• Peng Chen's avatar
    Bluetooth: add support for atheros 0489:e057 · 2096ae6c
    Peng Chen authored
        Add support for the AR3012 chip found on Fioxconn.
    
        usb-devices shows:
    
        T:  Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 44 Spd=12   MxCh= 0
        D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
        P:  Vendor=0489 ProdID=e057 Rev= 0.02
        C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
        I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
        E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
        E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
        E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
        I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
        E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
        E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
        I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
        E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
        E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
        I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
        E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
        E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
        I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
        E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
        E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
        I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
        E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
        E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
        I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
        E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
        E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
    Signed-off-by: default avatarPeng Chen <pengchen@qca.qualcomm.com>
    Signed-off-by: default avatarGustavo Padovan <gustavo.padovan@collabora.co.uk>
    2096ae6c
ath3k.c 11.2 KB