• Doug Berger's avatar
    net: bcmgenet: remove bcmgenet_internal_phy_setup() · 2f94dd54
    Doug Berger authored
    [ Upstream commit 31739eae ]
    
    Commit 6ac3ce82 ("net: bcmgenet: Remove excessive PHY reset")
    removed the bcmgenet_mii_reset() function from bcmgenet_power_up() and
    bcmgenet_internal_phy_setup() functions.  In so doing it broke the reset
    of the internal PHY devices used by the GENETv1-GENETv3 which required
    this reset before the UniMAC was enabled.  It also broke the internal
    GPHY devices used by the GENETv4 because the config_init that installed
    the AFE workaround was no longer occurring after the reset of the GPHY
    performed by bcmgenet_phy_power_set() in bcmgenet_internal_phy_setup().
    In addition the code in bcmgenet_internal_phy_setup() related to the
    "enable APD" comment goes with the bcmgenet_mii_reset() so it should
    have also been removed.
    
    Commit bd4060a6 ("net: bcmgenet: Power on integrated GPHY in
    bcmgenet_power_up()") moved the bcmgenet_phy_power_set() call to the
    bcmgenet_power_up() function, but failed to remove it from the
    bcmgenet_internal_phy_setup() function.  Had it done so, the
    bcmgenet_internal_phy_setup() function would have been empty and could
    have been removed at that time.
    
    Commit 5dbebbb4 ("net: bcmgenet: Software reset EPHY after power on")
    was submitted to correct the functional problems introduced by
    commit 6ac3ce82 ("net: bcmgenet: Remove excessive PHY reset"). It
    was included in v4.4 and made available on 4.3-stable. Unfortunately,
    it didn't fully revert the commit because this bcmgenet_mii_reset()
    doesn't apply the soft reset to the internal GPHY used by GENETv4 like
    the previous one did. This prevents the restoration of the AFE work-
    arounds for internal GPHY devices after the bcmgenet_phy_power_set() in
    bcmgenet_internal_phy_setup().
    
    This commit takes the alternate approach of removing the unnecessary
    bcmgenet_internal_phy_setup() function which shouldn't have been in v4.3
    so that when bcmgenet_mii_reset() was restored it should have only gone
    into bcmgenet_power_up().  This will avoid the problems while also
    removing the redundancy (and hopefully some of the confusion).
    
    Fixes: 6ac3ce82 ("net: bcmgenet: Remove excessive PHY reset")
    Signed-off-by: default avatarDoug Berger <opendmb@gmail.com>
    Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
    Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
    Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
    2f94dd54
bcmmii.c 16.4 KB