• Jon Hunter's avatar
    ARM: OMAP4: clockdomain/CM code: Update supported transition modes · 65aa94b2
    Jon Hunter authored
    For OMAP3+ devices, the clock domains (CLKDMs) support one or more of the
    following transition modes ...
    
    NO_SLEEP (0x0) - A clock domain sleep transition is never initiated,
    		 irrespective of the hardware conditions.
    SW_SLEEP (0x1) - A software-forced sleep transition. The transition is initiated
    		 when the associated hardware conditions are satisfied
    SW_WKUP  (0x2) - A software-forced clock domain wake-up transition is initiated,
    		 irrespective of the hardware conditions.
    HW_AUTO  (0x3) - Hardware-controlled automatic sleep and wake-up transition is
    		 initiated by the PRCM module when the associated hardware
    		 conditions are satisfied.
    
    For OMAP4 devices, SW_SLEEP is equivalent to HW_AUTO and NO_SLEEP is equivalent
    to SW_WKUP. The only difference between HW_AUTO and SW_SLEEP for OMAP4 devices
    is that the PRM_IRQSTATUS_MPU.TRANSITION_ST interrupt status is set in case of
    SW_SLEEP transition, and not set in case of HW_AUTO transition.
    
    For OMAP4 devices, all CLKDMs support HW_AUTO and therefore we can place the
    CLKDMs in the HW_AUTO state instead of the SW_SLEEP mode. Hence, we do not
    need to use the SW_SLEEP mode. With regard to NO_SLEEP and SW_WKUP it is
    preferred to use SW_WKUP mode if the CLKDM supports it and so use this mode
    instead of NO_SLEEP where possible.
    
    For a software perspective the above 4 modes are represented by the following
    flags to indicate what modes are supported by each of the CLKDMs.
    
    CLKDM_CAN_DISABLE_AUTO	--> NO_SLEEP
    CLKDM_CAN_ENABLE_AUTO	--> HW_AUTO
    CLKDM_CAN_FORCE_SLEEP	--> SW_SLEEP
    CLKDM_CAN_FORCE_WAKEUP	--> SW_WKUP
    
    By eliminating the SW_SLEEP mode the the mapping of the flags for OMAP4 devices
    can becomes ...
    
    CLKDM_CAN_DISABLE_AUTO	--> NO_SLEEP
    CLKDM_CAN_ENABLE_AUTO	--> HW_AUTO
    CLKDM_CAN_FORCE_SLEEP	--> HW_AUTO
    CLKDM_CAN_FORCE_WAKEUP	--> SW_WKUP
    
    Cc: Ming Lei <ming.lei@canonical.com>
    Cc: Will Deacon <will.deacon@arm.com>
    Cc: Benoit Cousson <b-cousson@ti.com>
    Cc: Paul Walmsley <paul@pwsan.com>
    Cc: Kevin Hilman <khilman@ti.com>
    Reviewed-by: default avatarBenoit Cousson <b-cousson@ti.com>
    Reviewed-by: default avatarSantosh Shilimkar <santosh.shilimkar@ti.com>
    Signed-off-by: default avatarJon Hunter <jon-hunter@ti.com>
    Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
    65aa94b2
cminst44xx.c 10.6 KB