• Chen-Yu Tsai's avatar
    rtc: sun6i: Add support for different variants · 403a3c3d
    Chen-Yu Tsai authored
    Amongst the Allwinner SoCs that have seen some kind of coverage by the
    linux-sunxi community, whether it be mainline Linux or U-boot support,
    or just available datasheets, most newer chips use the RTC design first
    seen in the A31 (sun6i).
    
    Overall there have been some minor differences. This patch covers the
    following:
    
      - average clock rate of the internal RC oscillator
        + presence of fixed and adjustable prescaler for this clock
      - availability of an external (to the SoC) clock output
    
    One major difference regarding the H6 is the 24 MHz crystal is now
    routed through the RTC, as a digitally compensated oscillator (DCXO).
    This is not covered in this patch and will be supported later.
    
    Other differences are either unrelated to RTC or clock functionality,
    such as boot or crypto related registers, or the driver simply doesn't
    use the feature in question. One example of the latter is the
    calibration function for the RC oscillator. We consider this clock to
    be very bad and avoid using it.
    Acked-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
    Tested-by: default avatarCorentin Labbe <clabbe.montjoie@gmail.com>
    Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
    Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@bootlin.com>
    403a3c3d
rtc-sun6i.c 16.5 KB