The TVE200 will occasionally print a bunch of lost interrupts
and similar dmesg messages, sometimes during boot and sometimes
after disabling and coming back to enablement. This is probably
because the hardware is left in an unknown state by the boot
loader that displays a logo.

This can be fixed by bringing the controller into a known state
by resetting the controller while enabling it. We retry reset 5
times like the vendor driver does. We also put the controller
into reset before de-clocking it and clear all interrupts before
enabling the vblank IRQ.

This makes the video enable/disable/enable cycle rock solid
on the D-Link DIR-685. Tested extensively.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200820203144.271081-1-linus.walleij@linaro.org