• Tejun Heo's avatar
    ahci/pata_jmicron: fix JMicron quirk · 77280989
    Tejun Heo authored
    For all JMicrons except for 361 and 368, AHCI mode enable bits in the
    Control(1) should be set.  This used to be done in both ahci and
    pata_jmicron but while moving programming to PCI quirk, it was removed
    from ahci part while still left in pata_jmicron.
    
    The implemented JMicron PCI quirk was incorrect in that it didn't
    program AHCI mode enable bits.  If pata_jmicron is loaded first and
    programs those bits, the ahci ports work; otherwise, ahci device
    detection fails miserably.
    
    This patch makes JMicron PCI quirk clear SATA IDE mode bits and set
    AHCI mode bits and remove the respective part from pata_jmicron.
    Tested on JMB361, 363 and 368.
    Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
    Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
    77280989
pata_jmicron.c 7.19 KB