i.MX device tree changes for 5.1:
 - New board support: Logic PD i.MX6QD EVM, ZII SSMB DTU, Phytec
   phyBOARD i.MX6UL Segin, Y Soft IOTA Draco, Hydra and Ursa boards.
 - Add regulator control for various sensors on imx6qdl-sabresd board.
 - Add DISPLAY power domain support for i.MX6SX SoC.
 - Add stmpe-adc device node for Toradex iMX6 module.
 - Switch to SPDX identifier for imx6q-tbs2910 board.
 - Add proper ksz9031 clock skew values for imx6qdl-phytec-pfla02 board.
 - Mark I2C recovery GPIOs as open drain and correct and WEIM range
   configuration for apalis/colibri boards.
 - Small and random updates to various devices.

* tag 'imx-dt-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (31 commits)
  ARM: dts: imx: Add support for Logic PD i.MX6QD EVM
  ARM: dts: imx6qdl-sabresd: remove reg_sensors' regulator-always-on
  ARM: dts: imx6qdl-sabresd: add regulators control for mma8451 sensor
  ARM: dts: imx6qdl-sabresd: add regulators control for mag3110 sensor
  ARM: dts: imx6qdl-sabresd: add regulator control for isl29023 sensor
  ARM: dts: vf610: Add ZII SSMB DTU board
  ARM: dts: pfla02: add ksz9031 clock skew values
  ARM: dts: imx6qdl-phytec-pfla02: add missing interrupt-controller property
  ARM: dts: Add stmpe-adc DT node to Toradex iMX6 modules
  ARM: dts: Add devicetree compatibles for LS1021A based boards
  ARM: dts: colibri: use valid range configuration for weim
  ARM: dts: imx6: Add support for Phytec phyBOARD i.MX6UL Segin
  ARM: dts: imx6*-apalis/-colibri: mark I2C recovery GPIOs as open drain
  ARM: dts: vf610-zii-ssmb-spu3: Pass "no-sdio"/"no-sd" properties
  ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards
  ARM: dts: imx7ulp: add sim node
  ARM: dts: imx6ull: change to use new compatible "fsl,imx6ull-usdhc" for usdhc
  ARM: dts: imx6ull: Fix i.MX6ULL/ULZ ocotp compatible
  ARM: dts: imx6sx: Add DISPLAY power domain support
  ARM: dts: i.MX51: digi-connectcore-som: Add support for I2C bus recovery
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>