Do not rely on vendor version field of the CSPs to determine if we are in a
FA-PWWN environment. Instead, use the following procedure:

First, during HBA initialization, driver does a READ_CONFIG to determine if
FA-PWWN is configured on the HBA. A LPFC_FAWWPN_CONFIG hba_flag is set
accordingly.

Next, when the link comes up before the driver gets a link up event, the
firmware logs into the fabric with FA-PWWN. If the fabric port does not
support FA-PWWN, the driver will get a Misconfigured FA-WWN async event
before the link up. A LPFC_FAWWPN_FABRIC hba_flag will be set accordingly.

Finally, if the fabric supports FA-PWWN, the firmware will replace its CSPs
WWN with the Fabric Assigned ones. Then after link up, the driver will
retrieve the Fabric Assigned WWN when it does a READ_SPARAM mbox command.

Link: https://lore.kernel.org/r/20220412222008.126521-23-jsmart2021@gmail.comCo-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>