In a system(Huawei Ascend ARM64 SoC) using HBM, a multi-bit ECC error
occurs, and the BIOS will mark the corresponding area (for example, 2 MB)
as unusable.  When the system restarts next time, these areas are not
reported or reported as EFI_UNUSABLE_MEMORY.  Both cases lead to an
increase in the number of memblocks, whereas EFI_UNUSABLE_MEMORY leads to
a larger number of memblocks.

For example, if the EFI_UNUSABLE_MEMORY type is reported:
...
memory[0x92]    [0x0000200834a00000-0x0000200835bfffff], 0x0000000001200000 bytes on node 7 flags: 0x0
memory[0x93]    [0x0000200835c00000-0x0000200835dfffff], 0x0000000000200000 bytes on node 7 flags: 0x4
memory[0x94]    [0x0000200835e00000-0x00002008367fffff], 0x0000000000a00000 bytes on node 7 flags: 0x0
memory[0x95]    [0x0000200836800000-0x00002008369fffff], 0x0000000000200000 bytes on node 7 flags: 0x4
memory[0x96]    [0x0000200836a00000-0x0000200837bfffff], 0x0000000001200000 bytes on node 7 flags: 0x0
memory[0x97]    [0x0000200837c00000-0x0000200837dfffff], 0x0000000000200000 bytes on node 7 flags: 0x4
memory[0x98]    [0x0000200837e00000-0x000020087fffffff], 0x0000000048200000 bytes on node 7 flags: 0x0
memory[0x99]    [0x0000200880000000-0x0000200bcfffffff], 0x0000000350000000 bytes on node 6 flags: 0x0
memory[0x9a]    [0x0000200bd0000000-0x0000200bd01fffff], 0x0000000000200000 bytes on node 6 flags: 0x4
memory[0x9b]    [0x0000200bd0200000-0x0000200bd07fffff], 0x0000000000600000 bytes on node 6 flags: 0x0
memory[0x9c]    [0x0000200bd0800000-0x0000200bd09fffff], 0x0000000000200000 bytes on node 6 flags: 0x4
memory[0x9d]    [0x0000200bd0a00000-0x0000200fcfffffff], 0x00000003ff600000 bytes on node 6 flags: 0x0
memory[0x9e]    [0x0000200fd0000000-0x0000200fd01fffff], 0x0000000000200000 bytes on node 6 flags: 0x4
memory[0x9f]    [0x0000200fd0200000-0x0000200fffffffff], 0x000000002fe00000 bytes on node 6 flags: 0x0
...

The EFI memory map is parsed to construct the memblock arrays before the
memblock arrays can be resized.  As the result, memory regions beyond
INIT_MEMBLOCK_REGIONS are lost.

Add a new macro INIT_MEMBLOCK_MEMORY_REGIONS to replace
INIT_MEMBLOCK_REGTIONS to define the size of the static memblock.memory
array.

Allow overriding memblock.memory array size with architecture defined
INIT_MEMBLOCK_MEMORY_REGIONS and make arm64 to set
INIT_MEMBLOCK_MEMORY_REGIONS to 1024 when CONFIG_EFI is enabled.

Link: https://lkml.kernel.org/r/20220615102742.96450-1-zhouguanghui1@huawei.comSigned-off-by: Zhou Guanghui <zhouguanghui1@huawei.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Darren Hart <darren@os.amperecomputing.com>
Acked-by: Will Deacon <will@kernel.org>		[arm64]
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Xu Qiang <xuqiang36@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>