• Stephan Gerhold's avatar
    arm64: dts: qcom: msm8916: Set default pinctrl for blsp1_uart1/2 · b0d330c2
    Stephan Gerhold authored
    Right now some device nodes set default pinctrl within msm8916.dtsi
    (e.g. I2C, SPI), but for others it needs to be explicitly set in the
    board-specific device tree (e.g. UART).
    
    While it is theoretically possible that some super special board
    needs different pinctrl for these, in practice pretty much every
    board ends up using the common pinctrl definitions.
    
    Make this consistent by also defining the common pinctrl properties
    for blsp1_uart1 and blsp1_uart2 so we don't need to copy this for every
    board. If there is really such a super special board it could just
    override these properties with custom pinctrl or make minor modifications
    to the common pinctrl configurations provided by msm8916-pins.dtsi.
    
    Also move #address-cells/#size-cells for &dsi0 to msm8916.dtsi
    since this is specific to the DSI node, not the board.
    Signed-off-by: default avatarStephan Gerhold <stephan@gerhold.net>
    Link: https://lore.kernel.org/r/20200720085406.6716-10-stephan@gerhold.netSigned-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
    b0d330c2
msm8916-mtp.dtsi 300 Bytes