• Paul A. Clarke's avatar
    [PATCH] matroxfb: fix DVI setup to be more compatible · 6d39bedc
    Paul A. Clarke authored
    There has been a longstanding problem with the Matrox G450 and perhaps
    other similar cards, with modes "above" 1280x1024-60 on ppc/ppc64 boxes
    running Linux.  Higher resolutions and/or higher refresh rates resulted in
    a very noticably "jittery" display, and sometimes no display, depending on
    the physical monitor.  This patch fixes that problem on the systems I have
    easy access to...
    
    I've tested with SLES9SP3 (2.6.5+ kernel) and 2.6.16-rc6 custom kernels on
    an IBM eServer p5 520 w/G450 (a.k.a GXT135P on IBM's ppc64 systems), and a
    colleague of mine (Ian Romanick) tested it successfully on an Apple ppc32
    box (w/GXT135P).  I also tested it on IA32 box I have with a GXT135P to
    verify that it didn't obviously break anything.  In my testing, I covered
    single-card, single and dual-head setups using both HD15 and DVI-D signals,
    on both the IA32 and ppc64 boxes.  While everything appeared fine on both
    boxes, I did encounter one problem: I can't get any signal on the DVI-D
    output on the ppc64 box.  However, this is also the case without my patch.
    
    I just noticed that screen-blanking only occurs on the primary display as
    well.
    Signed-off-by: default avatarPaul A. Clarke <pc@us.ibm.com>
    Signed-off-by: default avatarIan Romanick <idr@us.ibm.com>
    Signed-off-by: default avatarPetr Vandrovec <petr@vandrovec.name>
    Cc: "Antonino A. Daplas" <adaplas@pol.net>
    Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
    Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
    6d39bedc
g450_pll.c 12.6 KB