The display engine does not snoop the caches so we should mark
the DSB command buffer as I915_CACHE_NONE.
i915_gem_object_create_internal() always gives us I915_CACHE_LLC
on LLC platforms. And to make things 100% correct we should also
clflush at the end, if necessary.

Note that currently this is a non-issue as we always write the
command buffer through a WC mapping, so a cache flush is not actually
needed. But we might actually want to consider a WB mapping since
we also end up reading from the command buffer (in the indexed
reg write handling). Either that or we should do something else
to avoid those reads (might actually be even more sensible on DGFX
since we end up reading over PCIe). But we should measure the overhead
first...

Anyways, no real harm in adding the belts and suspenders here so
that the code will work correctly regardless of how we map the
buffer. If we do get a WC mapping (as we request)
i915_gem_object_flush_map() will be a nop. Well, apart form
a wmb() which may just flush the WC buffer a bit earlier
than would otherwise happen (at the latest the mmio accesses
would trigger the WC flush).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009132204.15098-2-ville.syrjala@linux.intel.comReviewed-by: Uma Shankar <uma.shankar@intel.com>