 1kB blocks.

- When a member receives the first data message from a JOINED member,
  it changes the state of the latter to ACTIVE, and advertises a larger
  window ADV_ACTIVE = 12 x ADV_IDLE blocks to the sender, so it can
  continue sending with minimal disturbances to the data flow.

- The active members are kept in a dedicated linked list. Each time a
  message is received from an active member, it will be moved to the
  tail of that list. This way, we keep a record of which members have
  been most (tail) and least (head) recently active.

- There is a maximum number (16) of permitted simultaneous active
  senders per receiver. When this limit is reached, the receiver will
  not advertise anything immediately to a new sender, but instead put
  it in a PENDING state, and add it to a corresponding queue. At the
  same time, it will pick the least recently active member, send it an
  advertisement RECLAIM message, and set this member to state
  RECLAIMING.

- The reclaimee member has to respond with a REMIT message, meaning that
  it goes back to a send window of ADV_IDLE, and returns its unused
  advertised blocks beyond that value to the reclaiming member.

- When the reclaiming member receives the REMIT message, it unlinks
  the reclaimee from its active list, resets its state to JOINED, and
  notes that it is now back at ADV_IDLE advertised blocks to that
  member. If there are still unread data messages sent out by
  reclaimee before the REMIT, the member goes into an intermediate
  state REMITTED, where it stays until the said messages have been
  consumed.

- The returned advertised blocks can now be re-advertised to the
  pending member, which is now set to state ACTIVE and added to
  the active member list.

- To be proactive, i.e., to minimize the risk that any member will
  end up in the pending queue, we start reclaiming resources already
  when the number of active members exceeds 3/4 of the permitted
  maximum.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>