• Andrew Lunn's avatar
    phy_device: Move phy attributes into phy_device · 5cf11bee
    Andrew Lunn authored
    The mdio_bus exports three attributes:
    
    - PHY ID is the unique 32-bits identifier for a MDIO device implementing
      standard MII registers MII_PHYSID1/2, which is not guaranteed to be the
      case for non-standard compliant devices (e.g: Ethernet switches)
    
    - PHY interface describes the data-path of the PHY/MDIO device, which is
      not strictly a PHY thing, but is required and needed for PHY devices to
      function, a MDIO device could be a control device exclusively
    
    - PHY has fixups describes what the PHY driver may have done, so
      completely PHY specific
    
    These are all phy attributes, not generic mdio attributes. So move the
    attributes into the phy device code.
    Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
    Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
    Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
    5cf11bee
mdio_bus.c 16.5 KB